Engineers Engineering Database And Calculator [Engineers Update]

Qohen Leth

Qohen Leth
Derath said:
I don't really understand what your asking there Qohen, you can hit browse all and see everything they offer - the classes all seem set to me
Click to expand...

No, with 'browse' I only ever seen different classes. Same for the screenshots I've been sent. thought it displayed everything, but i've just been commented other classes, so... If 'browse' was to display everything, there couldn't be different results.

It can be that 'modify your modules' displays currently possible mods according to what modules you have, but that 'browse' displays potential mods, according to your ship's module classes, even though you don't have the module currently fitted. Simplest would be to go and see in 'browse' with a Conda or Cutter or sthg. Which I don't have n_n'
 
Last edited:

Derath

D
Browse has always shown me everything available even if I can't fit it, it shows mods for C4 pulses when i'm in my Asp/Python for example - I tend to shop around with the Asp write the components required down then go mod up the corvette I haven't noticed any inconsistencies so far. I'll start taking screenshots in the corvette though if it helps
 

Qohen Leth

Qohen Leth
Derath said:
Browse has always shown me everything available even if I can't fit it, it shows mods for C4 pulses when i'm in my Asp/Python for example - I tend to shop around with the Asp write the components required down then go mod up the corvette I haven't noticed any inconsistencies so far. I'll start taking screenshots in the corvette though if it helps
Click to expand...

Ok, good to know. That's my thought too, but depending on how people have taken screenshots before sending them to me, we probably have errors on the overview.
 

millstonebarn

millstonebarn
Well done everyone. Much rep to all.

Just picking up on an earlier comment, my understanding is that the plan is for 30 Engineers in total, but there are only 21 in game at the moment (20 came with the 2.1 release, and an additional one was added in the patch last week). That explains why some have not appeared yet when the trigger level will have been reached. So not many more to be revealed at the moment. Keep at it!
 

electricmayhem

electricmayhem
This is awesome! Thanks so much for taking the time to make this!!

Now, my question is, why isn't something like this built into the game??? Frontier, you should give these guys free paint skins or something. Also, this needs to be in the game, because that's half our problem with engineers...too much data, and not a good way to organize it!
 

cosurgi

cosurgi
The viewer doesn't work for me. I made a copy and I tried to select a different engineer, but when I click the drop-down arrow I get this:

8eHLphe.png
 

Qohen Leth

Qohen Leth
cosurgi said:
The viewer doesn't work for me. I made a copy and I tried to select a different engineer, but when I click the drop-down arrow I get this:

http://i.imgur.com/8eHLphe.png
Click to expand...

You have to select the module first. Then the engineer dropdown adapts itself.

- - - - - Additional Content Posted / Auto Merge - - - - -

electricmayhem said:
This is awesome! Thanks so much for taking the time to make this!!

Now, my question is, why isn't something like this built into the game??? Frontier, you should give these guys free paint skins or something. Also, this needs to be in the game, because that's half our problem with engineers...too much data, and not a good way to organize it!
Click to expand...

I won't comment on totally absurd sutff in an otherwise overall great game ;)
 

cosurgi

cosurgi
Qohen Leth said:
You have to select the module first. Then the engineer dropdown adapts itself.
Click to expand...
So I select FSD from the first dropdown, in the second one there's still Selene Jean, and the red ribbon on top right corner. And when I click it, it says invalid content :( I tried putting in this cell by hand the name Felicity Farseer, but this didn't work either.

EDIT: I managed to get this to work, here's what I had to do:
1. Highlight cell with Selene Jean
2. in menu Data->Validate click "remove validation"
3. paste by hand the name Felicity Farseer
 
Last edited:

Qohen Leth

Qohen Leth
cosurgi said:
So I select FSD from the first dropdown, in the second one there's still Selene Jean, and the red ribbon on top right corner. And when I click it, it says invalid content :( I tried putting in this cell by hand the name Felicity Farseer, but this didn't work either.

EDIT: I managed to get this to work, here's what I had to do:
1. Highlight cell with Selene Jean
2. in menu Data->Validate click "remove validation"
3. paste by hand the name Felicity Farseer
Click to expand...

Maybe you did sthg wrong before, it's not supposed to behave like that. If you had the cursor in the cell before trying to use the dropdown menu, it may have 'blocked' the menu.
 

SpocksOddSocks

SpocksOddSocks
Just did a spot of mining to test the trading progression towards Marco Qwent. Sold ~1.5M credits worth of cargo (mostly Platinum and Palladium). Went from 1% grade 3 to 19% grade 3. I make that in the region of about 80,000cr profit per percent at level 3. Like with some of the others progressions, I needed to relog before I saw any of the progression.
 

bad-r0bot

bad-r0bot
eugeniy said:
updated
http://s017.radikal.ru/i426/1606/6d/b25e802cffe4.png
Click to expand...

Could you make the colors a bit more different/contrasting? I can't tell if colors like Elvira's FSD are my eyes playing tricks on me or not. I figured it out by comparing all the slightly off orange ones though. A color code would be useful if viewing the image on its on :)

Can you add, in between the engineers, the rank required to unlock the next one too? Or a note saying that all engineers unlock at about rank 3+33%.
 

Qohen Leth

Qohen Leth
cosurgi said:
So I select FSD from the first dropdown, in the second one there's still Selene Jean, and the red ribbon on top right corner. And when I click it, it says invalid content :( I tried putting in this cell by hand the name Felicity Farseer, but this didn't work either.

EDIT: I managed to get this to work, here's what I had to do:
1. Highlight cell with Selene Jean
2. in menu Data->Validate click "remove validation"
3. paste by hand the name Felicity Farseer
Click to expand...

There was indeed a problem there, you were right. Maybe someone with access messed it up without realizing he did, sorry about that. I switched the dropdown menu back to its original state, it's working now.
 

The Tick

The Tick
Great stuff, thanks a lot to you all!

I'd like to contribute by trying to find out under which circumstances which type of manufactured material and which data package can be found. I started a new thread here, as I find this thread has other priorities (@Qohen: I hope that's ok with you).

Anyone willing to help me?
 

Qohen Leth

Qohen Leth
TheTick said:
Great stuff, thanks a lot to you all!

I'd like to contribute by trying to find out under which circumstances which type of manufactured material and which data package can be found. I started a new thread here, as I find this thread has other priorities (@Qohen: I hope that's ok with you).

Anyone willing to help me?
Click to expand...

Sure :) That's great news since we absolutely don't have the time to do that ourselves (haven't even unlocked a single engineer myself). I can add more columns and such on the components sheet and maybe organize things at your convenience, with edit access for you. Lemme how you feel about joining the team ;) We hang out on FleetComm, by the way. And we use Trello to coordinate.
 

The Tick

The Tick
Qohen Leth said:
Sure :) That's great news since we absolutely don't have the time to do that ourselves (haven't even unlocked a single engineer myself). I can add more columns and such on the components sheet and maybe organize things at your convenience, with edit access for you. Lemme how you feel about joining the team ;) We hang out on FleetComm, by the way. And we use Trello to coordinate.
Click to expand...

Thanks! Give me and the thread a few day and see how things develop. I'm not sure yet which data exactly we have to collect. Will report back once I have a more stable database at hand.
 
You must log in or register to reply here.
Back
Top Bottom