Why is generated heat tied to frame rate instead of time?
Try using the supercruise boost at 30fps cap then try at 120 fps cap. The difference is massive.
My Cutter done 35,000ls before overheating at 30fsp
It overheated within 3-4 seconds and done under 5,000ls at 120fps.
Try using the supercruise boost at 30fps cap then try at 120 fps cap. The difference is massive.
My Cutter done 35,000ls before overheating at 30fsp
It overheated within 3-4 seconds and done under 5,000ls at 120fps.