Binding for HOTUS ONE Rudder pedals

Baciagaloop

B
I tried to use my rudder pedal to bind to YAW, but it will not work. Here is what the binding looks like, which I believe is incorrect:

1656871433988.png


So far as I know, the correct binding would be "Joystick Slider Y+". Is there a way to manually bind it? I would really like to use this rudder binder and save my stick twist and rocker slider for other functions.
 

STRONTIUM DOG

STRONTIUM DOG
secondery why are you binding in the alternate flight control menu which means secondary or reserve ie non primary(mines blanked out)
press esc in the highlighted field to erase current bind re highlight for new input and use usb device to rebind
providing the device works in windows 1st the game should see the new input
 
Last edited:

Baciagaloop

B
STRONTIUM DOG said:
secondery why are you binding in the alternate flight control menu which means secondary or reserve ie non primary(mines blanked out)
press esc in the highlighted field to erase current bind re highlight for new input and use usb device to rebind
providing the device works in windows 1st the game should see the new input
Click to expand...
The secondary was there by default, not sure why. Problem is, the USB device (HOTUS ONE) binding [JOY V-AXIS] does not work. It should be [JOY SLIDER Y+] but I do not know if there is a way to manually input.
 

GraphiteGB

GraphiteGB
If your dead zone on the stick is out in windows settings
The stick will register before you can press the pedals...
Static from your hand on the stick with the plastic handle is enough to trigger controlls when dead zone is too low...

Also insure the LIGHT on the T-flight one is out when switch is on PC mode as it means its in 5/8 mode so that rudders and twist are not all assigned to the same value...
 

Baciagaloop

B
GraphiteGB said:
If your dead zone on the stick is out in windows settings
The stick will register before you can press the pedals...
Static from your hand on the stick with the plastic handle is enough to trigger controlls when dead zone is too low...

Also insure the LIGHT on the T-flight one is out when switch is on PC mode as it means its in 5/8 mode so that rudders and twist are not all assigned to the same value...
Click to expand...
Thanks for your reply. The HOTUS ONE is set to 5/8 mode, but when I try to bind the pedals to E&D YAW axis, it doesn't work. The game uses the binding [JOY V - AXIS], but I believe the correct one is [JOY SLIDER Y+].
 

Bravo17

B
If that is what the game sees when you move the pedals to set the binding then it should work no matter what the game actually calls it.
 
You must log in or register to reply here.
Back
Top Bottom