Mondays mid day update 1.659783421……Arrrggg!

[Thwarptide]

After an update we shouldn’t have fire up our ships let alone each and every one, and dink around to find out what works or what doesn’t.
I have 2 primary mission ships.
1. Krait 2. Prime Missio: Pew Pew
2. Krait Phantom. Prime mission: Land Based

After the update was complete I fired up the Phantom to complete a mission. Went to the destination and tried to do the DSS thing, NUT’n!
Turns out the Fire Groups board had been cleared of assignments. This happened on Thursdays update, but I was quickly able to reassign things.
But today all I could do was select the “Fire Groups“ Tab. I couldn’t select anything to assign. Seems ”ON THIS SHIP” I’ve been locked out of this. Everything else seemed fine.
BUT I WAS SERIOUSLY PUT OFF!

Back to station I climbed in the Krait 2. I didn’t fly it, but all systems seemed nominal.
Jumped in my Tritium hauler. No problems.
Here’s part of what was in the update as it applied
Fixes: Horizons (PC & Console)

• A stability issue encountered while cycling through Fire Groups was fixed

You can find more details here

Update 9.01 - Patch Notes

Greetings Commanders! At the time of this post (16:15 UTC), our servers have just gone offline while we roll out a hotfix. Downtime is expected to last approximately 30 minutes so feel free to check out which changes are coming while you wait: Fixes: Odyssey A stability issue encountered...

forums.frontier.co.uk

Apparently they fixed it for some Cmdrs, whereas I didn’t have the issue before, I do now. (Oh why don’t they like me)

 

[CMDR Stillgar [PS4]]

I can use stored modules again!! YAY!!

Fire groups FROZEN on some ships. esp. to do with Chaff and Heat sink modules.. whats the little 3 dots on a circle icon mean?

I pulled my Python and DBX out of storage and tried to switch some modules but I cant add to or change the fire groups!!

But my Krait Mkii was ok - could modify - the Krait was what I was in at the time of patch monday..

Fix one thing.. break another...

Can we have a stable console horizons builld for Christmas plz Santa?

plz plz

 

[Frogrjb]

I have found that if your fire groups get stuck you have to add a weapon to the ship then set your fire groups then remove the weapon but once you remove the weapon fire groups will again become frozen but you do have your fire groups that you set. Its no good if you can not get to a station or carrier. But the patch has not worked.

 

[Miko]

After an update we shouldn’t have fire up our ships let alone each and every one, and dink around to find out what works or what doesn’t.
I have 2 primary mission ships.
1. Krait 2. Prime Missio: Pew Pew
2. Krait Phantom. Prime mission: Land Based

After the update was complete I fired up the Phantom to complete a mission. Went to the destination and tried to do the DSS thing, NUT’n!
Turns out the Fire Groups board had been cleared of assignments. This happened on Thursdays update, but I was quickly able to reassign things.
But today all I could do was select the “Fire Groups“ Tab. I couldn’t select anything to assign. Seems ”ON THIS SHIP” I’ve been locked out of this. Everything else seemed fine.
BUT I WAS SERIOUSLY PUT OFF!

Back to station I climbed in the Krait 2. I didn’t fly it, but all systems seemed nominal.
Jumped in my Tritium hauler. No problems.
Here’s part of what was in the update as it applied
Fixes: Horizons (PC & Console)

• A stability issue encountered while cycling through Fire Groups was fixed

You can find more details here

Update 9.01 - Patch Notes

Greetings Commanders! At the time of this post (16:15 UTC), our servers have just gone offline while we roll out a hotfix. Downtime is expected to last approximately 30 minutes so feel free to check out which changes are coming while you wait: Fixes: Odyssey A stability issue encountered...

forums.frontier.co.uk

Apparently they fixed it for some Cmdrs, whereas I didn’t have the issue before, I do now. (Oh why don’t they like me)

Download your previous cloud settings save... Sorted.

 

[Thwarptide]

Doh!
Why didn’t I think of that!
(DON’T YOU DARE ANSWER THAT EITHER)

 

[Speedcuffs]

I can use stored modules again!! YAY!!

Fire groups FROZEN on some ships. esp. to do with Chaff and Heat sink modules.. whats the little 3 dots on a circle icon mean?

I pulled my Python and DBX out of storage and tried to switch some modules but I cant add to or change the fire groups!!

But my Krait Mkii was ok - could modify - the Krait was what I was in at the time of patch monday..

Fix one thing.. break another...

Can we have a stable console horizons builld for Christmas plz Santa?

plz plz

Does the 3 circles thing mean you have them assigned to a separate button?

 

[Thwarptide]

3 circles? You Have A, B (cdef (how many groups you want.
the circle’s below are to select the weapon’s or other tools you require at the moment. You can switch between groups.
but each tool in that group has one button assignment. 1 or 2 (R1 and L1) You can tweek the button you want to use at game settings.