This is sort of what the dead zone is - how far you need to push the stick before it registers. It's useful (on some joysticks) where they don't always centre exactly to stop drift, but the DS4 joysticks don't need as much as is configured.Is there any way to adjust DS4 analog stick (L3 and R3) sensitivity?
This is sort of what the dead zone is - how far you need to push the stick before it registers. It's useful (on some joysticks) where they don't always centre exactly to stop drift, but the DS4 joysticks don't need as much as is configured.
I don't think there's any way to change the gain on the joysticks - I'm pretty sure once you're out of the dead-zone, it's linear.
Certainly being able to quickly select 75% throttle is a very good idea. That's the optimum setting for the 7 second rule in supercruise.
What is the 7 second rule?
I found a few minor tweaks have transformed the controls for me but I am finding the overall control setup to be amazing, and the headlook is perfect on the sixaxis.
All I did was put pitch/yaw on the left stick, and Vertical thrusters/roll on the right stick. I mapped throttle 0% to L1+R1 (a great emergency handbrake) and I turned off that annoying roll into yaw.
When you are 7 seconds away from the place you're heading to, set your throttle to 75 or 50% so you don't overshoot it and have to loop back around.
The ability to save and share control bindings should be a thing.
Make it so FD,let the players set the optimum setup with our hive mind.
Because out of the box the controls just aren't right.
Need addition HUD buttons for L2 and R2, like now with L1 and R1, so when you holding modifier key, binds for L2 and R2 will appear in the bottom part.