DS4 on PC severe "drift"

[Da9el]

So I´ve recently remapped from my HOTAS to a DS4 controller since I don´t want to bring my entire setup with me on travels for the weekend. However, what I quickly noticed as I started playing, is that my ships seem to pull quite a bit down and slightly to the right.

This is actually so severe that if I line up on a system and start charging my FSD for a high wake, by the time the charging is done, I´ll have to realign the ship unless I´m constantly adjusting it. I´ve also checked the readings from both sticks in the DS4Windows program, but they don´t seem to have any readouts unless touched. It is neither a problem in other games for which I use the exact same setup.

Anybody experienced this or have any fix ideas?

o7

 

[Kingston@#]

re calibrate your controls.
open search and search for game controllers. open setup usb GC. high light GC and hit properties, settings, calibrate. then calibrate your controller.

 

[Urbanski101]

I use an xbox controller and I get drift.

I set the axis deadzones to about 10% on the alternate flight control setting and toggle that when I log in.

The minute I switch to alternate flight controls the problem goes away.

 

[Kingston@#]

i had an issue. seemed to me when i plugged in controller axis's were not central. installed with the AXIS slightly off, after re calibrating issue was solved.

 

[Da9el]

i had an issue. seemed to me when i plugged in controller axis's were not central. installed with the AXIS slightly off, after re calibrating issue was solved.

I use an xbox controller and I get drift.

I set the axis deadzones to about 10% on the alternate flight control setting and toggle that when I log in.

The minute I switch to alternate flight controls the problem goes away.

re calibrate your controls.
open search and search for game controllers. open setup usb GC. high light GC and hit properties, settings, calibrate. then calibrate your controller.

Worked like a charm, thanks guys! o7