Hi, I installed for the first time and let it much thru all 350 odd journals I have.
What does the journal reading do?
As the two Community Goals stations were not pre-registered as a market and I had to add them, which I wasn't expecting as it just read my journals files.
So, what does the journal file reading actually do?
Hi, I installed for the first time and let it much thru all 350 odd journals I have.
What does the journal reading do?
As the two Community Goals stations were not pre-registered as a market and I had to add them, which I wasn't expecting as it just read my journals files.
So, what does the journal file reading actually do?
In short once installed and processed all info you have, you still have to record/register at all stations till TCE builds up a picture of visited systems (cavitate any systems you previously visited (explored systems) you will have to manually re-enter if your wanting that data but new systems (1st time visiting) that are unexplored will auto collect as you explore each unexplored planet. Hope that helps
I once again came across a negative rotational period but still was not able to use the "-" key symbol
thanks
Ah.... Apologies Eventure, I stand corrected, it struck me that you did not use keypad "-" symbol but the one on keyboard, in the night, I just verified it, I shall use this key instead of the numerical one on keypad
Trust me it pains me with over 4k systems recorded, some visited 150+ times and to be told different values irks me lol... enjoy TCE it is best one out there
Does anyone use TCE in VR? I have been using it with OVRdrop within a Monitor 2 panel where TCE sits along side G19 on plain black windows background. I have the opacity done to around 40% to see TCE well, but have see-though visuals while the panel is up. I use VoiceAttack to hide/show panel. I also use a font of 80 for all TCE panels, and sit the OVRdrop panel just beyond the throttle yet just behind the messages panel. Very close in VR, but easy readability and usage for navigating TCE while in VR. I also use one of my Vive controllers (sitting between throttle and stick for easy reach) to navigate TCE while the x52pro flies the ship.
Ah.... Apologies Eventure, I stand corrected, it struck me that you did not use keypad "-" symbol but the one on keyboard, in the night, I just verified it, I shall use this key instead of the numerical one on keypad
Hi, I installed for the first time and let it much thru all 350 odd journals I have.
What does the journal reading do?
As the two Community Goals stations were not pre-registered as a market and I had to add them, which I wasn't expecting as it just read my journals files.
So, what does the journal file reading actually do?
Primary, TCE collecting financial and cartography data. The journal logs are missing informations about the exact (within a star system) coordinates of stations in space or on planets, which are important to TCE,
so registering a market can only be done while playing, cause the exact coordinates are available (through the netlogs).
Trust me it pains me with over 4k systems recorded, some visited 150+ times and to be told different values irks me lol... enjoy TCE it is best one out there
The counter of visited star systems and stations are bound actually to the logbook, but it should be possible to add another column to the databases for visits (which would be editable in TCE by the user) to count up the visits.
The counter of visited star systems and stations are bound actually to the logbook, but it should be possible to add another column to the databases for visits (which would be editable in TCE by the user) to count up the visits.
No, it corrects it's self, although jumping to a new system used to act the same way as a restart for values like these, but not in this case?
Files emailed.
I've noticed with another system that has 13 stations the count was correct, then I sorted for STAR CLASS and the count then went wrong, now showing 13 stations as unregistered and the 11 stations I had registered with the count for these registered stations being wrong.
Restarting TCE resolved the issue, jumping to a new system didn't resolve the issue.
I have a odd issue with one station in a system with 13 stations. EXTRA STATION was the last station in system HIP 23641 and when I docked it was being shown as already registered but as the wrong station, which happened to be the last station I'd registered being BOSCOVICH GATEWAY. I then un-docked and entered SC. Then using TCE I deleted BOSCOVICH GATEWAY. Re docked but this time it was being shown as DRAPER POINT which was the 11th station registered in this system I then deleted DRAPER POINT as it was now given the stats for EXTRA STATION after docking. I then also deleted the Unregistered Station entry for EXTRA STATION. Went back to BOSCOVICH GATEWAY registered this station fine, then went back to EXTRA STATION and it was still being shown in TCE as MICHALITSIANOS DOCK (see image below) which was the 10th station registered in this system. However when checking the log the correct station is listed. So I can't dock with this station as it gets registered as a different station immediately upon docking. I turned off AUTO CONNECT WHEN DOCKED, but that still shows the wrong station.
No, it corrects it's self, although jumping to a new system used to act the same way as a restart for values like these, but not in this case?
Files emailed.
I've noticed with another system that has 13 stations the count was correct, then I sorted for STAR CLASS and the count then went wrong, now showing 13 stations as unregistered and the 11 stations I had registered with the count for these registered stations being wrong.
Restarting TCE resolved the issue, jumping to a new system didn't resolve the issue.
Changelog: - Fixed an error when replacing a picture of a ship at the Personal panel.
- Fixed an error with the cash history at the Personal panel.
- Fixed an issue with the manual adding of stars at the Cartography panel.
- Fixed an issue with negative star data values at the Cartography panel.
- Fixed an issue showing sometimes wrong counts of stations in a star system at the Navigation panel.
- Fixed an issue where the launcher not scaling down in size on low resolutions.
- Fixed an issue when replacing the databases to default at the launcher.
- Fixed an issue with the repair process of the Cartography database at the launcher.
Notes:
This full version requires a new installation of TCE and a transfer of the databases from a previous version. Do not install this full version over your old.
Please check here, how to install a new full version, when used an older version before.
1. Rename your current TCE folder (e.g. D:\TCE.old).
2. Install the new full TCE Version (e.g. D:\TCE).
3. Run the TCE Launcher.
4. Select Database -> Transfer -> Choose old folder (D:\TCE.old).
5. After scanning, select Start Transfer.
If you find an error, please report and use the Report a Bug button at the launcher and don't forget to copy the error details.
I like to remind any user, who wants to use TCE in french to help in translating the
latest interface phrases at OneSky. Thanks in advance.
There were a bunch of issues, you all have found, that have to be fixed and the V1.6.0 contains all new stuff for the ED 2.4 already, so I don't want to hold it back.
See the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.IndexOutOfRangeException: Index was outside the bounds of the array.
at System.Array.InternalGetReference(Void* elemRef, Int32 rank, Int32* pIndices)
at System.Array.GetValue(Int32 index1, Int32 index2)
at Microsoft.VisualBasic.CompilerServices.Symbols.Container.GetArrayValue(Object[] Indices)
at Microsoft.VisualBasic.CompilerServices.NewLateBinding.InternalLateIndexGet(Object Instance, Object[] Arguments, String[] ArgumentNames, Boolean ReportErrors, ResolutionFailure& Failure, Boolean[] CopyBack)
at Microsoft.VisualBasic.CompilerServices.NewLateBinding.ObjectLateInvokeDefault(Object Instance, Object[] Arguments, String[] ArgumentNames, Boolean ReportErrors, Boolean[] CopyBack)
at Trade_Computer_Extension.Panel_Trade_Overview.BTN_BestBuy_Click(Object sender, EventArgs e) in F:\Trade Computer Extension\Trade Computer Extension\Panel_Trade_Overview.vb:line 3044
at System.Windows.Forms.Control.OnClick(EventArgs e)
at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.Label.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.
UPDATE:
The unregistered stations count seems to be working as expected now, cheers
