Help with bindings for please

V3teran

V3teran
Need some help please guys, I installed windows 10 and installed the game and copied my joystick bindings over and it's not working. My custom colour cockpit is working but bindings are not. Are there 2 places for the bindings to go? When I open up the custom binding I can see that my joystick is mapped....any help would be much appreciated as I can't be remapping my joystick controls again as there's to many on the hotas etc please help
 

V3teran

V3teran
Fixed it, the problem was with windows 10, as soon as i rolled back to win 7 all was working ok again.
 

FoxTwo

FoxTwo
Win 10 might have seen the stick as a different ID. The bindings file could be referring to the original ID, which is different from what Win 10 sees. If you could have manually edited the bindings file you might have fixed it for Win 10 without rolling back.

Eg in mine:

Code: 
<RollAxisRaw>
		<Binding Device="SaitekX52Pro" Key="Joy_XAxis" />
		<Inverted Value="0" />
		<Deadzone Value="0.00000000" />
	</RollAxisRaw>

Maybe Win 7 and Win 10 refers to the stick with a different name. In Win 10 it's "SaitekX52Pro" but in Win 7 it may be something else. If you could edit it so that it reads as a Win 10 recognised name it may have fixed it.
 
Last edited:

SMcA

SMcA
FoxTwo said:
Win 10 might have seen the stick as a different ID. The bindings file could be referring to the original ID, which is different from what Win 10 sees. If you could have manually edited the bindings file you might have fixed it for Win 10 without rolling back.

Eg in mine:

Code: 
<RollAxisRaw>
        <Binding Device="SaitekX52Pro" Key="Joy_XAxis" />
        <Inverted Value="0" />
        <Deadzone Value="0.00000000" />
    </RollAxisRaw>

Maybe Win 7 and Win 10 refers to the stick with a different name. In Win 10 it's "SaitekX52Pro" but in Win 7 it may be something else. If you could edit it so that it reads as a Win 10 recognised name it may have fixed it.
Click to expand...

I just checked in Win 7 64 bit. It is Device="SaitekX52Pro".

In Elite controls, first line, check the name of the preset that is loaded. Then in %username%\AppData\Local\Frontier Developments\Elite Dangerous\Options\Bindings
check the bindings file. Also in the same directory look at StartPreset.start That tells ED which bindings file to use.
 

V3teran

V3teran
SMcA said:
I just checked in Win 7 64 bit. It is Device="SaitekX52Pro".

In Elite controls, first line, check the name of the preset that is loaded. Then in %username%\AppData\Local\Frontier Developments\Elite Dangerous\Options\Bindings
check the bindings file. Also in the same directory look at StartPreset.start That tells ED which bindings file to use.
Click to expand...

Thanks for that, but im back on windows 7 now so alls good thanks though.
 

V3teran

V3teran
If there stored differently then were are they stored? I tried every location and still did t work &#55357;&#56898;
 

amcb10

amcb10
Sorry Im not at work at the moment but go back to Win 10, start the game and create a custom binds file (modify some control or setting on one of the default ones in game).

Remember what you called it and locate where it is on the HDD (search), put your own binds file there and then select it at next start up.
 

Hossi

Hossi
V3teran said:
If there stored differently then were are they stored? I tried every location and still did t work ��
Click to expand...

Well, for me its
C:\Users\%YourUserName%\AppData\Local\Frontier Developments\Elite Dangerous\Options\Bindings
Just make sure that you dont have a copy of said config-file in the same folder. Took me weeks to figure out that this doesen't work as intended
 
Last edited:
You must log in or register to reply here.
Back
Top Bottom