Unrecognized device: Thrustmaster T-Flight HOTAS One.
Bindings attached.
Bindings attached.
Release EDRefCard - makes a printable reference card of your controller bindings
- Thread starter VerticalBlank
- Start date
- Status
No.
It is not. Apologies for the late reply.
My HOTAS is the HOTAS One, which is the XBox/PC variant.
T.Flight Hotas One - Flying | Thrustmaster
ENJOY THE THRUSTMASTER ISLAND WITH THE T.Flight Hotas One
www.thrustmaster.com
On the stick base, there are XBox buttons, Start, Back, XBox button, they have the same functionality as a regular XBox controller, these are where the 3 buttons on the throttle are.
The 3 buttons on the throttle are buttons 13, 14, and 15 and act as mode toggle, cycle fire groups fwd and back.
Attachments
If I'm reading your binds correctly:
Button 13 is "previous fire group"
Button 14 is "next fire group"
Button 15 is toggle hud mode.
I can see what the differences are now - thank you! It wasn't obvious from pictures that the SE/ST buttons "moved". Give me a while, but this should be doable!
J
Button 13 is "previous fire group"
Button 14 is "next fire group"
Button 15 is toggle hud mode.
I can see what the differences are now - thank you! It wasn't obvious from pictures that the SE/ST buttons "moved". Give me a while, but this should be doable!
J
Best to post a new thread in https://forums.frontier.co.uk/forums/elite-dangerous-pc/ asking for suggestions.
This is just about EDRefCard. Thanks.
@AboutThreeFiddy Can you send me your binds file please? (or at least a section of it showing the device ID)
Thanks!
Thanks!
Sure here ya go - let me know if you need more, thanks in advance!
Code:
<YawLeftButton>
<Primary Device="{NoDevice}" Key="" />
<Secondary Device="28DE11FF" Key="Neg_GamePad_RStickX" />
</YawLeftButton>Unrecognized device:
Reference "nzyvjv"
Example bindings snippet:
- VKB Modern Combat Grip Pro with twist, attached to
- VKB Gunfighter Mk. III base, connected to
- VKB Blackbox Mk.II
Reference "nzyvjv"
Example bindings snippet:
Code:
<BuggyRollAxisRaw>
<Binding Device="231D0125" Key="Joy_XAxis" />
<Inverted Value="0" />
<Deadzone Value="0.00000000" />
</BuggyRollAxisRaw>
Last edited:
Using 2 virpil alphas as a HOSAS setup which work but when I try to print a Ref card I get this as an unknown controller but people have posted their own bindings where you get a picture of the alpha with the actions assigned so how are people doing this? When I look in their bind files there is no device name listed the same as mine so dont understand? (Ref akhxsp)
The original EDRefcard hasn't been updated in a while, try https://edrefcard2.epaphus.uk/ it has support for more devices.
Thanks will give it a go
virpil alpha prime, reference zpggii
Did you try the original release, or the more updates one, listed above?
"The original EDRefcard hasn't been updated in a while, try https://edrefcard2.epaphus.uk/ it has support for more devices."
J
Yeah I can find the blank card what I was trying to do was create a card using my custom binds where it says generate ref card that's when it says unknown controller but it must be possible as there are twin alpha cards published by other people on the edf site
- Status