42 mill!?I just turned in another 10 mil with my cutter for about a hour and half of work. I've collected around 42 mil so far. What is the range for top 10 CMDRs?
(Parks Cutter, loads up Vette).
42 mill!?I just turned in another 10 mil with my cutter for about a hour and half of work. I've collected around 42 mil so far. What is the range for top 10 CMDRs?
Thanks for that! A few days ago I checked that site and thought it hasn't been updated recently because the DataEntryForm page gives the wrong name for the current CG (see below). But since the info on the page you linked seems up-to-date, I guess that the CG name on the form doesn't matter much, though fixing that would make it less confusing.Don't forget you can check this page for current progress:
https://sites.google.com/site/cgtthreshcalc/plugingeneratedresults (CG2 tab)
The manual entry stuff probably isn't up to date (my bad, I think - have to go look at the back end again to see if I can address that) - if you have the EDMC plug in though your stats are automatically contributed to the auto-generated progress monitor, which is what most people use. This does assume you are playing on the PC - unfortunately no automated option exists for console.Thanks for that! A few days ago I checked that site and thought it hasn't been updated recently because the DataEntryForm page gives the wrong name for the current CG (see below). But since the info on the page you linked seems up-to-date, I guess that the CG name on the form doesn't matter much, though fixing that would make it less confusing.
View attachment 150896
Don't forget you can check this page for current progress:
https://sites.google.com/site/cgtthreshcalc/plugingeneratedresults (CG2 tab)
People turn the plug ins off after they get into top 10% to stop other people guessing the correct placements... only the honest players allow complete tracking...It seems that is not correct though, because it says it should be around 31 million to get in the top 10 and there are people with more than 40 million that are not there yet.
Top 10 CMDRs | ~ 51,350,923 to 131,868,938 | 11,628,000 Cr |
Top 10% | ~ 13,278,628 to 51,350,922 | 9,302,400 Cr |
Top 25% | ~ 5,850,344 to 13,278,627 | 6,976,800 Cr |
Top 50% | ~ 2,193,470 to 5,850,343 | 4,651,200 Cr |
Top 75% | ~ 629,025 to 2,193,469 | 2,325,600 Cr |
Top 100% | ~ 1 to 629,024 | 500,000 |
People turn the plug ins off after they get into top 10% to stop other people guessing the correct placements... only the honest players allow complete tracking...
Inaras alot slower as it takes data every 48 hours from each registered user if they did not disable it. this is 48 hrs from the last time it was updated...Lol, didn't know about that.
Yeah, Inara seems to be more accurate.
Inaras alot slower as it takes data every 48 hours from each registered user if they did not disable it. this is 48 hrs from the last time it was updated...
so if they manualy updated at 12PM GMT, the next auto update is in 2 days at the same time. but its doing updates for every single user who linked the account to Fdevs CAPI all the time..
No worries, and thanks for all the info! BTW, are you the owner of the CGTThreshCalc site? If not, can you tell me the person's Forum name? I just want to respond to the request about improving the look of the site.The manual entry stuff probably isn't up to date...
PProvart on here owns the site but I believe Kietrax can also edit it.No worries, and thanks for all the info! BTW, are you the owner of the CGTThreshCalc site? If not, can you tell me the person's Forum name? I just want to respond to the request about improving the look of the site.
Great, thanks!PProvart on here owns the site but I believe Kietrax can also edit it.
Viper 3 | 3 |
Viper 4 | 2 |
Cobra mk 3 | 3 |
Cobra mk 4 | 1 |
Krait phantom | 1 |
Krait mk 2 | 3 |
Vulture | 1 |
Python | 14 |
Anaconda | 11 |
Currently wanted in system due to more FF at installation....
Bit like CZs, pick a side, bit harder than Haz, as you tend to become the 'focus' of the opposition.How do you bounty hunt at installations?
As Flossy said, PProvart is the owner and driving force behind that site and the related EDMC plug-in. I have access to update the active CGs etc., but not the look & feel of the site so you'd need to contact him about that side of things.No worries, and thanks for all the info! BTW, are you the owner of the CGTThreshCalc site? If not, can you tell me the person's Forum name? I just want to respond to the request about improving the look of the site.