I've been saying we should be looking at the patterns!
I noticed a glint of a pattern on the side of an Ancient Relic, so I did a bit of manipulation on the image (edge-enhance, desaturate, curve adjustment).
Hopefully it's brought the pattern out a bit better.
I tried this with 3 different Ancient Relics and they all had the same design/layout.
https://cdn.discordapp.com/attachments/189512082482266112/242020735571197954/AncientRelic2.png
I see a similarity with the sequences on the data "servers" when they're being scanned.
day 3 in the search for the incident's site i'm getting closer
managed to align the star nebula and background perfectly...
Cheers Djtarjan, I'm looking for the details on how that system was triangulated.
What's your distance?
Yep. I really do think that the ruins is a stellar map, and after a bit of amateurish paintshop work, I'm more convinced now than ever.
Let's look at the mock up I posted earlier (thanks to hhiram for the original aerial view):
http://i.imgur.com/WNgLrNp.jpg
Now, my hunch is that IF the ruins are a stellar map, then it needs reference points in order to make it legible. If the large landing pad represents the site of the current discovered ruins, Synuefe xr-h d11-102, and IF the smaller landing pad is a second ruins site like the first one, AND if we go with the theory that a second ruins site must be in system Col 173 Sector KY-Q d5-47 as hinted at by Frontier's trailer (thanks to some great detective work by commanders in this thread), then this is how the architecture of the ruins lays out over top of a map of the galaxy (please excuse my horrid paintshop skills!):
http://i.imgur.com/JbtJgwV.jpg
NOW, looking at this a few things become apparent:
1. The thick blue cross lines in my sketch represent the X and Y axis of the galaxy, which just happen to line up perfectly with the very big ridge that juts out from the large landing pad at the alien site representing X, and the shorter big ridge that runs perpendicular to it representing Y. They line up perfectly.
2. Regarding the line that hhiram said pointed straight at Merope (one ridge of the wedge), if it is not meant to be a vector from the planet's surface but instead meant to be a galactic vector from the system itself, then the two lines represented by the smaller ridges coming off the large landing pad do indeed directly point to some major stellar objects. In my sketch, the red line points directly to either the Witchhead Nebula, the Barnard's Loop area, or possibly the Cone Nebula past them both. The green line, or the upper ridge from the large landing pad, directly points to either the Flaming Star Nebula or possibly the Triad of the North cluster.
Now, if I am right, and this is a map, AND there is a second set of ruins in Col 173 Sector KY-Q d5-47 waiting to be found, then I predict that this second set of ruins will look very much like this:
http://i.imgur.com/GyHLODP.jpg
It will be set up similarly to the first set, but from the perspective of Col 173 Sector KY-Q d5-47 where the large landing pad will represent that system, the small pad will represent Synuefe xr-h d11-102, and the large ridge will run same as in the first ruins BUT the shorter large ridge will go the opposite direction, and the smaller ridge wedge coming out of the large pad will point as I've shown in a whole new direction, with one ridge pointing (possibly) to Barnard's Loop and the other (possibly) to the Flaming Star Nebula.
That's my theory on the meaning of the ruins. Now as to what the obelisks and stuff on the inside of the ruins mean, they may just be more information or vectors telling us distances or marking other stellar objects for reference. Possibly.
http://i.imgur.com/tqMgTNF.png
Courtesy of Julian provided for reference.
----------I appear to have managed to cause a change in obelisk activation in the Canonn PG.----------
Here is the sequence I went through. With every monolith/pillar activated except for monolith 2 I scanned zone two and then zone three. Proceeded to monolith two and raised it and then returned to zone three. The northern area of zone 3 had a different obelisk lit up though the southern obelisk was the same. I proceeded to zone 2 and a different obelisk was activated there.
Note: The instance was not a fresh instance to begin with and because there were other commanders in the instance I can't say for certain there wasn't another instance that occurred that caused the change. I will say I moved quite quickly.
I will attempt to repeat this in solo in a fresh instance but for the time being I present this to you all to keep in mind there might be a relation between the monoliths and the obelisks activation.
EDIT 1: After starting in solo and trying to repeat the process as best I could I am unable to replicate the results. This was with the default obelisks activated which different than the conditions of the Canonn PG where the default obelisks were not activated. This will make this difficult to replicate as we are unsure what caused the obelisks to change in the first place.
I'd still advise watching for interactions/changes with monoliths and obelisks. I will continue to attempt to duplicate these results and am hoping that it was not just a glitch.
Still can't un-see Star Wars stuff from the design. Or some sort of a turbine engine.Also, does anyone else think that the ruins look like the millennium falcon entering the letter box of a station? Probably just me watching too much star wars [big grin]
I've been flying around 3A for an hour now trying to line the stars up per the above, and while I can get them very close, they aren't lining up like I think they should. I'm beginning to think it might be a different moon in the system. The star pattern under the red arrow above, it looks more like a system of moons around a gas giant to me. Nothing like that is visible from 3A, I'm thinking this video was taken from a far out moon around one of the giants with several moons around them instead.
I noticed a glint of a pattern on the side of an Ancient Relic, so I did a bit of manipulation on the image (edge-enhance, desaturate, curve adjustment).
Hopefully it's brought the pattern out a bit better.
I tried this with 3 different Ancient Relics and they all had the same design/layout.
https://cdn.discordapp.com/attachments/189512082482266112/242020735571197954/AncientRelic2.png
I see a similarity with the sequences on the data "servers" when they're being scanned.
The more I look around, the more I agree. Looking at the skybox in-game, I'm not seeing that cluster of stars under the red arrow either. It might be glare on my screen that's messing my eyes up or something, but I doubt it. I'm no good at triangulation, but I want to draw more attention to Mengy's post so that someone who really knows their stuff can confirm what Mengy suggested here.
https://forums.frontier.co.uk/attachment.php?attachmentid=112873&d=1477766513
Something strange just happened to me on the relic site.
http://i.imgur.com/TwHeViJ.jpg
Unfortunately i didn't have video recording, and its not easy to see from this image.
Basically, i had 1 of each type of artifact in my hold, and was hovering over the circular "landing pad" when i started getting white fleks all around my ship (you can see some in the image). I tried to look around but didn't see anything, and it stopped. I tried to recreate the conditions, but it didn't happen again.
Something strange just happened to me on the relic site.
http://i.imgur.com/TwHeViJ.jpg
Unfortunately i didn't have video recording, and its not easy to see from this image.
Basically, i had 1 of each type of artifact in my hold, and was hovering over the circular "landing pad" when i started getting white fleks all around my ship (you can see some in the image). I tried to look around but didn't see anything, and it stopped. I tried to recreate the conditions, but it didn't happen again.
I started to think maybe something can be activated here somehow. Tried dropping all 5 items on the landing pad area, but nothing happened.
Then i tried to put myself in the mind of Mike Brookes, but all i could think was "What a sexy beard I have", so that was a useless exercise.
Anyway, something strange went down and i have no idea what or why. Perhaps others can see if they can give it a go, see if they can reproduce.
By the way, was in solo. Nobody else could have caused those flecks, and it wasn't chaff, 100%.
Otherwise, ill try again tomorrow.
An idea i have is 5 different objects. I'd bet they are needed together. What else needs doing? Maybe all beacons need scanning then taking all the artifacts to the center "landing pad" area.
Something to try anyway.
IT is chaff you can see it reloading on your UI so you used it in the time you took the screenshot as it takes about 5-10 seconds to reload, also if you had no chaff ammo it wouldnt say reloading so it was definitely your chaff dude