Found, the double entry resulting from the error.
Last edited:
- Status
Found, the double entry resulting from the error.
Whats wrong? The distance at "LAWD 8"? Its not, because you visit an unknown star system, TCE cant calculate the exact distance from unknown star systems. Please record the unknown and you will see the exact distance. If you didnt record the unknown star system, TCE checks the distance from the last known.
Found and fixed.
Last edited:
Eventure it has been a hell of a week for you hasn't it? 
I just wanted to say THANK YOU for all that you have been doing to try and get the latest bugs and errors out of TCE. I have installed Beta 5 Test 4 though I haven't had the time to try it out yet, but I am so impressed with you diligence that regardless of the outcome, I just wanted to send you my sincerest gratitude's
I just wanted to say THANK YOU for all that you have been doing to try and get the latest bugs and errors out of TCE. I have installed Beta 5 Test 4 though I haven't had the time to try it out yet, but I am so impressed with you diligence that regardless of the outcome, I just wanted to send you my sincerest gratitude'sUpdate (V1.41 Beta 6) released:
Changelog:
- Changed all date format routines from "dd.mm.yyyy" to "dd/mm/yyyy" because of localization issues.
- Added dropdown to Commodity panel, to select the category. Click at the category name text to open it.
- Changed alternativ panel display mode to standard. You can change it back to old mode at the Options panel.
- Fixed "Set as Destination" at the Stored Locations panel.
- Fixed filtering in Select Destination panel.
- Fixed scrollbar in Stored Loactions, if no entry selected.
- Full-Version 1.40 installer: http://bit.ly/1BKys2l
- Full-Version 1.40 non-installer: http://bit.ly/1G6bZ4X
- Update 1.41 Beta 6: http://bit.ly/1dmASy0 (Full-Version V1.40 required)
Changelog:
- Changed all date format routines from "dd.mm.yyyy" to "dd/mm/yyyy" because of localization issues.
- Added dropdown to Commodity panel, to select the category. Click at the category name text to open it.
- Changed alternativ panel display mode to standard. You can change it back to old mode at the Options panel.
- Fixed "Set as Destination" at the Stored Locations panel.
- Fixed filtering in Select Destination panel.
- Fixed scrollbar in Stored Loactions, if no entry selected.
Last edited:
TCE crashed and wouldn't close when I tried to get you the screenshot, rebooted and reloaded and while at a another new station no error happened. Will feedback if you happens again.
Thanks.
with the new panel display mode, the panels are cut off:
View attachment 42154
old display mode working as intended.
- - - Updated - - -
after clicking 'select as destination' in the logbook, stored outfitting locations, excel crashed.
no debug, just 'stopped working' and in need of a restart.
OK so far the only thing I have come up with is your TCE Logo is displaying off center and to the left upon starting and while trying to scan commodities I get this
https://www.dropbox.com/s/8qrrs3xkcyz2pb0/Screenshot 2015-06-07 07.23.05.png?dl=0
Could have something to do with the added commodities I don't know seems to hang once it gets to SAP 8 CORE CONTAINER
On Beta 4 Test 5
Will get 6 now
https://www.dropbox.com/s/8qrrs3xkcyz2pb0/Screenshot 2015-06-07 07.23.05.png?dl=0
Could have something to do with the added commodities I don't know seems to hang once it gets to SAP 8 CORE CONTAINER
On Beta 4 Test 5
Will get 6 now
Last edited:
Thanks for posting the screenshot. Please tell me your resolution, to be sure i fix the issue. Thanks.
- - - Updated - - -
Hmm.... not here, please upload you database and tell me, what station you selected. Also check, if you cant set the destination from blackmarkets and shipyards too.
I have been using TCE fine without an issue until I just updated. I ended up deleting everything in TCE and doing a clean install. That fixed it. Thanks anyway.
I moved the logo for the beta, in case of start errors. Full-Version is centered again.
Did you added the SAP 8 to the salvage category?
Last edited:
Eventure it has been a hell of a week for you hasn't it?
I would like to second that motion. One round of applause for Eventure.
Perhaps you can upload your last database backup to let me check, where the problem is.
Eventure it has been a hell of a week for you hasn't it?I just wanted to say THANK YOU for all that you have been doing to try and get the latest bugs and errors out of TCE. I have installed Beta 5 Test 4 though I haven't had the time to try it out yet, but I am so impressed with you diligence that regardless of the outcome, I just wanted to send you my sincerest gratitude's
Thanks for your kind words. TCE getting really big, now it has more than 35k codelines, excel worksheets not included. I dont know, where the limit of excel is, but i think, we comming closer.
Last edited:
5760*1080, triple mon.
i noticed the loading screen is centered no more, its only half-visible, far out of the left side of left monitor.
setting a destination out of the logbook doesn't work at all (for me).
clicking it does nothing, target does not matter. i tried it in outfitting + shipyards.
after a few more clicks in the logbook, excel hung up. no error message.
sending link to db per pm.
RUNNING 1.41 Beta 6
Ok went through my commodities and found 2 references to the SAP 8 CONTAINER in the db deleted 1 and ran scan and got this,
https://www.dropbox.com/s/c2gshnhh58c6urs/Screenshot 2015-06-07 07.48.23.png?dl=0
Also I too can confirm clipping of the panels in the new interface choosing the old option corrects the clipping issue.
Ok went through my commodities and found 2 references to the SAP 8 CONTAINER in the db deleted 1 and ran scan and got this,
https://www.dropbox.com/s/c2gshnhh58c6urs/Screenshot 2015-06-07 07.48.23.png?dl=0
Also I too can confirm clipping of the panels in the new interface choosing the old option corrects the clipping issue.
Hi !
Just to add a little feedback for BETA 5 TEST 4.
I finally managed to understand why I had this Error :
I used decimal number when entering distance. If I use absolute number, the error doesn't appear.^^ My fault.
No other errors appeared but I have differences in date format :
The Current Station Panel indicates the french format (wich is good for me as i'm french ) dd/mm/yyyy
The Travel Logbook still indicates the mm/dd/yyyy format and the last year number is truncated (330 in place of 3301). But i don't really care^^. My screen resolution is 1920*1080.
I noticed too that when TCE is running, I can't open a .csv file.
Many many thanks again for your hard job Eventure. I really appreciated the addition of star class and scoopable indication. I love the shipyard list too ! I hope you plan to later implement a research based on ship model. Would be awesome !
Just to add a little feedback for BETA 5 TEST 4.
I finally managed to understand why I had this Error :
I used decimal number when entering distance. If I use absolute number, the error doesn't appear.^^ My fault.
No other errors appeared but I have differences in date format :
The Current Station Panel indicates the french format (wich is good for me as i'm french
) dd/mm/yyyyThe Travel Logbook still indicates the mm/dd/yyyy format and the last year number is truncated (330 in place of 3301). But i don't really care^^. My screen resolution is 1920*1080.
I noticed too that when TCE is running, I can't open a .csv file.
Many many thanks again for your hard job Eventure. I really appreciated the addition of star class and scoopable indication. I love the shipyard list too ! I hope you plan to later implement a research based on ship model. Would be awesome !
Yes I screwed up at first and modified entries when trying to add wiped out SCRAP but I have fixed that and I have gone in and confirm in the DB the new entries but here is my DB if you want to look it over
https://www.dropbox.com/s/9sexx0jjbmbhsa6/TCE.mdb?dl=0
- - - Updated - - -
Nice to know I too might have been making that error
Your most welcome of course, as to limits on macros
http://excel.tips.net/T003174_Maximum_Length_Limit_for_a_Macro.html
I guess 64k of compiled code is it
- - - Updated - - -
For cut off panels go into options and select the old panel option.
Working ! Thanks for the tip !
- Status