Bridges over pools?

[Ramm]

Im trying to make a bridge over a pool, but it deletes the pool every time unless I make the path like 10 meters above the water.

Does anyone know a trick that I can use for this? Disable collision or something?

 

[Valdo82]

4m is all you get. I fiddled around with advanced move and i could maybe trim it to 3,8 -3,6ish, so yes 4m min height.

 

[Ramm]

4m is all you get. I fiddled around with advanced move and i could maybe trim it to 3,8 -3,6ish, so yes 4m min height.

Alright, hope this value gets lowered soon for pools

tnx

 

[Qwarth]

I get 3.5, but it has to be flat at three and a half not angled going into three and a half.

At the easiest method of getting a path over a pool is to build it on flat ground, use multi-select to get the path, advanced move to bring it up to three and a half, and then advanced move it over the pool. Much less fiddly

 

[MrHappy]

‘Suspended’ Path on or maybe Tunnelling off?

 

[Valdo82]

suspended didn't work, so best stick for the rule of thumb: go with 4m and then you have some wiggle room, if you have an bridge arch.

 

[Qwarth]

I did some yet testing yesterday. The actual answer is 3.38 m above the pool. At 3.37 it cuts the path to either side.