Unable to complete a guardian data terminal

I'm in the systeme Synuefe IL-N c23-19 B 2 (where the guardian structure are) i've looked some video and it says the same thing as you know, all 6 pilon is fully activated, all sentinal that i was able to find is destroyed and the pad near the data terminal seems not to accept all the ancient relic i've found. I've tried in any direction and jettison of the pad

Does the place is bug or i'm doing it wrong ?

(Ps i came back online just to get the guardian fsd booster)
 
If you have already activated the terminal once, you will have to log out, or fly out above the drop zone to reset the instance, then try again.
If you have not already activated the terminal and obtained a blueprint, then it may be bugged and log off and back in may make it work.
 
I'm in the systeme Synuefe IL-N c23-19 B 2 (where the guardian structure are) i've looked some video and it says the same thing as you know, all 6 pilon is fully activated, all sentinal that i was able to find is destroyed and the pad near the data terminal seems not to accept all the ancient relic i've found. I've tried in any direction and jettison of the pad

Does the place is bug or i'm doing it wrong ?

(Ps i came back online just to get the guardian fsd booster)
When you try to jettison a Relic into a triangle hole - it shoots out of your SRV as if you just throw it out instead of going into a hole?

If - Yes - then:

It is not a bug, you just need a bit more precise positioning. I've met a few commander in Guardian Ruins in the last month who had the same problem. Do it once correctly and you'll never miss again.

- Check if you have Ancient Relic (Blue crystal cylinder, that you get from the top of pilons appearing from the ground)

- Position your SRV right at the center of that triangle. In Scarab SRV you should see the hole through the bottom of SRV cockpit. It should be right below your commander. (Use Headlook / Mouse look for that).

- When you position your SRV in the correct position - Relic will go right into the hole when you jettison it.
 
I'm in the systeme Synuefe IL-N c23-19 B 2 (where the guardian structure are) i've looked some video and it says the same thing as you know, all 6 pilon is fully activated, all sentinal that i was able to find is destroyed and the pad near the data terminal seems not to accept all the ancient relic i've found. I've tried in any direction and jettison of the pad

Does the place is bug or i'm doing it wrong ?

(Ps i came back online just to get the guardian fsd booster)


Guardian Fighter Blueprints (core from Guardian beacon is required)

Synuefe EU-Q c21-15
NGC 2451A Sector VJ-R c4-22
Synuefe AH-J d10-103
Synuefe IL-N c23-19 <- You are here
Synuefe AH-J d10-20
IC 2391 Sector FL-X b1-7
Synuefe PF-E b45-5
HIP 36781
Synuefe ZG-J d10-79
Synuefe EN-H d11-96
Synuefe AH-J d10-46


Guardian Beacon locations

Synuefe KU-F b44-4
NGC 2451A Sector LX-U d2-25
Synuefe OF-E b45-4
Synuefe IL-N c23-15
Synuefe ZG-J d10-49
IC 2391 Sector MX-T b3-6
Synuefe QA-E b45-4
HIP 36823
Synuefe CS-H d11-121
Synuefe RL-C b46-6
Synuefe HA-P C22-22

(source: https://steamcommunity.com/app/359320/discussions/0/3113644379497881902/#c3113644379498743179 )
 
(Ps i came back online just to get the guardian fsd booster)
Try visiting Synuefe NL-N C23-4 body B3
This is a module site and will give you the blueprint fragments you are looking for.
Make a handful of revisits (just fly out to orbit again, then drop back in) to collect data scans and mats to do your unlock.

Canonn page with list of sites:
 
How can i know if it take an Ancient key or a relic
As others have said - the Canonn site seems still to be the best source (they've butchered the online lists to remove the blueprint and the Mooing list on the forums is similarly useless for this). Scroll down to the bottom of the page for the locations of all the blueprints https://canonn.science/codex/guardian-structure/

From looking at the hole it is impossible to tell - because keys and relics look the same, so this comes up all the time 🤷‍♀️
 
Back
Top Bottom