Add more carriges to monorail

[redsrum_]

Hello

I can't seem to get my monorail to be longer than 2 carriages. With roller coasters the seem to just get longer by lengthening the station, doesn't seem to be the case with monorail? When I make the station longer extra carriages are added but then it just reverts back to two when I open it. All stations are long enough to have at least three carriages, I just can't work it out.

I'm sure I'm just missing something, but any ideas?

Thanks

 

[Kitano123]

It should work as you describe, longer stations allow more carriages. You should double check if all your stations are long enough if they are it must be bugged.

 

[JRC]

It does work as you have described. When you are laying the station an extra carriage will appear automatically when it's long enough, when it appears don't immediately go back to laying normal track or it disappears again, lay just one more piece of station. Obviously all stations need to be a similar length

 

[Cooper1]

As long as you have all stations the same length and that you have actually extended the station, the problem should lie in the operations section of the ride menu.

Hopefully you can add more cars in there? Make sure to add cars and not trains.

 

[redsrum_]

Thanks guys, I rechecked all my stations and I have no idea how I did it, but one was slightly too small, possibly confused by it 'ghosting' what can happen, but didn't actually built the extra length.