gamma 1.01 broke DK2 support

[VR] Mad Mike

[VR] Mad Mike
has your refresh rate defaulted back to 60? if so you need to stick it to 72 or 75 to re-enable low persistence mode.

I get no ghosting @75, minimal @ 72 and a fair amount @60.
 

phinix

phinix
Mad Mike said:
has your refresh rate defaulted back to 60? if so you need to stick it to 72 or 75 to re-enable low persistence mode.

I get no ghosting @75, minimal @ 72 and a fair amount @60.
Click to expand...

Oh, will check it tonight!
But still - colors shouldn't change right? Especially during supercruise the whole spcae is like mixed stars and black "stains" moving a bit. Hard to explain...
 
Last edited:

Graywolfe

G
phinix said:
Oh, will check it tonight!
But still - colors shouldn't change right? Especially during supercruise the whole spcae is like mixed stars and black "stains" moving a bit. Hard to explain...
Click to expand...

That sounds like what I get if I switch the Rift between Direct and Extended. The colours go all wrong and there are noticeable black splotches in space, even on the loading splash-screen.

A reboot clears it for me.
 

thenickmove

thenickmove
For me it works in Direct, but it gets put at 60fps, so get a lot of stutters.
Extended works perfectly. The text seems a tiny bit less readable though, wonder what's up with that.
 

kPack

K
thenickmove said:
For me it works in Direct, but it gets put at 60fps, so get a lot of stutters.
Extended works perfectly. The text seems a tiny bit less readable though, wonder what's up with that.
Click to expand...

I really dont like Dirct mode cause you cant downsample or use Nvidia DSR with it. I run a gtx780ti oc , and i can now DSR from 2800x1504 since gamma(before i had to run from 2300x1.... and shadows off) , its a big improvement... textures high , shadows medium , blur off , Ambient off, AA off rest on high and runs so smooth GREAT JOB FD keep it UP

P.S guys if you can downsample or use Nvidia DSR try it it makes it look so so so much better .....
 
Last edited:

thenickmove

thenickmove
Thanks for the tips. I'll try. ATM I have everything on high without downsampling, cause it makes it stutter a bit, but I'll compare it to your recommended settings :)
Also...do other people also get this 'purple' ghosting if you look away from dark objects? For example dark planets and the frame of your sidewinder? Is that my oculus, my settings, oculus in general or a problem of ED?
 

grodenglaive

grodenglaive
kPack said:
I really dont like Dirct mode cause you cant downsample or use Nvidia DSR with it. I run a gtx780ti oc , and i can now DSR from 2800x1504 since gamma(before i had to run from 2300x1.... and shadows off) , its a big improvement... textures high , shadows medium , blur off , Ambient off, AA off rest on high and runs so smooth GREAT JOB FD keep it UP

P.S guys if you can downsample or use Nvidia DSR try it it makes it look so so so much better .....
Click to expand...
Thanks for the tip - haven't tried DSR yet.

By the way, I had to reset the screen resolution for 1.02. Not sure if it was because I was messing around with things when playing on the main monitor, but when I switched back to secondary monitor and oculus mode, the resolution did not default to 1920x1080 - it was some weird value and looked crappy.
[edit] also had to fix the refresh rate.
 
Last edited:

[VR] Mad Mike

[VR] Mad Mike
Mad Mike said:
yeah obviously my performance dropped back a bit.... but its not too bad and certainly up from any of the betas for me.

currently trying medium detail at 72hz (extended as still on 4.2 drivers)

and it seems to run pretty damn well even in stations etc. I will need more time to be certain I can keep at this level, but this is on a(n overclocked) GTX670 which is below the rift minimum specs.

by the time this comes out, hopefully a 980 will happily run this at full bubble 75hz, maybe even with some supersampling.
Click to expand...

had to drop back to low again. oh well, no biggie it makes it easier to justify my new gpu ;)

on the bright side performance on low detail is better than it ever was in beta. checking for new drivers now. maybe things have improved since 344.48
 

Hamerstein

Hamerstein
I've had issues running DSR in SLi mode on the Rift. Have a pair of 970s and at 1080p it's perfect. Turn on DSR and while frame rates are smooth, I get a flicker, akin to the effect of a faulty neon light, this becomes more pronounced as I increase the DSR multiplier.

However, if I down sample, I don't suffer from any problems at all.

Is this a known issue?

Thanks ☺
 
You must log in or register to reply here.
Back
Top Bottom