Hardware & Technical 8 to 6 pin PCI-e Adapter!

Hello!

My friend is using my old PSU and GPU for his new build (for the time being).

My old GPU requires 2x 6 pin PCI-e connectors.
And my old PSU has 1x8 and 1x6 PCI-e connectors. The 8 pin is NOT a 6+2, it's fixed.
I used to have an adapter for it, but it's not in my box of random PC parts. So it's basically gone. (God knows where, i never put any PC parts anywhere else!)

And I can't seem to find a replacement on eBay or anywhere.
There's loads of 6 to 8 pin adapters, and even 8 to dual 6/8 adapters, but no simple 8 to 6 pin, or even 8 to 6+2... Help!

If anyone can link me to a cheap UK seller, that'd be grand!
 
Hello!

My friend is using my old PSU and GPU for his new build (for the time being).

My old GPU requires 2x 6 pin PCI-e connectors.
And my old PSU has 1x8 and 1x6 PCI-e connectors. The 8 pin is NOT a 6+2, it's fixed.
I used to have an adapter for it, but it's not in my box of random PC parts. So it's basically gone. (God knows where, i never put any PC parts anywhere else!)

And I can't seem to find a replacement on eBay or anywhere.
There's loads of 6 to 8 pin adapters, and even 8 to dual 6/8 adapters, but no simple 8 to 6 pin, or even 8 to 6+2... Help!

If anyone can link me to a cheap UK seller, that'd be grand!

Do not, go for the cheapest of the cheap, go for something in the middle, there's unfortunately quite a few incidents out there where too cheap adapters are simply poor quality and cause accidents.
 
Lol I found one for £1.15 from China. What could possibly go wrong! :D

I read somewhere that if the GPU allows, you can just stick the 8 pin in to the 6 pin slot, and leave the other two pins hanging over the edge... Does that work?
 
The difference between 6- and 8-pin is a ground wire indicating to the graphics card that the power supply can push out enough power over that connection (enough power on the rail and big enough wire gauge). You can technically put an adapter in there, but there's no guarantee that won't lead to spurious system shutdowns or fire.
 
You can get SATA to 6-pin PCI-E connectors.
PCIe 6-pin power: 75W. SATA power: 3 12V pins, Molex specs their crimp terminals for those at (a lower limit of) 1.5A which would make for a total of 52W. Add a 6 to 8 pin connector and you have something that tries to draw up to three times the rated current through that connector.
 
Last edited:
I remember when I went to use an old power supply for a new build, there was something about new CPU's dropping power that can affect older power supply that isn't compatible, just something to be aware of.
a quick search found this.
https://linustechtips.com/main/topi...u-or-new-one/?do=findComment&comment=10328008
One thing I never scrimp on when I build a new system is the power supply.

this, as shadowdancer pointed out above as well, dont play with your PSU
 
It's only a temporary PSU until he can afford a new one. It did come with its own 8-6 pin adapter, but it's vanished.

I've told him it's really old, and he WILL need to replace it before buying anything else. Same for the 7 year old GPU.

But it ran my (almost identical) rig perfectly fine for 3 years, and my previous rig for about 6-7 years before that. :D


It is really OLD. lol
 
Back
Top Bottom