65000 Ly from Sol Club, thread the fourth

CMDRDateDistanceOther Notes
Reise Lang2-May-330565271.73DW2, Krait Phantom

Forgot to take a pic at Beagle Point last week. Heading to Semotus Beacon currently. Screenshot from current location.

Ceeckaea XW-L c24-0 (20190506-140352) (2).jpg
 
CMDRDateDistanceOther Notes
OldManKnott6th May 330565649lyBeluga Liner with 47ly jump range

After reaching Beagle Point on DWII I went for a look at Ishums Reach and decided to supercruise out for a couple of light years just to make a nice big number.

 
Tried to post and join the club a couple of days back, but no joy - I probably screwed something up.

Trying again.
Got to Beagle Point with DW2, went on to Semotus Beacon, then back to B-point. Now slowly travelling homeward - see you in 6 months bubble.

CMDR name: Davri Anders
Date of reaching 65000 ly 28/04/2019 (3305)
Ship Type: Cobra mk4 Ship Name: Tweepadock
Maximum Distance from Sol: 65647Ly



 
CMDRDateDistanceOther Notes
GlowyHedgehog06 May 330565279.35DW2, Asp Explorer
CMDRDateDistanceOther Notes
Teewar06 May 330565647,34DW2, Asp Explorer, D0W-DW
CMDRDateDistanceOther Notes
Becquerelle7 May 330565279.35DW2, Kitchen Sink, Anaconda, 2NY-DW
CMDRDateDistanceOther Notes
Rixxan24 April 330565279.35lyDW2, 3T7-DW, Anubis -Seal Team Fix, Anaconda
CMDRDateDistanceOther Notes
vipeFIN7 May 330565279.35lyDW2, Krait Phantom
CMDRDateDistanceOther Notes
Shaz Dingo7-May-330565,647.34[DW2], Anaconda
o7 Cmdrs.

Tried to post and join the club a couple of days back, but no joy - I probably screwed something up.
If the forums didn't eat it I must've missed you round a page break or something. Sorry.

CMDRDateDistanceOther Notes
OldManKnott6th May 330565649lyBeluga Liner with 47ly jump range
Unfortunately we don't do updates or second entries so your first entry (#739, 30-Apr-3304) at Beagle stands.

CMDRDateDistanceOther Notes
Lysianassa7-May-330565279.35Mamba, 18.4ly base jump range
A glutton for punishment ;)

o7 for doing it with close to minimum range.
 
So I have a UI problem. I Flew out from OEVASY SG-Y DO B 9 F. Straight shot with SOL in the rear view mirror. I'm running down to the wire for the return jump now. My target on SOL shows 65,650 onscreen but when I look at the Galmap it has remained at 65,47.34 and will not update no matter what I do.

On top of that, the new UI doesn't even show SOL in the target list panel at all. I'd like credit for the extra LYs and effort to get out this far but my screens don't match.

Any ideas why? TYIA
 
So I have a UI problem. I Flew out from OEVASY SG-Y DO B 9 F. Straight shot with SOL in the rear view mirror. I'm running down to the wire for the return jump now. My target on SOL shows 65,650 onscreen but when I look at the Galmap it has remained at 65,47.34 and will not update no matter what I do.

On top of that, the new UI doesn't even show SOL in the target list panel at all. I'd like credit for the extra LYs and effort to get out this far but my screens don't match.

Any ideas why? TYIA
Correct - the GalMap ALWAYS shows the "entry star to entry star" distance - never the extra distance gained in SC...

In the GalMap - search for 'Sol' - when it becomes centered - then 'Select' it (yellow diamond above it) - then return to HUD and you should then see the distances to the 'local' system > 1 LY - so you can add the "local distance" (seen in Left pane / target panel) to the "OEVASY SG-Y DO to Sol Distance" [unchanging 65,647.34 LY] to get your "net distance":

Here's mine (still need to submit I just realized!):


o7

Dan

PS - even though I didn't run my fuel down - I did plot the nearest start (@ 50 LY IIRC) - and saw how much fuel was needed to make the jump...Then make sure when your hourly consumption nibbles at your fuel total - that you don't go too low....

Worst case - I think you can also "cut it really close" if you do a FSD injection synthesis: then the amount of fuel used to make the jump is reduced - so you can really stretch it (I didn't have the patience - just did @ 1 LY extra)
 
Last edited:
CMDRDateDistanceOther Notes
Dajoji7-May-201965,650.48Anaconda "Agile Badger", [DW2 Fuel Rat and Hull Seal] Engineered with Guardian FSD.

I have no idea why the galmap won't update. I have tried everything. The correct distance shows up everywhere else in the HUD. Hopefully it's enough.
 

Attachments

I think that's enough - the left panel - and the GalMap....BTW - I also tried looking at the Orrey View - I took a screen as well...my position indicator was waaaaay off - and that at @ 1 LY - congrats!
 
CMDRDateDistanceOther Notes
Dajoji7-May-201965,650.48Anaconda "Agile Badger", [DW2 Fuel Rat and Hull Seal] Engineered with Guardian FSD.

I have no idea why the galmap won't update.
The galmap won't update, it's fine. Welcome to the club Cmdr.
 
Top Bottom