Need help to binding setup T16000M FCS Hotas

[eisberg77]

Really need help in setting up my new T16000M FCS Hotas system. I have not played this game much, so I am a newbie.
it would be great that if any of you can help if you can just use this site to upload your bindings. This site takes your bindings, uploads them, and even puts a picture of what the buttons are assigned to.

https://www.mcdee.net/elite/

Just post the webpage result here on this thread when you generate it.

Thank you, and really appreciate any help.

 

[Nokrahs]

Greetings!

l like the T160000M FCS, just upgraded from the Hotas X a couple of weeks ago.
haven't used all the buttons yet because there are so many and I'm faster with the keyboard
in some cases with my left hand while the right hand remains on the stick.

anyways, here is my current sheet: https://www.mcdee.net/elite/binds/lufgal?replay=lufgal

the XBox One Controller settings are for SRV only.

cheers,

Nok

 

[the100thmonkey]

Just start with a minimal setup - pitch, roll, yaw, vertical and horizontal translation axes, throttle and fire buttons, then set up the rest as you need them.

 

[GunnerBill]

ED comes with bindings pre-set for the T16000m HOTAS and throttle. I didn't like them so I started from scratch.

Work in progress as I've only had it a week: http://www.mcdee.net/elite/binds/udqbpy

 

[CMDR MAIN SEQUENCE]

OP you'll find other's bindings in the official thread here (last 10-15 pages or so):https://forums.frontier.co.uk/showthread.php/283315-Thrustmaster-T-16000M-FCS-HOTAS-official-thread

And a few here (last few pages): https://forums.frontier.co.uk/showt...-T16000M-FCS?p=4827258&viewfull=1#post4827258

And here (last few pages): https://forums.frontier.co.uk/showt...et-Generator?p=4911767&viewfull=1#post4911767

Work in progress as I've only had it a week

LOL I've had mine for 6 weeks and I'm still not happy with my bindings

 

[GunnerBill]

OP you'll find other's bindings in the official thread here (last 10-15 pages or so):https://forums.frontier.co.uk/showthread.php/283315-Thrustmaster-T-16000M-FCS-HOTAS-official-thread

And a few here (last few pages): https://forums.frontier.co.uk/showt...-T16000M-FCS?p=4827258&viewfull=1#post4827258

And here (last few pages): https://forums.frontier.co.uk/showt...et-Generator?p=4911767&viewfull=1#post4911767



LOL I've had mine for 6 weeks and I'm still not happy with my bindings

It's like a new pair of really good shoes, takes ages to break them in but worth it in the long run. I'm excited at the possibilities - just this thread has opened up the idea that I can use the throttle "stick" for a very quick headlook function

 

[CMDR MAIN SEQUENCE]

It's like a new pair of really good shoes, takes ages to break them in but worth it in the long run. I'm excited at the possibilities - just this thread has opened up the idea that I can use the throttle "stick" for a very quick headlook function

Yeah that's what I use the mini-stick for and nothing else (I didn't like the thrusters being bound to it). Headlock is on by default and I press button 6 to turn it off (re-centre). I found it was too sensitive* when using the axis so I've actually bound the digital inputs which allows me to adjust the sensitivity slider. *will play around with Joystick Curves at some point.

 

[the100thmonkey]

Yeah that's what I use the mini-stick for and nothing else (I didn't like the thrusters being bound to it). Headlock is on by default and I press button 6 to turn it off (re-centre). I found it was too sensitive* when using the axis so I've actually bound the digital inputs which allows me to adjust the sensitivity slider. *will play around with Joystick Curves at some point.

Just strap your phone to your head and be done with it. It works much better than any manual input, and it comes with a curve editor.

 

[GunnerBill]

Yeah that's what I use the mini-stick for and nothing else (I didn't like the thrusters being bound to it). Headlock is on by default and I press button 6 to turn it off (re-centre). I found it was too sensitive* when using the axis so I've actually bound the digital inputs which allows me to adjust the sensitivity slider. *will play around with Joystick Curves at some point.

Curves, good luck with that. I had a look at the TARGET software which was really poorly designed (IMO)
And the vjoy / jcurves programme did not seem to work with it.

Please let me know if you make any sense of either software

 

[robinb]

Problems with T16000M FCS throttle

Hi all,

After upgrading from a superb Thrustmaster T-Flight Hotas X (with two warn microswitches) to the even more incredible T16000M FCS Hotas, I am having problems configuring the main forward thruster. The configuration seems to register the analogue input as 0 or 100% with no gradual increments. The only successful workaround I have found so far is to use the Thrustmaster TARGET software and its key binding configuration for Elite Dangerous. Unfortunately, it seems you have to run this application each time prior to starting Elite? Has anyone else experienced this issue and if so found a better solution?

 

[robinb]

Thrustmaster T16000M FCS HOTAS configuration issue.

Trying to use Elite Dangerous' pre-set T16000M FCS HOTAS configuration and the throttle's main analogue thrust jumps from 0 to 100% (analogue configuration) with no smooth increase. The only work around is Thrustmaster's TARGET app which has to be loaded with its Elite Dangerous configuration before starting the game. Has anyone else experienced this issue and found a better solution?

 

[FluffyBits74]

I tried 1st with that 'Target' software that thrustmaster provided, but my computer did not get on with it, so i uninstalled it. I started with the pre-set T16000M FCS HOTAS config, but have edited it quite a lot. Before this FCS hotas i was using the t-flight hotas x with the 'crab' binding layout, so wanted a setup that was as great. Here is my setup that seems to work very well for me, though i had to put small deadzones on most axis http://www.mcdee.net/elite/binds/mhgurg