I submitted this on the issue tracker, but I wanted to see if anyone else has this problem.
( https://issues.frontierstore.net/issue-detail/62950 )
I'll save you guys a click and just copy-paste the problem here:
The "metal climbing frame beam," and "metal climbing frame curve"(s) are almost impossible to place down sometimes. It will say "obstructed" in places that don't make sense for them to be so. The "metal climbing frame ramp" and "metal climbing frame extension" however, can be placed almost anywhere (water, on paths, through fences) and will work great. Animals can use them without glitching or any other problems.
Another difference between these pieces is that the "metal climbing frame beam" will reset to its default colour when I reload my save file. I always change it to match the rest of my pieces, but it has always changed back the next time I play. I'm not sure if any other climbing frame pieces have this problem. I know "metal climbing frame ramp" does not.
The "ramp" is on the right, which is working fine and has kept the colour I gave it, and the "beam" on the left has reset to its default bright yellow colour and is giving me placement problems. For example if I delete the beam it cannot be placed back down there again. It's very confusing as to why. Try placing beams or curves near paths or habitat walls so guests can see the animals clearly, and you will likely have problems. You also cannot place them over water so animals can use them to reach islands. I would like the beam and curve pieces to work as easily as the ramp and extension pieces. I believe the restrictions on the beam and curves are stifling creativity and are too confusing.
( https://issues.frontierstore.net/issue-detail/62950 )
I'll save you guys a click and just copy-paste the problem here:
The "metal climbing frame beam," and "metal climbing frame curve"(s) are almost impossible to place down sometimes. It will say "obstructed" in places that don't make sense for them to be so. The "metal climbing frame ramp" and "metal climbing frame extension" however, can be placed almost anywhere (water, on paths, through fences) and will work great. Animals can use them without glitching or any other problems.
Another difference between these pieces is that the "metal climbing frame beam" will reset to its default colour when I reload my save file. I always change it to match the rest of my pieces, but it has always changed back the next time I play. I'm not sure if any other climbing frame pieces have this problem. I know "metal climbing frame ramp" does not.
The "ramp" is on the right, which is working fine and has kept the colour I gave it, and the "beam" on the left has reset to its default bright yellow colour and is giving me placement problems. For example if I delete the beam it cannot be placed back down there again. It's very confusing as to why. Try placing beams or curves near paths or habitat walls so guests can see the animals clearly, and you will likely have problems. You also cannot place them over water so animals can use them to reach islands. I would like the beam and curve pieces to work as easily as the ramp and extension pieces. I believe the restrictions on the beam and curves are stifling creativity and are too confusing.