Cool little Selenium planet

My "Engineering mats" tank are nearly full as I did lots over 2 or 3 years ago.
So here is a question as I haven't gathered stuff recently :
Isn't it more efficient to gather G5 stuff from those crystalline structure things and then trade it for what you want ?
 
You can still use your standard laser mining ship without removing the refinery. Just turn the refinery off. This way you will not realise that you are missing a refinery next time you want to mine for other stuff.

I tried that, the limpets collected and reported refinery full.

Thanks for all the tips here btw, really great help ta.
 
If surface prospecting becomes too much, I’ve a tip for rapid mat. gathering from asteroids.


Delkar A 7 ring 2 (rocky) Res. Site drops Selenium.

Take a manoeuvrable ship with collectors, limpets and the largest prospector possible. The Clipper is perfect allowing for 80 limpets and an A7 Prospector which prompts the largest yields.

Res sites also prompt larger yields. Pristine/Haz Res being the most bountifull.


Here is the trick DON’T fit a refinery. The limpets then focus solely on mats you aren’t full of. The pirates leave you alone because you have nothing in the hold.

Very rare mats also drop surprisingly often.

Each ring type in differing locations drop different ranges and types of mat.


Enjoy and let me know if you have or find any other ring sites for other useful mats, or any comments and improvements.

Strangepork.

Thanks Pork. I've gotten a lot of mats mining, but never dawned on me to go just for mats. I'll give it a try. lol
As for the prospector controller, you saying A7 is better than say an A4 or A1 at yields? I though only the class
makes a difference and not the size. That would put smaller ships at a big disadvantage.
X.
 
If you want to fill your Selenium by swapping your other high grade mats you'll need a few trips out to HIP 36601 .
I had quite a few mats from normal prospecting and I took 2 trips to fill all except Selenium which would have taken another 2 trips.
Was much easier to go to the geo Selenium planet instead and MUCH closer to the bubble.
My "Engineering mats" tank are nearly full as I did lots over 2 or 3 years ago.
So here is a question as I haven't gathered stuff recently :
Isn't it more efficient to gather G5 stuff from those crystalline structure things and then trade it for what you want ?
 
My "Engineering mats" tank are nearly full as I did lots over 2 or 3 years ago.
So here is a question as I haven't gathered stuff recently :
Isn't it more efficient to gather G5 stuff from those crystalline structure things and then trade it for what you want ?
Im certainly doing that now mostly for synthasis my earlier mat collection (Raw) was pre engineering mining and just happened if i remembered to trade up each time
 
I hope no one minds if i add this from another thread - be nice having everything in one place .
I do this exact method as well been tell people how good it is! Thanks for sharing cmdr o7
Just did two trips here the other day!

View attachment 126016

I use alot of the locations listed on the Wiki HERE

Great Location!​
SYSTEMPLANETGRAVITYLY - SOLLS - ARIVMATERIALS
HIP 36601C 1 a0.09 G1,599154,099Polonium
HIP 36601C 1 d0.08 G1,599154,104Ruthenium
HIP 36601C 3 b0.04 G1,599154,145Tellurium
HIP 36601C 5 a0.03 G1,599154,288Technetium
Additionally i go hear for the other materials​
Outotz LS-K d8-3B 5 a0.09 G1,714310,420Yttrium
Outotz LS-K d8-3B 5 c0.07 G1,714310,420Antimony
 
Selenium Field on Body 3 b A , Geological Signal (16) http://edtools.ddns.net/selenium?s=sol
Star system: HIP 83204
low grav but not too low , very nice to navigate, boosting and going high speed no problem, almost no annoying rocks or bumps that
screw around with your SRV. Absolutely unobstructed landing possible with large ships without even having to bother to look for a proper spot.
 
Last edited:
Isn't it more efficient to gather G5 stuff from those crystalline structure things and then trade it for what you want ?
To underline what others have said:
- For raw materials, the highest grade is G4. Those can generally be gathered from crystal shard sites - apart from selenium, which is the only G4 raw material that cannot be had from a crystal shard site. As such, you would trade at a 6->1 rate for selenium. For all G3 raw materials, I would trade down from the G4 raw material in the same category so the lower grade bins are full. I would then go out to the crystal shards to fill up all the G4 bins (except selenium, which is filled separately).
 
Thanks Pork. I've gotten a lot of mats mining, but never dawned on me to go just for mats. I'll give it a try. lol
As for the prospector controller, you saying A7 is better than say an A4 or A1 at yields? I though only the class
makes a difference and not the size. That would put smaller ships at a big disadvantage.
X.

From a dude on r/eliteminers, who seems pretty well informed...

There has to be some reason a Corvette is 5000x more expensive than a Sidey.
 
...if I provide a link, are you then going to ask him where he got the information from, then what, where does that end. If you are interested test it in game.
I want a link to a statement supporting what you are claiming. It is a quite standard procedure when you make a claim that goes right against the general consensus on EliteMiners, which is that what matters is prospector class. This is also why the EliteMiners pre-flight checklist tells you to fit an A-rated prospector - not the largest possible A-rated you can fit.

In addition, the Elite Wiki has the following to say:
An A-rated Prospector Controller of any number class (1, 3, 5, 7) has the same increase to fragment yield.
Now to contrast that, we have you claiming ”you heard from someone”.
 
Last edited:
I want a link to a statement supporting what you are claiming. It is a quite standard procedure when you make a claim that goes right against the general consensus on EliteMiners, which is that what matters is prospector class. This is also why the EliteMiners pre-flight checklist tells you to fit an A-rated prospector - not the largest possible A-rated you can fit.

In addition, the Elite Wiki has the following to say:

Now to contrast that, we have you claiming ”you heard from someone”.

Hey relax man nobody's died, right? Here is one of the sources, rather ambiguous on second reading. A further one mentioned the A7 specifically. It's cool you care so much about accuracy.

" Also keep in mind that the higher the prospector controller you have the higher yields the asteroid will give, it won't however change the quality of the mats but simply spawn more fragments increasing the chance for mats to drop."

Source: https://www.reddit.com/r/EliteMiners/comments/4qpkft/mining_materials_like_a_pro/

Thanks for clearing that up.
 
Last edited:
Hey relax man nobody's died, right? Here is one of the sources, rather ambiguous on second reading. A further one mentioned the A7 specifically. It's cool you care so much about accuracy.

" Also keep in mind that the higher the prospector controller you have the higher yields the asteroid will give, it won't however change the quality of the mats but simply spawn more fragments increasing the chance for mats to drop."

Source: https://www.reddit.com/r/EliteMiners/comments/4qpkft/mining_materials_like_a_pro/

Thanks for clearing that up.
The ”higher” here refers to prospector class, not size.
 

Deleted member 121570

D
Don't forget too that you can just collect surface mats from volcanic sites very easily in a Sidewinder, without SRV.
Just fly down, eyeball the nodes, shoot em off with a pulse laser and scoop em up.
You can strip a field a hell of a lot faster in a ship than an SRV, and it's fun :)
 
Back
Top Bottom