Page 1 of 10 1234 ... LastLast
Results 1 to 15 of 146

Thread: Voice Attack profile sharing.

  1. #1

    Voice Attack profile sharing.

    Update: 05/05/16 v0.29

    First off I like to thank Dizzy B High for his Tutorials PDFs. it really help out a lot with learning condition. You find the link to his page below.

    http://forums.frontier.co.uk/showthr...2%23post796892



    I have updated my voiceattack profile for Elite Dnagerous 2.X. Changed the voice command Missions to Transactions. Also cleaned up my profile to hopefully making it easy for anyone that is not that good with programming their voiceattack. I broke up all the command in categories.

    My goal is to make this profile as much user friendly as possibility as it can get. Also ways to make it fail safe as much too.

    Goals and Known Issues:

    Goals:
    -More commands
    -Tutorial Command along with keybinding check list.
    -Tutorial on changing keybinding in the voice attack profile

    Known Issues:
    -Clicking the exit button on the galaxy map sends you to the navigation tab. causing a condition problem. workaround just say the close command when your done in the galaxy map.


    Looking for Youtuber's that want to do a demo of this profile. I would love to add to this post.





    Categories:
    0) Profile Reset: A reset command for all values that the conditions use
    1) Keybinding/Keybinding Macro/Keybinding - Input: All commands in this category are just keybindings safe to change to your keybinding layout.
    2) Non-Voice Command: Mostly conditions commands use in the voice commands. can also be voiced if you wish to.
    3) Voice Commands: All the commands you can speak.
    4) Timer: Count down timers.
    5) Macros: Macros

    Voice Commands

    View Engineers: Opens the engineers panel. NEW

    Cargo Transfer: Transfer SRV Cargo to Ship.

    Board Ship/Deploy SRV: Command for boarding your ship aand deploying your SRV.

    Dismiss Ship/Recall Ship: Command for Dismissing and realling your ship well in your SRV.

    Switch to Turret/Switch to Cockpit: Command for switching between your Turret and cockpit on your SRV.

    Sensors: Opens Sensors Panel.

    Drive Assist: Toggles drive assist for the SRV.

    Toggle Orbit Lines: Toggle for orbit lines.

    Activate Camera Drone/Deactivate Camera Drone: Voice Command Using the Debug View Mode.

    Say Any Communication tab: Opens any Communication tabs by say Communication, Groups, Messages, Notification, or Options.

    Nav Lock Route: Locks next system in route.

    Engage Next System: Locks next system in route and engages he fameshift drive
    .
    Wing: Command prefix for Wingman. Suffix Commands are One, Two, Three, One Target, Two Target, Three Target, One Nav-Lock, Two Nav-Lock, and Three Nav-Lock (Ex. "Wing One Target")

    System Map: Opens the System Map fro the navigation panel.

    Full Ahead: Set speed to 100%

    Half Ahead: Set speed to 75%

    Slow Ahead: Set speed to 50%

    Dead Slow Ahead: Set speed to 25%

    All Stop: Set speed to 0%

    Dead Slow Astern: Set speed to -25%

    Slow Astern: Set speed to -50%

    Half Astern: Set speed to -75%

    Full Astern: Set speed to -100%

    Deploy Hardpoints; Retract Hardpoints: Command for hardpoints toggle.

    Full Power To: Command prefix for full power distribution. Suffix Commands are Engines, Systems, Weapons, and Reset. (Ex. "Full Power To Engines")

    Interdiction: Command to use set all panels, comms, and galaxy map to closed value when being interdicted well you had one of the panels open.

    Hazard Lights: Command that causes you lights to strobe for a sort time. Use to warm other player if you feel that they my run into you.

    Next Subsytem; Previous Subsystem: Toggle for cycling sub targets.

    Lights: Toggle for the ship lights.

    Engage Frameshift; disengage Frameshift: Toggle command for your Frameshift. For hyper jump to another system. It will also check if your cargo scoop, landing gear is deployed and retract them before jumping.

    Engage Supercruise; disengage Supercruise: Toggle command for Supercruise. For in system supercruise. It will also check if your cargo scoop, landing gear is deployed and retract them before jumping.

    Power To: Command prefix for power distribution. Suffix Commands are Engines, Systems, Weapons, and Reset. (Ex. "Power To Engines")

    Tutorial: The starts of a tutorial command. Not finished yet WIP.

    Wrong Tab: Command for quick calibration of the current panel that is open.

    Cancel: Cancel Command for the full reset and calibrate panel. in case of any surprises well doing the calibration.

    Yes/No: Cammand use for answering VoiceAttack's Questions

    Calibrate Panels: Command you can use if one of your tabs is out of sync. It will ask for the tab name. just speak the tab name your panel is on.

    Vocal Response: toggle for tab name vocalization

    Full Reset: Command to reset your profile. mostly used if you disconnect or restart your client.

    Close; Close Panel; Exit Panel: Will Close the left and right panels, galaxy map, and comms.

    Retract Scoop; Close Scoop/Deploy Scoop; Open Scoop: Will open or close your Cargo Scoop.

    Head Look; Free Look: Toggle your Head look

    Deploy Gear; Gear Down/Retract Gear; Gear Up: Will deploy or Retract landing gear.

    Time; what time is it; tell me the time: Will tell you the time on your local computer.

    Enable Flight Assist/Disable Flight Assist: Flight assist.

    Galaxy Map: Galaxy map toggle.

    Request Dock: Very fast docking request.

    Any Panel Tab Name: Will open any said panel tab. (Ex. "Navigation or Status")

    Are You Online: Check if VoiceAttack is listening.

    Well that's all I have done so far. Will continue adding more to the profile as I go. My profile link is down below if you want to check it out and if you run into any bugs or want me to add something to it let me know.

    Keybinding For Noobs:


    I have setup the profile for easy keybinding editing. All the keybinding are categorized under 1) Keybinding

    Attachment 4492

    For example Cargo scoop is set to "home" key and you have it set to another key. right click the cargo scoop command and click edit.

    Attachment 4495

    Now right click "Press home key..." and edit.

    Attachment 4496

    In this window just press the key you have bound for cargo scoop and click ok. Easy like that. :)

    Attachment 5023

    Also under the category 1)Keybinding - Input Key. the keybinding are a bit different you have to edit the part. "When I press keys: / When I press button:" to change your keybinding you have for your set up.

    Change Log:

    v0.29 05/05/16
    -added: tobii eyex hotkey and value to torn is off if you do not have tobii eyex
    -keybinding: tobii eyex toggle.
    -added: view engineer voice command.
    -tweaked: system map, galaxy map, and view engineers to turn off eye tracking with tobii eyex until these panels are closed.




    v0.28 12/18/15
    -tweak: broke up the dismiss ship and recall ship and add the landing gear values into the command.
    -tweak: board ship, deploy SRV to reset values for power distribution
    -tweak: the crafting menu not to detect tab right or left that was confusing the right panel tab values.

    v0.27 12/08/15
    -fixed: broad ship, recall ship, and dismiss ship command for the added new menu.
    -renamed: Cargo to Inventory to match right panel changes
    -added: keybinding input for crafting
    -tweaked: inventory close panel well in crafting menu

    v0.26 12/03/15
    -added: board ship/deploy SRV command
    -added: dismiss and recall ship command
    -added: switch to turret or cockpit command for the SRV
    -added: Toggle SRV Turret keybinding

    v0.25 12/03/15
    -added: sensors keybinding and command
    -added: drive assist keybinding and command
    -added: orbit lines keybinding and command
    -removed: already deployed/retracted reply from cargo scoop, landing gear, and hardpoints
    -new link: for horizons base profile. https://www.dropbox.com/s/37nss86d6d...ofile.vap?dl=0

    v0.24 09/11/15
    -added: Keybinding for Debug View mode.
    -tweaked: Comm panel tab switching speed tiny bit slower so the chat box does not stick to the HUD

    v0.23 06/05/15
    -added: Notification tab voice command in the comms panel

    v0.22 05/02/15
    -removed: system map and docking macro keybindings
    -renamed: keybindings to match the in-game keybindings
    -added: target next system in route keybinding list
    -added: UI navigation keybindings to keybinding list
    -moved: macros to category 5) Macros

    v0.21 05/01/15
    -fixed: Fix the communication panel handling
    -new: Keybinding for UI Back
    -new: Keybinding for enable the frameshift drive.
    -tweeked: all menus are closed by UI Back
    -added: menu system for the communication panel.

    v0.20 04/15/15
    -tweaked: more work with panel tab handling. hopefully less chance of tabs going out of sync.

    v0.19 04/14/15
    -added: Wing voice commands.

    v0.18 04/12/15
    -tweeked: clean and did some tweeking with panel navigation
    -fix: comms workaround. make sure AUTO FOCUS ON TEXT INPUT FIELD is set to off in your controls options
    -change: system updated to the new keybinding

    v0.17 12/25/14
    -fix: fix the missing 5 timer for calibrate panels

    v0.16 12/23/14
    -added: Keybinding macro for system map.
    -added: voice command for system map.

    v0.15 12/23/14
    -added: keybindings for set speed to.
    -added: basic voice commands to set your speed. No vocal response yet.

    v0.14 12/17/14
    -fix: fix wrong tab timer not conunting down before auto canceling the command.
    -fix: more code clean up that I missed.
    -added: joystick input for tab navigation. 1)keybindings - input
    -added: added voice command toggle input for enabling and disabling voice listening. 1)keybindings - input

    v0.13 12/15/14
    -added: hardpoint command
    -added: joystick input command under 1)keybinding - Input Key. for setting the state of hardpoint in values.
    -fix: code clean up on say commands, as now they can be set to wait until complete and I can remove all the pauses i add between says.
    -Voice Attack: many need to update voice attack to the latest 1.5.7

    v0.12 12/13/14
    -added: Full Power to command for power distribution

    v0.11 12/12/14
    -added: Interdiction command for panel reset when being interdicted.
    -added: hazard lights command to strobe your light for a sort timeframe.

    v0.10 12/08/14
    -added: added sub target keybindings and voice commands.
    -added: lights keybinding and voice command.

    v0.9 11/27/14
    -changes: made changes to the Frameshift command to the new separated keybindings for supercruise and frameshift jump

    v0.8 11/06/14
    -fix: Typo
    -added: Basic power distribution commands

    v0.7 11/06/14
    -added: New keybinding command for tab values and navigating left and right tabs.

    v0.6 11/05/14
    -added: Added the starting of a tutorial. Unfinished, but the basic Idea. the command maybe still unstable.

    v0.5 11/02/14
    -added: Wrong Tab command for a quick panel calibration for the current panel that is open

    v0.4 11/02/14
    -added: cancel command for a quick escape out of the calibration commands
    -tweaked: put most of the conditions name and value in a it's own command

    v0.3 11/01/14
    -fix: add more conditon names to not confuse landing gear value.
    -added: add the panel calibration into the full reset.

    .v0.2 10/31/14
    -fix: wrong used condition name used for calibrate panels.

    v0.1 10/31/14
    -fix: full reset command will ask you if your landing gear is deployed simple yes and no will set the landing gear value
    -added: calibrate panels profile command if any panel tab become out of sync
    -added: vocal response command to toggle some of the vocal responses.
    Profile Download:
    https://www.dropbox.com/s/37nss86d6d...ofile.vap?dl=0 Elite Dangerous 1.X/2.X

    Backup Download link:
    https://1drv.ms/u/s!AnnZQABsDSCCiDZ5Dt7fIOYAOZHz Elite Dangerous 1.X/2.X
    https://1drv.ms/u/s!AnnZQABsDSCCiD7hN1avUV8KiU-K Elite Dangerous WIP Beta 2.2

  2. #2

    Thumbs up Proflid Download help

    Hi guys

    Some people are having problems when downloading your profile!

    Ok guys when you download the file and save it, in the file name before you save it change the xml to vap that sorts it as if you save or have saved it change the file extension to vap under folder options in control panel.

    Hop this helps guys

  3. #3
    Originally Posted by Bigyin View Post (Source)
    Hi guys

    Some people are having problems when downloading your profile!

    Ok guys when you download the file and save it, in the file name before you save it change the xml to vap that sorts it as if you save or have saved it change the file extension to vap under folder options in control panel.

    Hop this helps guys
    I didn't know people are having problems download the file. first time using dropbox myself, but when I test the download it gave me the as the vap file format.

  4. #4
    Update and fixes

    v0.2 10/31/14
    -fix wrong used condition name used for calibrate panels.

    v0.1 10/31/14
    -fix: full reset command will ask you if your landing gear is deployed simple yes and no will set the landing gear value
    -added: calibrate panels profile command if any panel tab become out of sync
    -added: vocal response command to toggle some of the vocal responses.

    {{You Can Download My VoiceAttack Profile From Here}}=={{I'm not much of an youtuber, but there's vids. Here}}=={{Video Flight Log. Here}}

  5. #5
    v0.3 11/01/14
    -fix: add more conditon names to not confuse landing gear value.
    -added: add the panel calibration into the full reset.

    {{You Can Download My VoiceAttack Profile From Here}}=={{I'm not much of an youtuber, but there's vids. Here}}=={{Video Flight Log. Here}}

  6. #6
    v0.4 11/02/14
    -added: cancel command for a quick escape out of the calibration commands
    -tweaked: put most of the conditions name and value in a it's own command


    If any combat players that are using this profile. I would love some input about adding combat items to voiceattack profile. Since I have not did enough combat to think what can be needed.

    {{You Can Download My VoiceAttack Profile From Here}}=={{I'm not much of an youtuber, but there's vids. Here}}=={{Video Flight Log. Here}}

  7. #7
    Going to try to get tutorial command done this week along with keybinding check list. Hopefully when IRL work gives me some time.

    {{You Can Download My VoiceAttack Profile From Here}}=={{I'm not much of an youtuber, but there's vids. Here}}=={{Video Flight Log. Here}}

  8. #8
    Thanks for the hard work! Looking to get started with VoiceAttack and this looks great.

  9. #9
    Not sure if it was something I did or not, but I'm having issues with the galaxy map messing up the condition values of the panels (doesn't know if they are opened or closed for example).

    I also slowed down the timing of the pause for tabbing (from .01 to .05). Twice it went so fast that it hit the wrong tap. Instead of requesting a dock, it abandon my quest.

    But have to admit that this is a ton of work and is appreciated. Thanks!

  10. #10
    Originally Posted by Foebik View Post (Source)
    Not sure if it was something I did or not, but I'm having issues with the galaxy map messing up the condition values of the panels (doesn't know if they are opened or closed for example).

    I also slowed down the timing of the pause for tabbing (from .01 to .05). Twice it went so fast that it hit the wrong tap. Instead of requesting a dock, it abandon my quest.

    But have to admit that this is a ton of work and is appreciated. Thanks!
    you can just say "Full Reset" and fallow the steps and it should fix it self. Also the pause are needed at .05 or higher. The game can seem to keep up if it's below .05
    if the condition continue to mess up I will look into it.

    Added to Known Issue: Clicking the exit button on the galaxy map sends you to the navigation tab. causing a condition problem. workaround just say the close command when your done in the galaxy map.

    Thank you for you imput.

    {{You Can Download My VoiceAttack Profile From Here}}=={{I'm not much of an youtuber, but there's vids. Here}}=={{Video Flight Log. Here}}

  11. #11
    Added the base starting of a tutorial command. It's still WIP, unfinished. Maybe unstable at time, but it the basics of a idea I'm still working on. There is alot of condition, timings, and stuff I have to still add to complete this command.

    {{You Can Download My VoiceAttack Profile From Here}}=={{I'm not much of an youtuber, but there's vids. Here}}=={{Video Flight Log. Here}}

  12. #12
    Originally Posted by ishmair View Post (Source)
    you can just say "Full Reset" and fallow the steps and it should fix it self. Also the pause are needed at .05 or higher. The game can seem to keep up if it's below .05
    if the condition continue to mess up I will look into it.
    It may just be that my system doesn't respond as fast as yours does. But the manual change doesn't make it feel that much different and I haven't had issues since the change.

    One other thing that I didn't mention because I thought it might have been an issue on my side some how and I wanted to check first. When I enable/disable flight assist, the conditional values for me asking for the same thing twice in a row seems to work (example enable x2 in a row) and gives me the error that it is already in that state. My issue is if I use either of the commands the game says its disabling followed right after with it saying enabling. I did some testing in notepad and it is only showing the one key press. So it must be something on my side that I'm not understanding. If I figure that out maybe it will be the same root cause as why the tabbing isn't working right for me. Ill keep digging.

    Thanks again

  13. #13
    Originally Posted by Foebik View Post (Source)
    It may just be that my system doesn't respond as fast as yours does. But the manual change doesn't make it feel that much different and I haven't had issues since the change.

    One other thing that I didn't mention because I thought it might have been an issue on my side some how and I wanted to check first. When I enable/disable flight assist, the conditional values for me asking for the same thing twice in a row seems to work (example enable x2 in a row) and gives me the error that it is already in that state. My issue is if I use either of the commands the game says its disabling followed right after with it saying enabling. I did some testing in notepad and it is only showing the one key press. So it must be something on my side that I'm not understanding. If I figure that out maybe it will be the same root cause as why the tabbing isn't working right for me. Ill keep digging.

    Thanks again
    Is your flight assist keybinding in the game set on hold or toggle. If it's on hold mode switch it to toggle. I forgot that flight assist had to mode in there game options.

    {{You Can Download My VoiceAttack Profile From Here}}=={{I'm not much of an youtuber, but there's vids. Here}}=={{Video Flight Log. Here}}

  14. #14
    ishmair,
    Its nice work on the profile, the problem with sharing them in Elite is no standard keyboard bindings.
    If you could include what your bindings are we could set ours alike and the profile works other wise we have to go in and change your profile to our bindings and it gets messed up.

  15. #15
    Originally Posted by Patriktx View Post (Source)
    ishmair,
    Its nice work on the profile, the problem with sharing them in Elite is no standard keyboard bindings.
    If you could include what your bindings are we could set ours alike and the profile works other wise we have to go in and change your profile to our bindings and it gets messed up.
    Hey I might be able to help with this. He is using 'best practices' and made key bindings in his profile. Just sort the columns so you see all the "1) Key bindings" grouped together and just adjust them as needed. These are like variables that his other conditions call upon. So you only have to make the change in one place and not 100 different place in the profile.

    And I figure out my tab timing profile issue. Well there isnt one . Out of habbit I sometime switch the tabs manually. And of course the profile doesnt know I did this. So it assumes its on the right tab requesting a dock. But since I manually moved over one tab just before it instead abandons one of my quests. Opps.

    Would it be possible to have it watch for manual changes as well as verbal requests for tabbing? Make another key binding spot that I can specify my manual keys for tabbing?

Page 1 of 10 1234 ... LastLast