The Voiceattack Discussion Thread

There is also another trick. Open up Microsoft's speech dictionary and add a word manually or you can prevent a word being recognized. Very handy.
 
There is also another trick. Open up Microsoft's speech dictionary and add a word manually or you can prevent a word being recognized. Very handy.
I bought VoiceAttack! yesterday. I then spent a little while setting it all up. I then realised that for single button press commands it's not much use. Just a gimmick really.

But for multi-button presses! It contains all the Win!

Now, where is this speech dictionary of which you tell?
 
You can use the VoiceAttack main panel to see what it thinks you are saying.

Like the 'Speed' 'Spend' example someone gave above.
If you say 'Speed' a couple of times and you keep getting - Unrecognized 'Spend'

Go to Edit mode and edit your 'Speed' command so it shows this:

When I say: Speed;Spend
(note there are no spaces between the words and the semicolon)

This will assign both words to that command.
It will then update your list of commands to the following
Speed(multipart)
Spend(multipart)


Please accept some positive rep for imparting some info that I can use. Thank you
 
ED Not Responding to Commands

I'm trying to set up Voice Attack, Have followed all instructions, Voice Attack is working, Its recognising my commands and sending the specified keybinds.

However ED is not responding to the keybinds.

Voice Attack is set to run as administrator, have tried using active window and sending keys direct to ED Client with no effect.

I can send keys to notepad and it will respond by typing the keys sent.

But ED seems to be completely ignoring them.

Any help appreciated

Thanks.
 
I'm trying to set up Voice Attack, Have followed all instructions, Voice Attack is working, Its recognising my commands and sending the specified keybinds.

However ED is not responding to the keybinds.

Voice Attack is set to run as administrator, have tried using active window and sending keys direct to ED Client with no effect.

I can send keys to notepad and it will respond by typing the keys sent.

But ED seems to be completely ignoring them.

Any help appreciated

Thanks.
There is a radio button in the settings somewhere to change how the keys are sent. Mine was DX by default (I think it was DX). Have you tried that?
 
I bought VoiceAttack! yesterday. I then spent a little while setting it all up. I then realised that for single button press commands it's not much use. Just a gimmick really.

My view is that removing hands from Joystick/throttle to the keyboard is needless with VA, plus I am seriously considering Oculus Rift then it gets to consumer version. VA will be awesome then.

Please accept some positive rep for imparting some info that I can use. Thank you
Many thanks, I am glad I was able to help.

I'm trying to set up Voice Attack, Have followed all instructions, Voice Attack is working, Its recognising my commands and sending the specified keybinds.

However ED is not responding to the keybinds.

I think I had to increase the press time to 0.2 sec when i set mine up. (will double check when i get home)

Also, double check that your key choices are actually set to the function you want in Elite's Control mapping list.
 
Last edited:
There is a radio button in the settings somewhere to change how the keys are sent. Mine was DX by default (I think it was DX). Have you tried that?

Pretty sure I have tried both methods, will double check if and when im able to login to ED again, right now I just keep getting "Unexpected server Error: LengthRequired"
 
My view is that removing hands from Joystick/throttle to the keyboard is needless with VA, plus I am seriously considering Oculus Rift then it gets to consumer version. VA will be awesome then.
I agree that, with the Rift, using the keyboard will be difficult, but without it VA is just so much slower for navigating the side panels. Don't get me wrong, I am lovin' it, lovin' it, lovin' it.
 
Ben,
I had a similar issue and it turned out that my Mic output was to low, you can see in VA in the lower part of its window if its picking up your voice.

Another thing to check, VA has two input modes for key presses : Standard and DirectX. Try alternating between these two modes.

I'm trying to set up Voice Attack, Have followed all instructions, Voice Attack is working, Its recognising my commands and sending the specified keybinds.

However ED is not responding to the keybinds.

Voice Attack is set to run as administrator, have tried using active window and sending keys direct to ED Client with no effect.

I can send keys to notepad and it will respond by typing the keys sent.

But ED seems to be completely ignoring them.

Any help appreciated

Thanks.
 
I agree that, with the Rift, using the keyboard will be difficult, but without it VA is just so much slower for navigating the side panels. Don't get me wrong, I am lovin' it, lovin' it, lovin' it.

I currently use the Joystick 'Hat thing' and trigger for the side panels so that isn't an issue for me at the moment. But i do VA to get to the side panels.

However: I hear that lateral thrusters mapped to the joystik 'hat' is a good option for dogfighting, so I may have to readdress my control/VA choices.
 
Fixed

There is a radio button in the settings somewhere to change how the keys are sent. Mine was DX by default (I think it was DX). Have you tried that?

Ok the dx mode did the trick, all is working. strange, I'm sure I tried that already.

All I need now is a keybind to request docking to the station im aproaching:)

Many Thanks
 
thanks all for the help

the voice training definitely made a difference - the word it doesn't seem to like for me is "weapons" which is rather crucial :)

will have another run through the voice training and practice a bit more

HOWEVER - i have decided that my mic is indeed a pile of crap - so would welcome any suggestions for a good quality mike/headset combo

cheers

doc

There's a touch of Pavel Chekov about you :) Varp Speed, Veapons. Just don't try copying his superb "Pavel Chekov authorisation code 9-5-Wiktor-Wiktor-2".
 
The LenghtRequired error was from The ED server while trying to login to ED, not from VoiceAttack.

All is working now

Thanks
Glad you got there in the end.

I am considering trying a "Request Docking" halfway house, myself. As it stands VoiceAttack doesn't know where you will be in a side panel, so can't macro to the "Request Docking" option. But, if you get as far as highlighting the station, "Select - Down - Select" should request docking clearance, and then you gets to say "Hello, Is it me you're looking for?" or whatever floats your 'Bra.

Will be giving this a go laters.
 
I've seen a feature request for a 'Request Docking (from currently locked station)' keybind.

This would be awesome for VA and i hope the Devs give it some thought.
 
It may also be of some help that VA recognises phonetic spelling too which is useful if you have an accent. So you can enter commands like this;

When I say: Shields;Sheeelds
or
When I say:Landing gear;Landing Geer;Landing Gia​

Remember, VA is listening not for what you say, but how you say it, so if you examine how you actually say different phrases phonetically you can improve VA's hit rate at understanding you. It really worked for me.

Hope that helps :)
 
Last edited:
Back
Top Bottom