Coaster Supports Intersecting Buildings/Roofs

[joshRgordon]

Hey, there! Here's my issue: I've built a main street area that ends with a building/tunnel that takes guests under a large wooden coaster. The problem is -- the lift hill supports intersect the roof of the building and bleed right down above my indoor paths. Is there any way to prevent the supports from passing through the roof/walls of a building? I'm willing to remove all the supports completely and build a faux lift hill out of scenery items in order to keep it from bleeding into the ceiling, but that will take some time. Thank you!

- Josh

 

[TemmV2]

If you select a section of lift hill or any track you have the option to disable track supports, if that was what you were asking for??

 

[Zeptis]

If you select a section of lift hill or any track you have the option to disable track supports, if that was what you were asking for??

That completely disables all supports though, and may look odd especially if that section of coaster is high off the ground.

 

[jamesviago]

you want the the support to extend to the roof but not go through it?
no can do.
but you can turn off supports just for that piece of track, and use that feature carefully, to nudge the support to a better location.
and/or build a custom support from the roof up to your coaster.

WHICH REMINDS ME, we should have some coaster support bits as non-gridded items huh! so we can build our own.

 

[joshRgordon]

you want the the support to extend to the roof but not go through it?
no can do.
but you can turn off supports just for that piece of track, and use that feature carefully, to nudge the support to a better location.
and/or build a custom support from the roof up to your coaster.

WHICH REMINDS ME, we should have some coaster support bits as non-gridded items huh! so we can build our own.

Thanks for the responses, everyone. I was aware of the remove supports option for individual track pieces, but like you said here -- I wanted the supports to extend down to the roof of my entry tunnel and dining terrace, without penetrating them. So it looks like I'm building the supports by hand which hasn't been as awful as I thought it would be.

 

[caesar_andy]

In fact, there is a way.

You can use the terrain-tools to form a small pile of earth inside of the building, between the roof and the tunnel. As long as it is large enough to catch all the struts, they will not rech through it.