Elite Dangerous: Odyssey Update 5

Status
Thread Closed: Not open for further replies.
Right now the mission board doesn't seem to show any. I know some people have said they've still found some - where? I might go see if I can see them too.
I went around 5 or 6 systems where I had being doing the restore missions saw 0

Took a jump 100ly away that had leveled most of my empire faction in and found 0 there as well.
 
I went around 5 or 6 systems where I had being doing the restore missions saw 0

Took a jump 100ly away that had leveled most of my empire faction in and found 0 there as well.
1625419151853.png


1625419176141.png
 
Excuse me.
Has anyone been able to complete a wolf mission with a level of red 5?
I have no problem doing the mission blue 4, but as soon as I arrive at the settlement where the level of red 5, there is no marking on the right that you need to insert the regulator, and after installing the regulator and turning on the energy no fire counter ...
What am I doing wrong? Such I have a third mission :(
HaEHV5k.png
There are three ships hovering motionless in the air.
WL02Xal.png
 
Last edited:
Excuse me.
Has anyone been able to complete a wolf mission with a level of red 5?
I have no problem doing the mission blue 4, but as soon as I arrive at the settlement where the level of red 5, there is no marking on the right that you need to insert the regulator, and after installing the regulator and turning on the energy no fire counter ...
What am I doing wrong? Such I have a third mission :(
HaEHV5k.png

Had seen that at a location before, think its either a bugged location or mission.
Can try take mission again and if the same then best option would add it to issue tracker with as much information as possible (location/ settlement etc)
But currently there have been reported issues with the restore missions if you can find them.
 
Had seen that at a location before, think its either a bugged location or mission.
Can try take mission again and if the same then best option would add it to issue tracker with as much information as possible (location/ settlement etc)
But currently there have been reported issues with the restore missions if you can find them.
This is the 3rd mission like this, in different systems and different settlements, the only thing they have in common is threat level 5 red.

And why during these missions blue marked not only the settlement and the planet itself?
Maybe something should be done with the planet?
T6ykxgr.png

But the light came off the SRV and hung in the air, but there is another one in the SRV :)
vwtkCyx.png

P.S. Welcome to EB (Elite Bugs)
 
Last edited:
I had a random bug last night. Not seen it mentioned before. Will be putting it in the tracker.

As I headed to my ship on foot (in a station), heading to the blue transport ring, I noticed something odd. The ring wasn’t in its normal orientation. It was on a slant. As I approached the ring started to move and pulse, then tipped sideways and flew through the wall of the hanger!!

I could still enter ship as normal and take off. If I stood where the ring should be. So had no issues on game play.

it was just weird
 
Went there myself to look.
View attachment 247364
Nada.

Checked the "all" category in case it was just my lack of reputation here stopping them from showing as available, but no. Plenty of locked out settlement raids, but no restores.
As you in same situation seem to be having

did find one at Noli Gateway Pancienses, completed it then message board showed same one again
this was couple hours ago.

Had logged out and back in at that station a few times over a few hours since yesterday,
but support missions only showed up on last login, went back to other system had been trying and still no support missions.

there does seem to be an issue with the no of restore missions available since update 5
 
Went to Sitakapa itself, finally see one. Not for the settlement in Sitakapa but for one in Wasenenbi, estimated at a mere 450k ls from the arrival point. I think it's trying to tell me something.
 
The restore missions are in game, but much rarer than before.
Maybe because in Patch 5 only the owning faction can ask for a restore instead of basically everyone else?
 
The restore missions are in game, but much rarer than before.
Maybe because in Patch 5 only the owning faction can ask for a restore instead of basically everyone else?
Think problem has they have become too rare,

pre update 5 at location was using would have 4 or 5 restore missions to different locations (there were multiple missions to each location as well)
but now see 0 at this location, and has been same since update 5 released.

So either the settlements have suddenly become more reliable or there is an issue with the missions being created.
 
"Cannot complete support (Repair) missions with fires"

This is the top most voted for, confirmed bug on the Odyssey issue tracker.
Until this is fixed I am not even looking at Repair/Restore missions.
 
Still no fix then for miners eh like fixing the laser mining problem thats been going since horizons patch 1 after you adjusted it so it doesnt spawn mats in hotspots in favour for deep core. We should at least get upto 20% on regular laser mining with mats in rocks in hotspots instead of being pushed into deep core for effects.

Right now its a waste of time even exploring to find new pristine mining ground if laser mining is a no go. You are also going to loose out on cmdr exploration data too as a result.

This is a long waited fix but then again its not combat is it so very low on you're priorities considering you've had plenty of support and bug tickets about this already over the years by the mining community and have done nothing about it to date. Right now you seem to be fixing almost everything else but the mining issues so thank you for that. Shouldnt take that long to fix and adjust generation and spawn rates of mats in hotspots without deep core.

So why havent you done it yet because nobody has had a valid reason why in support tickets or bugs. Its like you have completely avoided the subject on purpose.
 
Last edited:
It's unreal after 5 patches we still have issues like this.
Popup graphics when approach a planet or moon.

Source: https://www.youtube.com/watch?v=MJSV4xAgwwg


Extremely terrible low resolution getting "better" as you approach.
And the best part... we can even submit the issue.
1625441935873.png


It's unreal after 5 patches we still have issues like this.
Popup graphics when approach a planet or moon.

Source: https://www.youtube.com/watch?v=MJSV4xAgwwg



Extremely terrible low resolution getting "better" as you approach.
 
Last edited:
I cant imagin that v-sync is a prob. Will test this...
Doesn´t solve the issue for me...

@sallymorganmoore
I´m still waiting for your communication to us! We need feedback if the issue is on the FEDV Team radar and when we get a hotfix.

We have a thraed full of feedback:


And an issue tracker as well:


Cmon please more communication to your community!
 
Doesn´t solve the issue for me...

@sallymorganmoore
I´m still waiting for your communication to us! We need feedback if the issue is on the FEDV Team radar and when we get a hotfix.

We have a thraed full of feedback:


And an issue tracker as well:


Cmon please more communication to your community!
Just accept it. FD doesn't care at all!
 
Status
Thread Closed: Not open for further replies.
Back
Top Bottom