ED Oculus Settings R9 280X, AMD FX 8350, 8 Gigs DDR3 2400

[Bogricia]

Hello Everyone,
I just wanted to share my setup and see if there was anyone else running similar rigs and what settings they are using for the best ED Oculus Experience.

My Specs:
GPU: R9 280X
CPU: AMD FX 8350 (4 X 4.2gig)
Ram: 8 Gigs of DDR3 2400

My custom graphic setting is roughly:
Set to Low setting, then:
Moved draw distance slider to max
Changed Textures to High
Anti aliasing all the way up,
Turned effects to low,
and Model details to medium.
and left the rest where they were, (mainly on low)
(that should be pretty close, went from memory, Im not home)

At these settings everything runs well, but I feel like I should be able to get a little more out of it.

Feel free to share your similar rigs and the settings you like best. Thanks in advance for your posts.

 

[Decado]

Hello Everyone,
I just wanted to share my setup and see if there was anyone else running similar rigs and what settings they are using for the best ED Oculus Experience.

My Specs:
GPU: R9 280X
CPU: AMD FX 8350 (4 X 4.2gig)
Ram: 8 Gigs of DDR3 2400

My custom graphic setting is roughly:
Set to Low setting, then:
Moved draw distance slider to max
Changed Textures to High
Anti aliasing all the way up,
Turned effects to low,
and Model details to medium.
and left the rest where they were, (mainly on low)
(that should be pretty close, went from memory, Im not home)

At these settings everything runs well, but I feel like I should be able to get a little more out of it.

Feel free to share your similar rigs and the settings you like best. Thanks in advance for your posts.

Im still testing but heres what my settings are

DSR 2717 x 1415 (or something)
No AA ( i also tested at 1920x1080 with SMAA but prefer higher resolution and no AA)
Everything else on HIGH
except shadows on LOW

spec is in my sig

I get about 110- 120 in space
Around 75 - 98 in stations

Only tested those 2 areas though. Client is open play. Testing is ongoing

edit:

Just an update about performance

Visited a res site near Leesti. I have environment on Ultra and it looked great especially with the Sun shining over the asteriod field.

RES site = fps between 68 - 90 (never drops below 68 - it fluctuates and it does feel far smoother and sharper than before when i had the r9 290 and this was with a lot of objects/ships around)

Now the new sortof problem in RES sites is the judder or slight froze screen for a second. i didnt have this before in the 290 but its not too bad to be honest. The immersion level with sharper ships and effects on ships (like seeing small fires and stuff break out) is really good.

SUPERCRUISE

well i am surprised and pleased to report that my fps in OPEN in SC never dropped below around 69 - 70s ish Not once! And i am using more demanding settings as well. It did not feel jittery at all so i am pretty pleased with this.