Type-9 Bug?

[777Driver]

For want of a better word, my Type-9 is screwed! Have been using my T9 for a few weeks, ship has been performing flawlessly and I have been flying it exclusively.

I recently setup base in TZ Arietis since it stocks all upgrades, went on a shopping spree, bought and upgraded a Viper/Cobra/Eagle/Adder & ASP. Have been out in neighboring systems taking the ships on test runs since yesterday. Just got back into my Type-9 and the windows are frozen over, all modules are shutdown and power usage is 19.32MW, available 12MW, power usage is 160%! :/

Everything was fine when I left the ship yesterday.. Could it be that I spent so much configuring other ships?

Edit - Sorry pics didn't come out to clear, the figures I quoted a re correct. 60% over my limit

Spoiler

Spoiler

Spoiler

 

[Vandaahl]

It was working fine yesterday with a A3 power plant? 0_o
You have an A5 shield. No way you would be able to power an A5 with an A3 power plant. On my Python I'm using an A5 shield as well, but with an A5 power plant.
The 19.32 MW is what is to be expected. My Python consumes about the same amount. Different ship, I know, but the hardware is pretty similar.

 

[Hooplah]

Other than the obvious per a sub-par 12Mw power plant which I'm sure you've checked. Was it 12Mw yesterday? Maybe swap out T-9 gear back to lower modules then back up again to see if the numbers are then correct? Check the other ships to see if they changed when you did? Seems like gather info and send in a ticket.

 

[777Driver]

It was working fine yesterday with a A3 power plant? 0_o
You have an A5 shield. No way you would be able to power an A5 with an A3 power plant. On my Python I'm using an A5 shield as well, but with an A5 power plant.
The 19.32 MW is what is to be expected. My Python consumes about the same amount. Different ship, I know, but the hardware is pretty similar.

Ok that all makes sense, but then why was the ship working before, that must be the bug? honestly guy's, i wouldn't take the time post here if it wasn't how I said it happened. The problem should have occurred as soon as the modules where installed.

@Hooplah, had not changed the power plant, it's always been the same.

Anyway thanks guy's, will strip the ship down and start again.