Page 34 of 40 FirstFirst ... 24303132333435363738 ... LastLast
Results 496 to 510 of 597

Thread: EDEngineer - an overlay to track your blueprint progress in realtime

  1. #496
    Hello Guys,

    Just downloaded and upgraded to latest version and noticed that my totals for Data and Mats are not increasing when i get mission rewards. Also the shopping list totals don't go up on Mission rewards.

    However, the totals increase when i collect Data/Mats from USS. Not tested Mining or SRV surface collection. I can't use ED Engineer in this state guys as i am hammering the missions to get my high value resources up. All my totals are now out as i only noticed this about 20 mins ago from updating yesterday.

    Any Advice?

    Thanks Guys, been using EDEngineer since almost its incarnation.

  2. #497
    Is there a version later than v1.0.9.1?

    On this version, I've noticed that if you trade materials at a Materials Trader, it deletes any gained materials instead of adding them. In my case, proto light alloys and proto radiolic alloys (I can't remember what I traded for them unfortunately). EDEngineer now thinks I can't engineer my lightweight heatsinks, while the in-game GUI reads right. I'll let you know what it thinks after I actually engineer them

    Edit : Yup, that also deletes. I now have -4 proto light alloys and -8 proto radiolic alloys after engineering my heatsinks

  3. #498
    yes, latest version is 1.0.9.7
    many issue fixes including material trader issue as well as the mission completed problem Wasp0 was talking about

    keep an eye on https://github.com/msarilar/EDEngineer/releases and https://github.com/msarilar/EDEngineer/commits/master ("hotfix" means an update that doesn't warrant release notes nor to be in the releases)

  4. #499
    Originally Posted by CMDR HG View Post (Source)
    yes, latest version is 1.0.9.7
    many issue fixes including material trader issue as well as the mission completed problem Wasp0 was talking about

    keep an eye on https://github.com/msarilar/EDEngineer/releases and https://github.com/msarilar/EDEngineer/commits/master ("hotfix" means an update that doesn't warrant release notes nor to be in the releases)
    Yes, thank you for the quick Bug Fix, much appriciated, all working now. Hey do you fancy applying for the FD bug fix team? I hear they have quite a few at the moment and are their usual SLOW response!

  5. #500
    no well you got to keep in mind that my bugfixes are quite simple and straightforward I'm also a single dev on that app so whenever I want to do something I just do it and I don't have to go through any project management, reviews, QA and whatnot (also means that sometimes I can push stuff that doesn't work or simply breaks )

  6. #501
    Originally Posted by CMDR HG View Post (Source)
    no well you got to keep in mind that my bugfixes are quite simple and straightforward I'm also a single dev on that app so whenever I want to do something I just do it and I don't have to go through any project management, reviews, QA and whatnot (also means that sometimes I can push stuff that doesn't work or simply breaks )
    Regardless, you do a damn fine job, with what is IMHO, THE best 3rd party add on for ED. I know FD are under pressure, but they always on every release, take 4 steps forward and 3 backwards, and with this latest 3.0 release we are seeing bugs that appeared in earlier releases, that were fixed, but have re-appeared again.

    Who am I to preach, i know nothing about coding, i just play the game!!

    Anyhows HG, keep up the great work.

  7. #502
    Thx again for the great app and quick fixes/responses!

  8. #503

  9. #504
    There seems to be a bug with the "unlock" items. I am currently showing The Sarge, Ram Tah, Tiana Fortune and Professor Palin as unlocked. Each show percentage complete equivalent to the amount of items I have in my storage.
    Issue is, I have unlocked all the Engineers already, so they really shouldn't appear for me.

    Not a big issue, as you have to tick the box to see them, just thought you'd like to know.

  10. #505
    Thanks very much for updating this. Really useful

  11. #506
    Hi HG. I noticed ED Eng doesn't have the info for the Power Distributor, G4,5 for Weap Focus, Eng Focus, Sys Focus. If you could add them that would be great.

    Screenshots with info:






  12. #507
    Thanks for the info!
    Feel free to update the blueprints file I curated for the application : https://github.com/msarilar/EDEngine...lueprints.json
    You'll see that it's a simple array of objects separated by commas, and they're pretty straightforward:

    Code:
      {
        "Type": "Plasma Accelerator",
        "Name": "Short Range Blaster",
        "Engineers": [
          "Zacariah Nemo",
          "Bill Turner"
        ],
        "Ingredients": [
          {
            "Name": "Modified Consumer Firmware",
            "Size": 1
          },
          {
            "Name": "Nickel",
            "Size": 1
          },
          {
            "Name": "Insulating Membrane",
            "Size": 1
          }
        ],
        "Grade": 2
      }
    You just have to be careful with the names (ingredients, type, engineers) and use the exact same as other blueprints (same casing, no dashes etc..)

  13. #508
    any1 else have problems installing the app?

    it says:
    An error occurred trying to download 'https://raw.githubusercontent.com/msarilar/EDEngineer/master/EDEngineer/releases/EDEngineer.application'.

    See the setup log file located at 'C:\Users\HUD\AppData\Local\Temp\VSD7034.tmp\install.log' for more information.
    the install.log file says:
    The following properties have been setroperty: [AdminUser] = true {boolean}
    Property: [InstallMode] = HomeSite {string}
    Property: [NTProductType] = 1 {int}
    Property: [ProcessorArchitecture] = AMD64 {string}
    Property: [VersionNT] = 6.1.1 {version}
    Running checks for package 'Microsoft .NET Framework 4.6 (x86 and x64)', phase BuildList
    Reading value 'Release' of registry key 'HKLM\Software\Microsoft\NET Framework Setup\NDP\v4\Full'
    Read integer value 461310
    Setting value '461310 {int}' for property 'DotNet46Full_Release'
    Reading value 'v4' of registry key 'HKLM\SOFTWARE\Microsoft\NET Framework Setup\OS Integration'
    Unable to read registry value
    Not setting value for property 'DotNet46Full_OSIntegrated'
    The following properties have been set for package 'Microsoft .NET Framework 4.6 (x86 and x64)':
    Property: [DotNet46Full_Release] = 461310 {int}
    Running checks for command 'DotNetFX46\NDP46-KB3045557-x86-x64-AllOS-ENU.exe'
    Result of running operator 'ValueEqualTo' on property 'InstallMode' and value 'HomeSite': true
    Result of checks for command 'DotNetFX46\NDP46-KB3045557-x86-x64-AllOS-ENU.exe' is 'Bypass'
    Running checks for command 'DotNetFX46\NDP46-KB3045557-x86-x64-AllOS-ENU.exe'
    Result of running operator 'ValueEqualTo' on property 'InstallMode' and value 'HomeSite': true
    Result of checks for command 'DotNetFX46\NDP46-KB3045557-x86-x64-AllOS-ENU.exe' is 'Bypass'
    Running checks for command 'DotNetFX46\NDP46-KB3045560-Web.exe'
    Result of running operator 'ValueNotEqualTo' on property 'InstallMode' and value 'HomeSite': false
    Result of running operator 'ValueGreaterThanEqualTo' on property 'DotNet46Full_Release' and value '393297': true
    Result of checks for command 'DotNetFX46\NDP46-KB3045560-Web.exe' is 'Bypass'
    Running checks for command 'DotNetFX46\NDP46-KB3045560-Web.exe'
    Result of running operator 'ValueNotEqualTo' on property 'InstallMode' and value 'HomeSite': false
    Result of running operator 'ValueGreaterThanEqualTo' on property 'DotNet46Full_Release' and value '393297': true
    Result of checks for command 'DotNetFX46\NDP46-KB3045560-Web.exe' is 'Bypass'
    'Microsoft .NET Framework 4.6 (x86 and x64)' RunCheck result: No Install Needed
    Launching Application.
    URLDownloadToCacheFile failed with HRESULT '-2146697208'
    Error: An error occurred trying to download 'https://raw.githubusercontent.com/msarilar/EDEngineer/master/EDEngineer/releases/EDEngineer.application'.


    edit: I've checked also the firewall settings and even tried installing it with firewall disabled - still the same

  14. #509
    did you try the few steps described here ? https://github.com/msarilar/EDEngine...hooting-Issues
    another user had issues because he didn't have the correct .NET framework (even though it should have installed alongside EDEngineer), so make sure you have it (you can install the latest here : https://www.microsoft.com/net/downlo...-runtime/net47)

  15. #510
    Thanks for the recent updates