Still having a problem with the main panel after the latest update.
TCE now saves the size of the panel. But when I move it to the bottom of the screen it only stays there until I click on something else like Database, Personal, Commodities etc. Then it jumps back to the top of the screen.
I'm not playing Elite at the moment, waiting for FD to sort out the missions. So in no rush for a fix for TCE, but do install and try TCE after every update.
Why were the panel settings not transferred from the v1.4.1 of TCE?
Thanks for the great work you are doing.
TCE now saves the size of the panel. But when I move it to the bottom of the screen it only stays there until I click on something else like Database, Personal, Commodities etc. Then it jumps back to the top of the screen.
I'm not playing Elite at the moment, waiting for FD to sort out the missions. So in no rush for a fix for TCE, but do install and try TCE after every update.
Why were the panel settings not transferred from the v1.4.1 of TCE?
Thanks for the great work you are doing.
Last edited:
Will take a look now, why the bottom panel jumping back.
The settings are transferred, but the new auto-correction had some issues, so if you transferring it again, with the updates of course, it should work as before.
@Edit: Found the issue, will be fixed with the next update.
Last edited:
You have something running in the back, which blocks the clipboard function. Deactivate it and you are fine.
Im having 3 problems
1. Running the Verify Database command results in everything passing except personal db fails
2. Opening the the Route Planner without a route loaded results in the following error
3. Once a route is started i cannot stop it. Seems i have to completely reboot TCE to start a new route.
1. Running the Verify Database command results in everything passing except personal db fails
2. Opening the the Route Planner without a route loaded results in the following error
3. Once a route is started i cannot stop it. Seems i have to completely reboot TCE to start a new route.
1. Did you try to repair it?
2. Will check the issue when home.
3. You can stop a route, created by the Route Planner, by opening the Route Planner panel and hit the 'Stop Route' button.
I'm having issues getting this to run. It shows it loading to 100%, then a warning window pops up about the monitor resolution and asking if I want TCE to resize all the panels to fit. It doesn't matter if I select yes, no, or cancel, the window just continues to pop back up again. It keeps doing so until I close TCE using the task manager as I can't close it any other way. I followed the instructions in the manual for a first time run and I'm not sure if I did something wrong or if there is perhaps an issue with the resizing of the panels.
You can ignore my last post as I decided to try it again and this time it resized properly and started up ok.
I am playing with a 4:3 monitor, and with the latest update, I can't get passed "Your selected monitor resolution is smaller then the size of the Main User Interface. Do you want to let TCE resize the all panels, so they all fit into screen?"
I have three options, Yes, No and Cancel.
If I press Yes or Cancel, the question repeats itself. If I press No, I get a question asking me "Do you want to keep the selected monitor to display TCE?" Yes, No. If I hit Yes or No, I am back at the initial question.
Previous versions did not have this and since I do have two monitors, two panels were on the second monitor, not an issue for me at all. But, no matter what I click with this warning, I end up in a loop and can't start TCE.
EDIT: If I spam the close message button, it slowly starts to load TCE... so my guess is that it asks this question for each panel, and that is why it felt like an endless loop?
EDIT 2: Ok, this doesn't work... now that TCE is loaded, these warnings keeps popping up as soon as I click on anything in TCE.
I have three options, Yes, No and Cancel.
If I press Yes or Cancel, the question repeats itself. If I press No, I get a question asking me "Do you want to keep the selected monitor to display TCE?" Yes, No. If I hit Yes or No, I am back at the initial question.
Previous versions did not have this and since I do have two monitors, two panels were on the second monitor, not an issue for me at all. But, no matter what I click with this warning, I end up in a loop and can't start TCE.
EDIT: If I spam the close message button, it slowly starts to load TCE... so my guess is that it asks this question for each panel, and that is why it felt like an endless loop?
EDIT 2: Ok, this doesn't work... now that TCE is loaded, these warnings keeps popping up as soon as I click on anything in TCE.
Last edited:
I am playing with a 4:3 monitor, and with the latest update, I can't get passed "Your selected monitor resolution is smaller then the size of the Main User Interface. Do you want to let TCE resize the all panels, so they all fit into screen?"
I have three options, Yes, No and Cancel.
If I press Yes or Cancel, the question repeats itself. If I press No, I get a question asking me "Do you want to keep the selected monitor to display TCE?" Yes, No. If I hit Yes or No, I am back at the initial question.
Previous versions did not have this and since I do have two monitors, two panels were on the second monitor, not an issue for me at all. But, no matter what I click with this warning, I end up in a loop and can't start TCE.
EDIT: If I spam the close message button, it slowly starts to load TCE... so my guess is that it asks this question for each panel, and that is why it felt like an endless loop?
EDIT 2: Ok, this doesn't work... now that TCE is loaded, these warnings keeps popping up as soon as I click on anything in TCE.
Did you updated the the newest version?
I would love to see TCE supporting multiple accounts. And changing the EDMC account to correspond with the ED account is a minor thing to have to do.
Yes... I have 1.4.2.3
Make a parallel install of TCE, each for an account and you are good to go.
What resolution you are using with your monitor and please send me your ErrorReportFiles.7z with the 'Report an Error' button at the launcher. Thanks.
Last edited:
Hi Eventure,
Great software, which is improving constantly, I have one very minor issue.,
Some of my body and star pictures that I have taken are not appearing in the Cartography Screen.
The .png files are present in the CARTOGRAPHY Folder and when I take a new picture they are replaced correctly.
It seems to be the bodies and stars that I took photos of towards the end of my last session in game prior to updating to 1.4.2.3
Thanks
Goldleader
Great software, which is improving constantly, I have one very minor issue.,
Some of my body and star pictures that I have taken are not appearing in the Cartography Screen.
The .png files are present in the CARTOGRAPHY Folder and when I take a new picture they are replaced correctly.
It seems to be the bodies and stars that I took photos of towards the end of my last session in game prior to updating to 1.4.2.3
Thanks
Goldleader
Morning Eventure
Minor feature request - with the excellent ability to bypass the launcher on start, the one drawback is there's no way to see what version you're currently running. Can you add under the Options screen somewhere, a simple label on the installed version please. That will allow an easy check with the forum page.
Minor bug (again) - with upgrade to latest main release of TCE, my visited count have all reset again....
Minor feature request - with the excellent ability to bypass the launcher on start, the one drawback is there's no way to see what version you're currently running. Can you add under the Options screen somewhere, a simple label on the installed version please. That will allow an easy check with the forum page.
Minor bug (again) - with upgrade to latest main release of TCE, my visited count have all reset again....
The TCE version is displayed at the Options panel, below the buttons and reported as soon as TCE was loaded through the event reporter.
The visit count is generated through the Logbook database. How many entries the old and new file holds?
Please create an error report by using the 'Report an Error' button at the launcher, so I can check the files. Maybe you can add the pictures/names, that won't show up too, from the Cartography folder.
After you took a photo, is the picture box blank for the star/body or you see there the 'Take Picture' button again?
Are the photo's not displaying at the Stars/Bodies Database or at the System View?
Please add a screenshot of the panel to your report, when the picture's are not displayed.
Thanks
Last edited:
Update (1.4.2.4) released:
- Fixed an issue when decreasing the font size of a panel.
- Fixed an issue when changing the X/Y position of a panel through the Options panel.
- Fixed an issue with the Main UI when moved to the bottom of a screen.
- Fixed an error, if something blocking the clipboard. The function can be deactivated on error.
- Fixed an issue on the TCE_Personal.db database repair operation.
- Fixed an error at the Route Planner panel at certain filter settings.
- Fixed an issue with the Resize Panels Message box, repeating itself when hit No/Cancel.
- Fixed an issue not showing the Monitor 1 option on Multi-Monitor setup's at the Options panel.
Note:
Copy all files and folders from the update into your TCE installation folder to update your version.
I like to remind any user, who wants to use TCE in french or spanish, to help in translating the
latest commodities and interface phrases at OneSky. Thanks in advance.
- Full-Version 1.4.2 installer: http://bit.ly/2gV8GIv
- Update V1.4.2.4: http://bit.ly/2glGEla (Full-Version 1.4.2 required)
- Fixed an issue when decreasing the font size of a panel.
- Fixed an issue when changing the X/Y position of a panel through the Options panel.
- Fixed an issue with the Main UI when moved to the bottom of a screen.
- Fixed an error, if something blocking the clipboard. The function can be deactivated on error.
- Fixed an issue on the TCE_Personal.db database repair operation.
- Fixed an error at the Route Planner panel at certain filter settings.
- Fixed an issue with the Resize Panels Message box, repeating itself when hit No/Cancel.
- Fixed an issue not showing the Monitor 1 option on Multi-Monitor setup's at the Options panel.
Note:
Copy all files and folders from the update into your TCE installation folder to update your version.
I like to remind any user, who wants to use TCE in french or spanish, to help in translating the
latest commodities and interface phrases at OneSky. Thanks in advance.
Last edited:
ummmm... bad file link for 1.4.2.4