That must be an issue on your side. Did you get any error message?
That must be an issue on your side. Did you get any error message?
I did check that they were saved in EliteOCR. I manually scanned files with EliteOCR and it seemed to be reading everything properly.
When I open TCE 1.2.6, again a fresh install/fresh database, I enter in the New Market for where I happen to be (Eta Apodis/Ashman Station), then click Commodity. When I click View, it shows all commodities as it should, including the new ones. When I click Scan Prices >> Starty OCR Scan, the view reverts to the Compact list without the new commodities. However, when I try to mouse-wheel scroll down the list, it goes temporarily blank and shows the new commodities once again. When I then try to click any of them to manually enter/edit the scanned values, it reverts back to the screen without the new commodities.
If it would be helpful I can try to make a cell-phone video recording of what is happening, since none of my video recorders pick up TCE overlay when recording ED.
I'm EXTREMELY thankful for your assistance in trying to get this all working again! I will do anything you can think of to help provide the information you need to either fix this on your end (if necessary) or direct me in how to do this properly.
Edit: Just to cover all the bases, I am running both TCE, EliteOCR from their own drive/directories and all worked perfectly previously. They are both also set to run as Admin.
Last edited:
Bug-like report
Code:
************** Exception Text **************
System.IndexOutOfRangeException: Index was outside the bounds of the array.
at System.Array.InternalGetReference(Void* elemRef, Int32 rank, Int32* pIndices)
at System.Array.GetValue(Int32 index1, Int32 index2)
at Microsoft.VisualBasic.CompilerServices.Symbols.Container.GetArrayValue(Object[] Indices)
at Microsoft.VisualBasic.CompilerServices.NewLateBinding.InternalLateIndexGet(Object Instance, Object[] Arguments, String[] ArgumentNames, Boolean ReportErrors, ResolutionFailure& Failure, Boolean[] CopyBack)
at Microsoft.VisualBasic.CompilerServices.NewLateBinding.ObjectLateInvokeDefault(Object Instance, Object[] Arguments, String[] ArgumentNames, Boolean ReportErrors, Boolean[] CopyBack)
at Microsoft.VisualBasic.CompilerServices.NewLateBinding.InternalLateInvokeDefault(Object Instance, Object[] Arguments, String[] ArgumentNames, Boolean ReportErrors, Boolean[] CopyBack)
at Trade_Computer_Extension.MD_Upgrade.Upgrade_Check() in C:\Users\Hellfire\Documents\Visual Studio 2010\Projects\Trade Computer Extension\Trade Computer Extension\MD_Upgrade.vb:line 25
at Trade_Computer_Extension.Panel_Loader.Panel_Loader_VisibleChanged(Object sender, EventArgs e) in C:\Users\Hellfire\Documents\Visual Studio 2010\Projects\Trade Computer Extension\Trade Computer Extension\Panel_Loader.vb:line 46
at System.Windows.Forms.Control.OnVisibleChanged(EventArgs e)
at System.Windows.Forms.ScrollableControl.OnVisibleChanged(EventArgs e)
at System.Windows.Forms.Form.OnVisibleChanged(EventArgs e)
at System.Windows.Forms.Control.WmShowWindow(Message& m)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.Form.WmShowWindow(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
************** Loaded Assemblies **************
mscorlib
Assembly Version: 4.0.0.0
Win32 Version: 4.6.1080.0 built by: NETFXREL3STAGE
CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/mscorlib.dll
----------------------------------------
Trade Computer Extension MK.II
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/TCE/Trade%20Computer%20Extension%20MK.II.exe
----------------------------------------
Microsoft.VisualBasic
Assembly Version: 10.0.0.0
Win32 Version: 14.6.1038.0 built by: NETFXREL2
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/Microsoft.VisualBasic/v4.0_10.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualBasic.dll
----------------------------------------
System
Assembly Version: 4.0.0.0
Win32 Version: 4.6.1081.0 built by: NETFXREL3STAGE
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Core
Assembly Version: 4.0.0.0
Win32 Version: 4.6.1038.0 built by: NETFXREL2
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Core/v4.0_4.0.0.0__b77a5c561934e089/System.Core.dll
----------------------------------------
System.Windows.Forms
Assembly Version: 4.0.0.0
Win32 Version: 4.6.1038.0 built by: NETFXREL2
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System.Drawing
Assembly Version: 4.0.0.0
Win32 Version: 4.6.1078.0 built by: NETFXREL3STAGE
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
System.Runtime.Remoting
Assembly Version: 4.0.0.0
Win32 Version: 4.6.1038.0 built by: NETFXREL2
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Runtime.Remoting/v4.0_4.0.0.0__b77a5c561934e089/System.Runtime.Remoting.dll
----------------------------------------
System.Configuration
Assembly Version: 4.0.0.0
Win32 Version: 4.6.1038.0 built by: NETFXREL2
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Configuration/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
----------------------------------------
System.Xml
Assembly Version: 4.0.0.0
Win32 Version: 4.6.1064.2 built by: NETFXREL3STAGE
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
System.Data.SQLite
Assembly Version: 1.0.99.0
Win32 Version: 1.0.99.0
CodeBase: file:///C:/TCE/System.Data.SQLite.DLL
----------------------------------------
System.Data
Assembly Version: 4.0.0.0
Win32 Version: 4.6.1038.0 built by: NETFXREL2
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_32/System.Data/v4.0_4.0.0.0__b77a5c561934e089/System.Data.dll
----------------------------------------
System.Transactions
Assembly Version: 4.0.0.0
Win32 Version: 4.6.1080.0 built by: NETFXREL3STAGE
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_32/System.Transactions/v4.0_4.0.0.0__b77a5c561934e089/System.Transactions.dll
----------------------------------------
System.EnterpriseServices
Assembly Version: 4.0.0.0
Win32 Version: 4.6.1038.0 built by: NETFXREL2
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_32/System.EnterpriseServices/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.EnterpriseServices.dll
----------------------------------------
************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>Please make a fresh install of the V1.2.6 version and update then to V1.2.7. Your old database is not compatible with the new version. Please import your old database with the new version to make it compatible.
Don't copy your old database over your actual version. See FAQs, what to do, when a new full version is released.
Thanks for your report. Of course, the mousewheel scrolling should be disabled with the SCAN PRICES tab. It will be fixed with the next update (tomorrow). Please don't use it after scanning, until it is fixed.
Last edited:
Sadly Frontier neglected to coordinate the Horizons release date with my holiday plans
.I'll update EDMC on Friday.
Sadly Frontier neglected to coordinate the Horizons release date with my holiday plans
I'll update EDMC on Friday.
Heh. Good work looking forward to it. Big love all round.
Eventure - my issue was fixed with a new install - thx again!
I will bug report it.Sadly Frontier neglected to coordinate the Horizons release date with my holiday plans
Update (1.2.8) released:
Changelog:
- Fixed an issue in using the mousewheel when scanning commodities with OCR.
- Fixed two small display issues at the Waypoints panel.
Note:
Copy the content into your TCE folder to update your version.
- Full-Version 1.2.6 installer: http://bit.ly/1NSmn6J
- Update 1.2.8: http://bit.ly/25r20SM (Full-Version 1.2.6 required)
Changelog:
- Fixed an issue in using the mousewheel when scanning commodities with OCR.
- Fixed two small display issues at the Waypoints panel.
Note:
Copy the content into your TCE folder to update your version.
Last edited:
Thank you for your efforts, Eventure!
All seems to be working correctly now, except that my OCR is only ignoring Water. I don't care about that. It is picking up other new materials. Was able to re-import my original database and go from there. Hooray, now I can travel about with a real picture of where I'm going. Should hit 500 hours with TCE today or tomorrow, and still counting!
All seems to be working correctly now, except that my OCR is only ignoring Water. I don't care about that. It is picking up other new materials. Was able to re-import my original database and go from there. Hooray, now I can travel about with a real picture of where I'm going. Should hit 500 hours with TCE today or tomorrow, and still counting!
Hi Eventure
Using 1.2.8 at the moment and liking the new addition of the Bookmarks/Favouties. The new star checking appears to be working fine, I have been monitoring the adjustments that TCE is making from the netlog co-ordinates.
However I have come up with a few glitches and suggestions.
- The Bookmarks/Favourites distances do not appear to be updating when jumping to different systems. They seem to retain the original values from when TCE first started up.
- When TCE is shown again after being hidden a titleless, blank 'WayPoint Panel' appears. Without having a 'Hide' button the only way to close it is by using a hotkey if one has been defined.
- It would be nice if there was a hotkey for Favourites as well as Bookmarks. I bring the panel up using the hotkey and it would be nice to switch between the two without having to click the relevant button on the panel.
- Some way of sorting the Bookmarks/Favourites would be helpful, both name & distance if that were possible.
- I got the impression from your original post that you were intending to add notes to Bookmarks/Favourites? This would be great or if not possible perhaps the ability to alter the Bookmark/Favourite itself so that it would be more meaningful when scrolling through the list e.g. 'Aiabiko - Home System' or 'LFT 910 - Pristine mining'
Thanks
Last edited:
Hi Eventure
- It would be nice if there was a hotkey for Favourites as well as Bookmarks. I bring the panel up using the hotkey and it would be nice to switch between the two without having to click the relevant button on the panel.
- Some way of sorting the Bookmarks/Favourites would be helpful, both name & distance if that were possible.
- I got the impression from your original post that you were intending to add notes to Bookmarks/Favourites? This would be great or if not possible perhaps the ability to alter the Bookmark/Favourite itself so that it would be more meaningful when scrolling through the list e.g. 'Aiabiko - Home System' or 'LFT 910 - Pristine mining'
Thanks
I second this!
Hi Eventure
Using 1.2.8 at the moment and liking the new addition of the Bookmarks/Favouties. The new star checking appears to be working fine, I have been monitoring the adjustments that TCE is making from the netlog co-ordinates.
However I have come up with a few glitches and suggestions.
- The Bookmarks/Favourites distances do not appear to be updating when jumping to different systems. They seem to retain the original values from when TCE first started up.
- When TCE is shown again after being hidden a titleless, blank 'WayPoint Panel' appears. Without having a 'Hide' button the only way to close it is by using a hotkey if one has been defined.
- It would be nice if there was a hotkey for Favourites as well as Bookmarks. I bring the panel up using the hotkey and it would be nice to switch between the two without having to click the relevant button on the panel.
- Some way of sorting the Bookmarks/Favourites would be helpful, both name & distance if that were possible.
- I got the impression from your original post that you were intending to add notes to Bookmarks/Favourites? This would be great or if not possible perhaps the ability to alter the Bookmark/Favourite itself so that it would be more meaningful when scrolling through the list e.g. 'Aiabiko - Home System' or 'LFT 910 - Pristine mining'
Thanks
Hi Maedhros,
thanks for your report. Bugs are found and fixed for the next version, notes and renaming bookmark requires some changes to the current behavior of the bookmark and favorites tab.
Double-click will no longer set a course, but changing the name. To set a course there is now a small button behind the bookmark/favorite.
The notes of a star system/market/location, if available, is now displayed within a tooltip balloon, when selecting a bookmark/favorite. Sorting by name/distance will be included too.
And, of course, I will add a keybind for the Favorites tab.
Anything else, pal?
Last edited:
Hi Maedhros,
thanks for your report. Bugs are found and fixed for the next version, notes and renaming bookmark requires some changes to the current behavior of the bookmark and favorites tab.
Double-click will no longer set a course, but changing the name. To set a course there is now a small button behind the bookmark/favorite.
The notes of a star system/market/location, if available, is now displayed within a tooltip balloon, when selecting a bookmark/favorite. Sorting by name/distance will be included too.
And, of course, I will add a keybind for the Favorites tab.
Anything else, pal?
Hi Eventure
A prompt response as usual
Looking forward to the update. Can't think of anything else at present but when I do you'll be the first to know
TCE makes a plausibility check of the goods price. It is not within the stored price range, TCE shows you a red cross.
The stored price range is determined by all stored prices of the good (min/max) from all stored markets. You will see the red cross mainly at the start of collecting prices for new goods. So it is only an attention sign, that you should check the values.
If they are fine, don't worry and continue. When more stored prices are available to determine the range, you will see a cross less often.
So it is not an indicator, if a scan is incorrect. It is an indicator, if the values are out of common range.