The SRV throttle control is not working for me

The4thDoctor

The4thDoctor
I have tried turning "drive assist" both off and on. When I give it a tiny bit of throttle, the SRV zooms off, there is no controlling the speed. I used to be able to just move the throttle a little and I would keep a constant low speed, now in Odyssey alpha, there is no slow speed, it is either extremely fast or I can start out low but the throttle slowly drops off to zero. I am using a Saitek X-55 Rhino HOTAS. I tried the settings in the software and I still can not get it working right.
Can anyone help me fix this, or will this be fixed when Odyssey goes live?
 
Last edited:

The4thDoctor

The4thDoctor
Yes, I have tried deadzones with no luck. I have messed with curves, etc. I will upload binds in a little while, perhaps I am missing something.

EDIT: here are my binds, let me know if this is how you wanted me to display them.
I can dump the whole file as text if needed.
 

Attachments

  • binds.JPG
    binds.JPG
    65.1 KB · Views: 115
Last edited:

The4thDoctor

The4thDoctor
I switched to a different computer and the issue is gone, so I am going to reinstall everything on the previous computer and see if that fixes the problem.
 

STRONTIUM DOG

STRONTIUM DOG
I would try the nb method in my bindings guide after first backing up the existing folder to desktop first (which you can put back but may have a fault\conflict that you may have already saved to the profile)
(hope that makes sense)
 
Last edited:

lefty1117

L
I have the same issue, using KB/M. There is a delay from when the input is made to when the srv responds. This includes on stopping - if you are moving and reduce throttle to zero, but then use the handbrake to stop, when you release the handbrake the SRV will move again a short way. It's like there is some sort of queue in the execution of the move commands with the SRV.
 

jpjeffrey

jpjeffrey
The4thDoctor said:
I have tried turning "drive assist" both off and on. When I give it a tiny bit of throttle, the SRV zooms off, there is no controlling the speed. I used to be able to just move the throttle a little and I would keep a constant low speed, now in Odyssey alpha, there is no slow speed, it is either extremely fast or I can start out low but the throttle slowly drops off to zero. I am using a Saitek X-55 Rhino HOTAS. I tried the settings in the software and I still can not get it working right.
Can anyone help me fix this, or will this be fixed when Odyssey goes live?
Click to expand...
Same here - has a ticket been raised for this issue ? (I'd like to add my name)
 
You must log in or register to reply here.
Back
Top Bottom