Graphic settings

Good morning Cmdr's

I have been having a problem with my settings mainly HMD setting mine is set to 1.75 but when I set it to 2.0 the game crashes I have to close down start again. Is there anyone suffering the same problem or has a solution

many thanks

Rob
 
I have had cases where the game fail to start in the rift.
And when I do set the hmd setting all the graphics options has reset as well.

And the other night applying changes, most likely the hmd q setting would freeze the rift and ED.
Has so far managed to get it set right using ED profiler, but curious if it will stick.
 
You really didn't offer up much on the hardware settings your trying to push and only 1 of the game setting so the answer would be -who knows?. Given your early posting of overclocking you 1080, I would start with something like that. Ed is a VR challenge to gpu's. Any overclocks that you might get away with under most circumstances could be exposed in ED-VR as maybe a little too ambitious. Just a thought.
 
You really didn't offer up much on the hardware settings your trying to push and only 1 of the game setting so the answer would be -who knows?. Given your early posting of overclocking you 1080, I would start with something like that. Ed is a VR challenge to gpu's. Any overclocks that you might get away with under most circumstances could be exposed in ED-VR as maybe a little too ambitious. Just a thought.

Sorry not much info my setup runs ED fine I can change every setting in the options bar hmd 2.0 I've had no problem using the setting for months well since I purchased the 1080. I swap between 1.75 and 2 regularly depending on what I'm doing Cpu Gpu temps are fine around 50c game runs smooth. If I drop down to VR low and select 2.0 it still happens so not Gpu stress related

If I take the headset off I can see the mouse arrow continuously flickering on the apply like it's stuck. I'm pretty sure it's not hardware related but something has changed over the last week or so

Thanks for the reply Cmdr's

Rob
 
Sorry not much info my setup runs ED fine I can change every setting in the options bar hmd 2.0 I've had no problem using the setting for months well since I purchased the 1080. I swap between 1.75 and 2 regularly depending on what I'm doing Cpu Gpu temps are fine around 50c game runs smooth. If I drop down to VR low and select 2.0 it still happens so not Gpu stress related

If I take the headset off I can see the mouse arrow continuously flickering on the apply like it's stuck. I'm pretty sure it's not hardware related but something has changed over the last week or so

Thanks for the reply Cmdr's

Rob

Sounds like the same bug im having.
Rift its goes blank, the monitor display seem frozen and the cursor is g out.
Seems to have started after a windows update last week.
Or a oculus beta install, I have since opted out of the oculus beta but not much testing time yet.
 
Blob, get Dr. Kaiis excellent profiler tool and load your settings, then screenshot it to post here. Then we can see what's going on.
 
I will get a screen shot tomorrow and post it no chance tonight unfortunately . And TorTorten that is exactly what happens and like you said only a recent problem

Rob
 
No, this is suddenly a thing. I have Elite installed on 2 completely separate Windows installs (one dedicated to VR), and I'm getting really odd issues. I'll have to bug report them because they're becoming a problem.

Either the game simply fails to load - freezing when the HMD is activated. Or, if I get into the game, changing ANY graphic settings causes a freeze in the HMD, which causes me to miss the 'Are you sure?' countdown.
 
No, this is suddenly a thing. I have Elite installed on 2 completely separate Windows installs (one dedicated to VR), and I'm getting really odd issues. I'll have to bug report them because they're becoming a problem.

Either the game simply fails to load - freezing when the HMD is activated. Or, if I get into the game, changing ANY graphic settings causes a freeze in the HMD, which causes me to miss the 'Are you sure?' countdown.

Same here. Switching from HMD Headphones to HMD Speakers causes ED to freeze up in the Options menu at Cancel / Apply.
 
So this is becoming an issue now. If I launch the game from Home, I get a permanent blank screen on both the desktop and in the HMD, but I hear the game running.

If I launch from Steam, I get the same thing, and also occasionally SteamVR crashes with a Composite error.

If I launch from EDProfiler (godsend of a tool), it runs. However, if I change the HMD pixel density in-game the display blanks out for a good 5-6 seconds before I get to see the last remaining seconds of the 'are you sure' countdown. In many cases it takes TOO long and thus reverts back to whatever I changed it to before.

Anyone else suffering?
 
Last edited:
For me, usually the game would crash right after selecting the "HMD Headphones" option, but apparently after saving the settings. It would always come up fine after re-executing it. I've reinstalled the game twice, and it behaved that way both times.

I've only installed it through the FDev launcher, and through the Oculus store. Haven't tried it with Steam.
 
Back
Top Bottom