Is the option selected at the Options panel?
- Status
Is the option selected at the Options panel?
Can't set the hotkey in TCE Setup.xlsm or in the Option panel but when I set it manually in TCE.ini it works again !!!!
I love you !
having some crashing with the latest v1.38c Not sure whats going on. http://prntscr.com/6oc6cn
Hmm, as i see, it has to do with your position. Did you was at a recorded station before? What you did before?
You can select the station with the Position panel and then you enter the Commodity panel (look, that the station name is correct) and change the prices. Also you can edit it directly at the database. Check the Good ID for Bauxite and the station ID and look after them at the StationPrices table. I would do it the second way, because i use a newer version atm, where it is possible to change them through TCE for sure.
Last edited:
Also getting a lot of crashes, similiar to baals:
Has happened on the trade panel, the station panel, the position and destination panels, as well the trade station entry panel. Not all have been the same error or code, but I wasn't able to get screens of those. The one in the SS above happens when clicking the right arrow next to "add unregistered" on the trade station panel. All have been in Diso. Oddly enough, it seemed to work just fine in the frist two systems I used it in, Leesti and CD-34 9020, but I also was not going into all the same panels I was here in Diso.
After getting these a few times, I removed all the TCE files and re-installed (had only gone to two systems, wasn't concerned about losing anything), but it continued to happen. I'm going to remove/re-install again and work off the base 1.38 spreadsheet instead of 1.38c and see if that makes a difference.
edit: 1.38 vs 1.38c doesn't matter, same error - this particular one seems to be happening because I'm clicking the arrow but don't have any stations recorded, so it tries to switch to the "edit" function but finds nothing to edit. Location also doesn't matter, tried it in Leesti and getting the same thing.
edit2: Just got the the same runtime error (13) after opening up and clicking around the destination panel. Here's the debug:
edit3: new runtime error, new debug screen
This one happened after saving George Lucas as station. I opened the current station (position panel) selected George Lucas (only option in the list) then clicked the grey arrow to the right of the dropdown field. TCE freezes and presents this error; I have to kill the position panel with the task manager before I can access it.
Has happened on the trade panel, the station panel, the position and destination panels, as well the trade station entry panel. Not all have been the same error or code, but I wasn't able to get screens of those. The one in the SS above happens when clicking the right arrow next to "add unregistered" on the trade station panel. All have been in Diso. Oddly enough, it seemed to work just fine in the frist two systems I used it in, Leesti and CD-34 9020, but I also was not going into all the same panels I was here in Diso.
After getting these a few times, I removed all the TCE files and re-installed (had only gone to two systems, wasn't concerned about losing anything), but it continued to happen. I'm going to remove/re-install again and work off the base 1.38 spreadsheet instead of 1.38c and see if that makes a difference.
edit: 1.38 vs 1.38c doesn't matter, same error - this particular one seems to be happening because I'm clicking the arrow but don't have any stations recorded, so it tries to switch to the "edit" function but finds nothing to edit. Location also doesn't matter, tried it in Leesti and getting the same thing.
edit2: Just got the the same runtime error (13) after opening up and clicking around the destination panel. Here's the debug:
edit3: new runtime error, new debug screen
This one happened after saving George Lucas as station. I opened the current station (position panel) selected George Lucas (only option in the list) then clicked the grey arrow to the right of the dropdown field. TCE freezes and presents this error; I have to kill the position panel with the task manager before I can access it.
Last edited:
Another one:
Clicking any listed station within the Position Panel Results in that error. If I don't select anything in the panel, I can click Hide to close it with no issue.
edit: I was able to reproduce this multiple times, and then I went in and checked the Destination Panel to see if it was happening there too. No issue there, and when I went back to the Position Panel, no more error - I can select with no crash.
Clicking any listed station within the Position Panel Results in that error. If I don't select anything in the panel, I can click Hide to close it with no issue.
edit: I was able to reproduce this multiple times, and then I went in and checked the Destination Panel to see if it was happening there too. No issue there, and when I went back to the Position Panel, no more error - I can select with no crash.
Last edited:
Hi Eventure,
i have something for you to work out. If you search your way home for example, and on this route is no known system yet, TCE says wait and never comes back. Ok, i waited just 1 hour, but also i couldn't break the search.
I'm 3252 Ly away from SOL and just wanted to see this route back to SOL, but forgot that there is no known system for TCE to find a way.
i have something for you to work out.
If you search your way home for example, and on this route is no known system yet, TCE says wait and never comes back. Ok, i waited just 1 hour, but also i couldn't break the search.I'm 3252 Ly away from SOL and just wanted to see this route back to SOL, but forgot that there is no known system for TCE to find a way.
Hi Eventure
The new release of TCE is excellent.
I am only using it at the moment to widen my database of trade prices, but the tool is doing everything that I need it to do and more on top.
The only outstanding issues that I am hitting are as follows :
1. The problem with EliteOCR occasionally bringing up a black screen - this is usually fixable by either turning debugging on and off again or by restarting TCE
2. On the dropdown fields in TCE, the mousewheel does not scroll the dropdown item selection
3. Occasionally, the Star System database screen does not appear when you enter an "unknown" system
You have done brilliantly with your work on this and I will be putting in an extra donation for all the hard work you have been doing.
The new release of TCE is excellent.
I am only using it at the moment to widen my database of trade prices, but the tool is doing everything that I need it to do and more on top.
The only outstanding issues that I am hitting are as follows :
1. The problem with EliteOCR occasionally bringing up a black screen - this is usually fixable by either turning debugging on and off again or by restarting TCE
2. On the dropdown fields in TCE, the mousewheel does not scroll the dropdown item selection
3. Occasionally, the Star System database screen does not appear when you enter an "unknown" system
You have done brilliantly with your work on this and I will be putting in an extra donation for all the hard work you have been doing.
Thanks, I have fixed it in the database.
Did you installed the V1.38b on both pc? This version should fix this issue.
1. Dont know, where to pull the plug. IIRC you said, that this issue appears after changing to a multi-monitor setup, right?
2. Found a routine only for Excel 32bit. Excel 64bit crashes, so i decided not to include it to prevent other issues.
3. Yeah, reported early so i made some changes to the detection routine. Next update should fix this issue.
All other issues are noted, will look into.
Last edited:
Yes it's multi monitor. The workaround doesn't take long so I wouldn't worry too much about it.
I understand now why the mousewheel routine is not included - good decision.
Thank you for all the updates and responses - extra donation has been paid.
Perfectly stable, just hardly any 3rd party addons for it - All work with Office 32bit.
A handful on 64bit.
I am having the 1004 error... 32bit office, Access components installed...
Will repair office and have more of a fiddle / reinstall TCE.
An unregistered station or a station without commodities?
A system I've never been to before so both.
- Status