Track Rides Train Station

Since i've pretty much finished my pirate park, i've started a new one tailored around a mor fairy-tale like scenario. The first result is the new train station, meant to be used as a transportation hub. It's a single track Connie Express ride with 3 stations side by side inside the station building.

You can find the blueprint here:
http://steamcommunity.com/sharedfiles/filedetails/?id=1267935080

Of course, the pathing needs to be added manually.
The access to the first station is from the outside, slightly right under the big clock. The other stations are meant to be accessed through the basement. Put down the pathing in the basement first and connect it to the access points at the stations first. Then proceed to make some stairs through the gap in front of the building (near the princess statue in the basement). To connect the exit of the stations, just build a simple bridge behind the toilets/hats fantastic shops at the rear end of the station platforms. This is actually easy, as there's plenty of room. The tricky part is the basement, as the track stations need to be slightly higher than the station grid. If not, they would show through basement roof and the tracks wouldn't be flat on the ground at the point the train leaves the station. Be also sure to add new front triggers for the speakers announcing that the train is leaving, as they're located outside on each of the first track pieces, if you adjust the tracks to your park.

Anyway, here are some pictures:















 
Last edited:
Back
Top Bottom