I'm hoping someone might have the answer to this one. I've recently upgraded my X52Pro to a Virpil flight stick and throttle. When doing the settings for my new throttle I can no longer have or find how to get the throttle to a similar setting that I had previously were if I had my throttle dead center that was zero speed and taking forward was increase speed and back from center was reverse. I've been in the the throttle settings and clicked the + buttons but that only gives me two options of full range or forward only. Anyone else using a Virpil or who knows what to do, please let me know. Thanks.
Throttle settings
- Thread starter Rogue1474
- Start date
Virpil controllers are complex to set up and I'm no expert, but do use Virpil.
You need to use the Viripl Configuration tool to first calibrate your throttle and stick and save each VPC device
My throttle thrust is P1 (RX) shown in the attached screen shot of the Virpil Configuration Tool
Once calibrated and saved to device you can map the throttle to the in game >Flight Throttle >Throttle Axis [Joy RX-Axis]
I'm using "Full Range" to give me centre = 0 Thrust with Forward and Reverse thrust with stick forward and reverse
You need to use the Viripl Configuration tool to first calibrate your throttle and stick and save each VPC device
My throttle thrust is P1 (RX) shown in the attached screen shot of the Virpil Configuration Tool
Once calibrated and saved to device you can map the throttle to the in game >Flight Throttle >Throttle Axis [Joy RX-Axis]
I'm using "Full Range" to give me centre = 0 Thrust with Forward and Reverse thrust with stick forward and reverse
Attachments
Use the full range setting, if you use the forward only, you have to asign a reverse button.
This is how it works for me and my warthog controller.
Then you may have to adjust your center in the Virpil software.
This is how it works for me and my warthog controller.
Then you may have to adjust your center in the Virpil software.
Thank you so much for your help with this, that was what I needed and it's working as I need it to. Appreciate your help Commander. o7.