Im Happy.

It took a ton of work and a lot of time since im kinda lazy when it comes to grindfest-Games but Finaly i did it.

I got my cutter to 7k Shields with 50,6%/28,3%/58,6% Resistances

2 Large Pulse lasers (Efficient) 1 huge MC with corrosive mod (I can fire all those Weapons infinitly on 2 pips) and 4 Pack hound missile racks modded for high capacity Magazine (Almost maximum rolls on every Rack).
3 of the racks have overheat mod and one has Drag to slow faster and more agile ships down.

Today i got interdicted by a FAS with the Name "Salt Miner" so his intentions were absolutely clear. I deployed my Beam laser Fighter and together with my 2 large pulse lasers his bi-waves went down pretty quickly. Even though he had target interruption modded weps i got a lock and rained all the Missiles down on him... His hull melted like Ice in a midday desert.

Im Happy.

Edit: The resistances were a few percent off, corrected that.
 
Last edited:
Nice story. 7K with those resistances 😁

Going to have to check on corolis if that is even possible. Was that an 8A prismatic?

Enjoy your moment CMDR and await the players 'I got griefed by a god roll cutter' thread. The grind pays off 😎
 
Hi Happy.

980x.png


We use to work together. Remember?

350


Probably not, since I did do most of the work anyways.
 
Nice story. 7K with those resistances 😁

Going to have to check on corolis if that is even possible. Was that an 8A prismatic?

Enjoy your moment CMDR and await the players 'I got griefed by a god roll cutter' thread. The grind pays off 😎


There you go :) Still got my slot for the Heat sink so i can use my class 8 shield cell bank.

 
I'd also be happy if my Cutter was so tought...

How have you achieved such level of shields? I suppose you have Prismatic + Heavy duty + SCBs.

Currently working on Engineering mine, but far away from that level...

Will give the Pack Hound missiles a try, sounds like an effetive build, but have never tried missiles, not very fan of them...

Thanks for sharing OP and rep to you for your achievement...
 
Last edited:
I'd also be happy if my Cutter was so tought...

How have you achieved such level of shields? I suppose you have Prismatic + Heavy duty + SCBs.

Currently working on Engineering mine, but far away from that level...

Will give the Pack Hound missiles a try, sounds like an effetive build, but have never tried missiles, not very fan of them...

Thanks for sharing OP and rep to you for your achievement...

Rep back. Thank you kindly CMDR :)

Yes its Prismatics + 6 Heavy Dutys and one thermal Resistant Shield booster. All of them are pretty damn good rolls but i had to farm 60-80 (or even more) Rolls to get them to that level.
 
Last edited:
Hi Commander Vinvent!! How is your shield tank Cutter doing?

I need to confess that, as a Cutter only pilot, since the very moment I read about your achievement on getting this beauty to +7.000 MJ of shields, I just sat that same goal.

Now, I've managed the following:

8A Prismatic shields + G5 Reinforced Mod
+
5 X 0A Shield Boosters + G5 Heavy Duty Mod
+
2 X 0A Shield Boosters + G5 Thermal resistant Mod

I've come with the following numbers:

SHIELD: 6.186 MJ
KINETIC: 45.4%
THERMAL: 34.8 %
EXPLOSIVE: 53.3 %


As you can see, still a bit far from the 7.000 MJ goal...

My rolls are mostly good ones, but not God rolls in any way (I find mats farming to be one of the worst and most boring activities of my entire gamer life)...

I've been thinking on setting another Booster as Heavy Duty and leaving only one with the Thermal Resist mod, just as you said you have, but at this point, I don't know if thermal resistance is better than raw shield strength or not. I may try both setups on battle and see how do they feel, but some feedback on this regard will be highly appreciated...


Dammit, a HIGH GRADE EMISSION signal at last, I have to go...

Thanks and fly safe commanders.

CMDR Durden out.
 
Back
Top Bottom