Optimal positioning of shield boosters on warships depending on the effect applied to the main shield.
Instruction :
1. Choose the ship we need (any).
2. Place on it the shield we need, the class and type we need.
3. We'll apply the engineer's modification to this shield.
(Since the ship is designed without evading the battle, it will be one of the 2 main effects: the volume or heat resistance).
4. Select the required number of shield amplifiers from the table.
R - Resistance augmented
H - Heavy duty
K - Kinetic resistant
SC - Super capasitors
FB - Force block
TB - Thermal block
* If someone finds a more optimal arrangement, please inform this forum branch.
Instruction :
1. Choose the ship we need (any).
2. Place on it the shield we need, the class and type we need.
3. We'll apply the engineer's modification to this shield.
(Since the ship is designed without evading the battle, it will be one of the 2 main effects: the volume or heat resistance).
4. Select the required number of shield amplifiers from the table.
Shield / Booster | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
Rainforced | H/SC | T/SC | T/SC | H/SC | H/SC | H/SC | H/SC | R/TB |
Thermal | H/SC | H/SC | R/FB | R/FB | H/SC | R/FB | K/FB | H/SC |
H - Heavy duty
K - Kinetic resistant
SC - Super capasitors
FB - Force block
TB - Thermal block
* If someone finds a more optimal arrangement, please inform this forum branch.
( original page before discussion )
Sorry for my impudence, but for some reason I always see assemblies of different ships with different shields and different effects on shield amplifiers. Why is that?
I remember before, engineering effects were random and each had an individual module. But now it's the same.
If there isn't such a table yet, I'll probably have to do something similar (with time), but I think there is such a table already and you just have to put it out and that's all.
In fact, there are only 2 variants of the shield with volume and thermal protection.
(and it doesn't matter which prism shield it is or not).
(for example)
R - Resistance augmented
H - Heavy duty
K - Kinetic resistant
SC - Super capasitors
FB - Force block
If we have made modules and removed variations, why do we have to make different assemblies ?
P.S. Since the guard shield reinforcements are then superimposed, they can be neglected.
P.P.S. I'm not sure if the same 2 lines will work when cutting off the top cells. If not then you can add 7 more rows with fewer amplifiers to each line and that's it.
Sorry for my impudence, but for some reason I always see assemblies of different ships with different shields and different effects on shield amplifiers. Why is that?
I remember before, engineering effects were random and each had an individual module. But now it's the same.
If there isn't such a table yet, I'll probably have to do something similar (with time), but I think there is such a table already and you just have to put it out and that's all.
In fact, there are only 2 variants of the shield with volume and thermal protection.
(and it doesn't matter which prism shield it is or not).
(for example)
Shield / Booster | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | EXP | KIN | THR |
Rainforced | H/SC | T/SC | T/SC | H/SC | H/SC | H/SC | H/SC | R/TB | 56.9 | 48.3 | 40.0 |
H/SC | T/SC | T/SC | H/SC | H/SC | H/SC | H/SC | - | 48.1 | 37.8 | 34.3 | |
H/SC | T/SC | T/SC | H/SC | H/SC | H/SC | - | - | 49.1 | 39.0 | 34.9 | |
H/SC | T/SC | T/SC | H/SC | H/SC | - | - | - | 50.1 | 40.2 | 35.5 | |
H/SC | T/SC | T/SC | H/SC | - | - | - | - | 51.1 | 41.3 | 36.0 | |
H/SC | T/SC | T/SC | - | - | - | - | - | 52.1 | 42.5 | 36.6 | |
H/SC | T/SC | - | - | - | - | - | - | 54.8 | 45.8 | 23.9 | |
H/SC | - | - | - | - | - | - | - | 57.4 | 48.9 | -2.2 | |
Thermal | H/SC | H/SC | R/FB | R/FB | H/SC | R/FB | K/FB | H/SC | 66.4 | 59.8 | 59.7 |
H/SC | H/SC | R/FB | R/FB | H/SC | R/FB | K/FB | - | 66.7 | 60.1 | 60.1 | |
H/SC | H/SC | R/FB | R/FB | H/SC | R/FB | - | - | 67.3 | 54.2 | 60.8 | |
H/SC | H/SC | R/FB | R/FB | H/SC | - | - | - | 63.4 | 49.4 | 56.1 | |
H/SC | H/SC | R/FB | R/FB | - | - | - | - | 64.2 | 50.0 | 57.0 | |
H/SC | H/SC | R/FB | - | - | - | - | - | 56.8 | 39.1 | 48.2 | |
H/SC | H/SC | - | - | - | - | - | - | 48.0 | 25.1 | 37.6 | |
H/SC | - | - | - | - | - | - | - | 49.0 | 26.6 | 38.8 |
H - Heavy duty
K - Kinetic resistant
SC - Super capasitors
FB - Force block
If we have made modules and removed variations, why do we have to make different assemblies ?
P.S. Since the guard shield reinforcements are then superimposed, they can be neglected.
Last edited: