Horizons Voice attack and panels

Here's what it should look like, the window on the far right 'Edit a Keypress' is what you will see after double clicking the command

286zjib.png
 
Sorry, a simple I don't understand would suffice. ;) 777Driver knows more than I do anyway.

For the record I was suggesting to create a new command for the left panel within the profile you already have setup, that way you might remove the problems. :)

Hope you get it fixed!
You're right. Sorry:) But I'm sure you know how it is when you trying to do something, spending few hours on trying to understand how this thing works, tinkering with it and although

this should work, it doesn't. You're right, I just don't understand:)
Sorry again:)
 
Hi
I have problem with the VA that I don't know how to handle. It's about left, right and comms panel in the ship.
When I've got VA on and say "left panel" nothing happens. Even pressing key 1 don't do anything. The same is with "right panel" and comms. Now I can see in VA window that software recognize command as it displays "recognized left panel" and so on, but nothing happens. When I turn off VA, then pressing key bind to the command works
This is what I have in my VA->keybindings->((left panel)) and Voice Attack edit profile window - [url]http://s32.postimg.org/ujnaeimap/2016_05_01_16_23_13_Program_Manager.jpg[/url]
Can you help me please. What should I do to be able to access panels in my ship just by saying left, right or comms panel? It is on after all. Isn't it?

Sounds to me like your in game bindings are set wrong. Go to controls and reset focus on left panel by actually speaking the command when ED asks for it.
 
So just to be clear for me. It's not wrong?
I didn't changet this at all.


If when in Elite you press 1 on the keyboard and left panel appears, then that side is correct. The problem will lie externally to Elite.

You can double check by going into Options/Controls/*Scroll Down*/Mode Switches and see what Target Panel is bound to in game. By default it is [1]
 
In that case, the mind boggles as to how it could take nearly two pages to sort out.

For a start the Op hasn't posted the page showing key input method, he's been asked three times (starting with post 6). It may not be the solution, but it rules out 90% of these issues.
 
Last edited:
For a start the Op hasn't posted the page showing key input method, he's been asked three times (starting with post 6). It may not be the solution, but it rules out 90% of these issues.


I was? Ok, if so that's my bad, but.... wait, I've got no idea how to do that. I do have software to make screenshots, but it works in Windows. How to do it in game?
 
I was? Ok, if so that's my bad, but.... wait, I've got no idea how to do that. I do have software to make screenshots, but it works in Windows. How to do it in game?

Windows key+ print screen (Located above insert, delete. In Between main keyboard and Num keyboard). That will take a screenshot of everything on screen, including the windows opened that 777Driver was requesting. It will save a file in pictures/screenshots.

- - - - - Additional Content Posted / Auto Merge - - - - -

Incidentally, 777Driver, is there any way you have found to remove the lag from the commands in VA?
 
I was? Ok, if so that's my bad, but.... wait, I've got no idea how to do that. I do have software to make screenshots, but it works in Windows. How to do it in game?

Ok, forget taking a screenshot - Check my post #21, look at the far right window that is open, half way down it says 'Key input Method' make sure you have Direct x selected as shown in the screenshot.

That is the first thing you should check before troubleshooting anything else.
 
Last edited:
I just installed VA, setup a command for left panel, works fine.

Follow this..

jpg
Ok, but is this in keybinding section? or left panel section? or panel switching section?
Here is how all those 3 sections look like in my VA


- - - - - Additional Content Posted / Auto Merge - - - - -

Ok, forget taking a screenshot - Check my post #21, look at the far right window that is open, half way down it says 'Key input Method' make sure you have Direct x selected as shown in the screenshot.

That is the first thing you should check before troubleshooting anything else.


Yes I do have checked that. I've been told to check for that before so I do look at it and yes, I do have checked Direct x
 
Ok, but is this in keybinding section? or left panel section? or panel switching section?
Here is how all those 3 sections look like in my VA
[url]http://s20.postimg.org/l03pbzaeh/2016_05_01_20_12_26_Voice_Attack_Command.jpg[/url] [url]http://s20.postimg.org/3o3cqjgx5/2016_05_01_20_13_41_Voice_Attack_Command.jpg[/url] [url]http://s20.postimg.org/m4xrhcwvd/2016_05_01_20_14_27_Voice_Attack_Command.jpg[/url]

- - - - - Additional Content Posted / Auto Merge - - - - -




Yes I do have checked that. I've been told to check for that before so I do look at it and yes, I do have checked Direct x

Jeez, who set this up? This is why I build my own profiles. The command is linked to conditions, if you bought this from the guy who created the A.S.T.R.A voice packs, it's best to send him an email.

He's very helpful, what I did was purchased the sound files and then built my own profile.

http://hcsvoicepacks.com/products/astra
 
Simple fix for now,

Add new command.

image.jpg

Type in voice command you would like.


image.jpg

Left mouse button keypress.

image.jpg

Close down the tips side panel first, and press 1 on the keyboard.

image.jpg

AFAIK that should work...
 
Last edited:
Jeez, who set this up? This is why I build my own profiles. The command is linked to conditions, if you bought this from the guy who created the A.S.T.R.A voice packs, it's best to send him an email.

He's very helpful, what I did was purchased the sound files and then built my own profile.

http://hcsvoicepacks.com/products/astra
All I did was enable the command and that's it. When you see I.E. next to command look ahead word disabled, all I did was to get rid of it and that's all. I didn't changed anything else. I did bought voicepack from this site, it was just ORION voice pack.

- - - - - Additional Content Posted / Auto Merge - - - - -

Simple fix for now,

Add new command...

AFAIK that should work...

Thx for the suggestion but it's no can do. When I try to do that, this come up when I hit ok button
 
Thx for the suggestion but it's no can do. When I try to do that, this come up when I hit ok button [url]http://s20.postimg.org/xwlms5rhl/2016_05_01_20_50_00_Command_Spoken_Phrase_Alread.jpg[/url]

That happens because you already have a command with the same spoken phrase, you can get around it by editing the original command.

Anyway, final shot in the dark. Try adjusting the key press time to something higher than 0.003 seconds. I edited my command to match yours, result was the panel wouldn't open, when I changed it back to 0.033 seconds it worked normally.

Your best best is to contact the guy froms HCS packs, he'll get back to quickly.
 
Last edited:
All I did was enable the command and that's it. When you see I.E. next to command look ahead word disabled, all I did was to get rid of it and that's all. I didn't changed anything else. I did bought voicepack from this site, it was just ORION voice pack.

- - - - - Additional Content Posted / Auto Merge - - - - -



Thx for the suggestion but it's no can do. When I try to do that, this come up when I hit ok button http://s20.postimg.org/xwlms5rhl/2016_05_01_20_50_00_Command_Spoken_Phrase_Alread.jpg

Yeah, edit the old one (not suggested, as we want to remove the problem), Delete the old one (Probably not a good idea, I don't want to be blamed for breaking it), put a new vocal command in, 'test panel' instead of 'left panel'. Try it in elite, if it works then we have troubleshooted it...
 
Have no idea what's going on. Just added this test panel command as suggested, didn't even said - test panel to the mic but thought to try again saying left panel, and it works. I don't know how but it works. Game displays left panel when I say it and right panel as well.
Ok, thx all tor the help:)

- - - - - Additional Content Posted / Auto Merge - - - - -

I didn't changed literary anything. just added this test command.
 
Back
Top Bottom