- Status
V1.30 dev version didn't help either, my Start OCR Scan Button still does nothing but saying "Please wait..." and then after 2 seconds it just shows Start OCR Scan Button again.
The Commodity Panel while it says "Please wait..." switches to "Show All" and then immediatly back to "Show Station Based", that's all the Start OCR Button is doing.
No values are being updated in the community panel.
Checked the Preferences in EliteOCR and the Pathes were correctly set by TCE to the folders of TCE and the usual log folder.
Btw. i play at 1920x1200 Resolution, all graphics are set to MAX.
The Commodity Panel while it says "Please wait..." switches to "Show All" and then immediatly back to "Show Station Based", that's all the Start OCR Button is doing.
No values are being updated in the community panel.
Checked the Preferences in EliteOCR and the Pathes were correctly set by TCE to the folders of TCE and the usual log folder.
Btw. i play at 1920x1200 Resolution, all graphics are set to MAX.
Noticed an error.
Running v1.30 in 64 bit 2010.
Launched from a station and supercruised to another station 40ls away. My position was not updated within TCE and I can therefore not enter the new station into the database.
Jumping to a new system was also not updated, however TCE did update my position for the first station so I could enter those details.
I can select options within TCE panels, it has simply stopped seeing where i am.
Could it be that I run two monitors and I alt tab between Elite and firefox when jumping, landing, cruising to read forums and this is breaking TCE?
Just clicked exit and get a run-time error 1004
method ontime of object _application failed
Running v1.30 in 64 bit 2010.
Launched from a station and supercruised to another station 40ls away. My position was not updated within TCE and I can therefore not enter the new station into the database.
Jumping to a new system was also not updated, however TCE did update my position for the first station so I could enter those details.
I can select options within TCE panels, it has simply stopped seeing where i am.
Could it be that I run two monitors and I alt tab between Elite and firefox when jumping, landing, cruising to read forums and this is breaking TCE?
Just clicked exit and get a run-time error 1004
method ontime of object _application failed
Last edited:
'Alt tabbing should make no difference. Check so that your verbose logging is still correct.
My appconfig.xml has
<Network
VerboseLogging="1"
Port="0"
upnpenabled="1"
LogFile="netLog"
DatestampLog="1"
>
</Network>
ok then it's not that at least. I know my file got screwed up by something a few days ago.
I am getting the same?
If I start from scratch and reinstall again, will I lose all my data that I have entered?
Just missed a position change after ten successful ones. Can't say I was doing anything out of the ordinary when it stopped.
Restarting the TCE and it logged my position but the previous ten stations entered have been lost.
Still, it's a work in progress and I'm grateful for the efforts in making this.
Anyone else have this issue?
Full-Version and Update (V1.31) released:
-Code optimizations.
-Changed EXIT button to CONTROL, new button HIDE.
-Main panel orientation added (top or bottom).
-New ini file, Config.mdb can be deleted, ini file is created at start once.
-New Pre-Start Configuration panel for path selection. Now it is possible to auto-detect paths of NetLog, AppConfig and EliteOCR.
-Monitoring info of position detection added. Now, if you are in anyone panel, you got an info, that processing is paused. If you close all panels, processing continues. If TCE dont log your position anymore, if processing is paused or no info at all. It is at the top right corner.
-Small input box fix at the Station database panel
All data are at the backup folder, extract and copy the TCE.mdb back to the DB folder of TCE, after a full version install.
I added a monitor to the process display. If paused (when open a panel), it will be display at the right side. Your error comes, when the position scan routine was stopped. I will release a hotfix, so you can fire the routine again. I add a button to the Option panel. That bypasses the issue and i have time to check this problem and the issues Excel 2013 users are getting.
-Code optimizations.
-Changed EXIT button to CONTROL, new button HIDE.
-Main panel orientation added (top or bottom).
-New ini file, Config.mdb can be deleted, ini file is created at start once.
-New Pre-Start Configuration panel for path selection. Now it is possible to auto-detect paths of NetLog, AppConfig and EliteOCR.
-Monitoring info of position detection added. Now, if you are in anyone panel, you got an info, that processing is paused. If you close all panels, processing continues. If TCE dont log your position anymore, if processing is paused or no info at all. It is at the top right corner.
-Small input box fix at the Station database panel
All data are at the backup folder, extract and copy the TCE.mdb back to the DB folder of TCE, after a full version install.
I added a monitor to the process display. If paused (when open a panel), it will be display at the right side. Your error comes, when the position scan routine was stopped. I will release a hotfix, so you can fire the routine again. I add a button to the Option panel. That bypasses the issue and i have time to check this problem and the issues Excel 2013 users are getting.
Last edited:
Unfortunately I receive too many errors when trying to use this app. It no longer even launches, gets stuck on the 3rd dot and says subscript out of range. That combined with all the other errors I get make this unusable. Too bad, looks really great.
I just tried the 1.31 update, I can select the netlog and the eliteocr, but not the appconfig file folder, rendering this tool broken and unable to use. Autodetect only detected the first path, not any of the others.
Edit: I deleted and reinstalled TCE 1.31 from the installer package, and it still will not see the appconfig.xml. I select the ED installation folder, but nothing. Cannot manually type the name in that field either. I made sure that all files were unblocked, and that the trust center has the ED game location and TCE location in its trusted locations. It is now completely broken and unusable for me.
Edit**: Lol I finally got it to select all paths, and upon loading it crashed with run time error '9': subscript out of range. No idea what that means or how to fix it.
Edit: I deleted and reinstalled TCE 1.31 from the installer package, and it still will not see the appconfig.xml. I select the ED installation folder, but nothing. Cannot manually type the name in that field either. I made sure that all files were unblocked, and that the trust center has the ED game location and TCE location in its trusted locations. It is now completely broken and unusable for me.
Edit**: Lol I finally got it to select all paths, and upon loading it crashed with run time error '9': subscript out of range. No idea what that means or how to fix it.
Last edited:
Hi Eventure,
I have tried 1.31 and 1.31a. Both lock up and freeze when the TCE loading box comes up and the 2nd green dot lights up, it never gets to the 3rd green light. Previous versions worked fine for me over the last few nights.
Any ideas ? I am using excel 2007 btw
CMDR Flaxton
I have tried 1.31 and 1.31a. Both lock up and freeze when the TCE loading box comes up and the 2nd green dot lights up, it never gets to the 3rd green light. Previous versions worked fine for me over the last few nights.
Any ideas ? I am using excel 2007 btw
CMDR Flaxton
Restart TCE, and it is gone. I am looking into it.
Last edited:
Not even possible to select the paths...Why I can't even write it directly into the fields, when selecting with the explorer fails...
despite this: I discovered a bug in the Trade-tool-thingy (that, which suggests the best roundtrip...forgot the name, cuz of not working at all after update): it provides the second best roundtrip, not the best. I worked with another tool (Regulated Noise) side-by-side with TCE and found different roundtrip-prices. database of prices are the same, double-checked it.
When I look at the commodity-prices in the Tradetool, I find the the same suggestion for the roundtrip, but in the trade-roundtrip-thingy not.
despite this: I discovered a bug in the Trade-tool-thingy (that, which suggests the best roundtrip...forgot the name, cuz of not working at all after update): it provides the second best roundtrip, not the best. I worked with another tool (Regulated Noise) side-by-side with TCE and found different roundtrip-prices. database of prices are the same, double-checked it.
When I look at the commodity-prices in the Tradetool, I find the the same suggestion for the roundtrip, but in the trade-roundtrip-thingy not.
Last edited:
- Status