Well that's better than nothing, and with your speed at updating i bet we will have that function withing a few days ;P
- Status
Well that's better than nothing, and with your speed at updating i bet we will have that function withing a few days ;P
I keep getting a runtime error 52
can someone help?
can someone help?
A little more infos, please. Where did you get it, what code line (by pressing debug, screenshot can be helpful), what did you before the error? Thanks
Yes, but dont install the full version, its overrides your database.
Last edited:
Cant even post a link due to Forums Rules...
Hello, I tried to use this great tool today however I also received the runtime error line 52. Not trying to be silly and say something stupid but it was on line 52 in the debug screen and seemed like an address or data source could not be located. I think it started Net....something. I will try again later and post a screen grab.
looks like you've done some awesome work here and I hope it's a simple issue.
Anyway thanks for taking the time to help
looks like you've done some awesome work here and I hope it's a simple issue.
Anyway thanks for taking the time to help
Hi Eventure,
Any suggestions for this ?
Run time error 1004: Initialization of the data source failed. Debug goes to DB_Import module .Refresh BackgroundQuery:=False
Changing this to just .Refresh as per previous fix didn't work, debug goes to same point.
Win 8.1 x6x, Excel 2013 (15.0.4675.100) - x64, TCE 1.31b installer with 1.32a and new English .ini file, EliteOCR 0.5.1
Many thanks for your awesome work - I suggest you set up a website with a donations link
Any suggestions for this ?
Run time error 1004: Initialization of the data source failed. Debug goes to DB_Import module .Refresh BackgroundQuery:=False
Changing this to just .Refresh as per previous fix didn't work, debug goes to same point.
Win 8.1 x6x, Excel 2013 (15.0.4675.100) - x64, TCE 1.31b installer with 1.32a and new English .ini file, EliteOCR 0.5.1
Many thanks for your awesome work - I suggest you set up a website with a donations link
Hi, I noticed another bug in the trade advisor window on the left down side:
When I open the "Trade Information" window by pressing "Trade" then it shows in the trade advisor window correctly Gold as the best commodity to trade to the other station. When I then use the slider by just clicking on it, the Gold disappears completly from the first line and the entire window.
When I open the "Trade Information" window by pressing "Trade" then it shows in the trade advisor window correctly Gold as the best commodity to trade to the other station. When I then use the slider by just clicking on it, the Gold disappears completly from the first line and the entire window.
Each day at the first start of TCE a backup is created (TCE\Backup). But saving the DB manually gets to the same goal. The display error with the Trade Advisor will be fix next update.
Last edited:
Found a Bug:
Sometimes, when trying to open the commodity screen I get a runtime error.
Its not consistent and usually happens after I OCR a stations data, save then move to the next station, at which point opening the commodity screen will throw the error below.
So far, iirc, it has occurred at stations where I had previously added / OCR'd the station, so not new.
Screenshot of debug attached:
Sometimes, when trying to open the commodity screen I get a runtime error.
Its not consistent and usually happens after I OCR a stations data, save then move to the next station, at which point opening the commodity screen will throw the error below.
So far, iirc, it has occurred at stations where I had previously added / OCR'd the station, so not new.
Screenshot of debug attached:
Yes I'm getting run time errors as well, have 2007 Excel, Win7 64 , TCE its not showing the station, I was in at DISO, went to another system Guest station, to see if it would update, but it still showed the last system I was in before arriving around LAVE. Tried use the trade route from current system but said I was out of range, whether or not , I was using it correctly , as it was a first time , is any ones guess.
Also running TCE slowed down my system in game running with VA, nothing else. I do run Voice Attack RegulatedNoise & elite-copilot-v041a with ED with no problems at all.
GOOD effort , lot of work well done , will see how further dev goes, but , cant see me using it with my current box unless I upgrade
Also running TCE slowed down my system in game running with VA, nothing else. I do run Voice Attack RegulatedNoise & elite-copilot-v041a with ED with no problems at all.
GOOD effort , lot of work well done , will see how further dev goes, but , cant see me using it with my current box unless I upgrade
Hi Eventure,
Any suggestions for this ?
Run time error 1004: Initialization of the data source failed. Debug goes to DB_Import module .Refresh BackgroundQuery:=False
Changing this to just .Refresh as per previous fix didn't work, debug goes to same point.
Win 8.1 x6x, Excel 2013 (15.0.4675.100) - x64, TCE 1.31b installer with 1.32a and new English .ini file, EliteOCR 0.5.1
Many thanks for your awesome work - I suggest you set up a website with a donations link
after 3hours + trying to get this to work, fore some reason for me the .exe installer didn't work but managed to get the non installer to work, i'd finally managed to get the folder paths to work i've now got the same 1004 error
any idea how to fix as i love the look of the mod and want to try to out , but its a total pain to install so far
Edit : it's a error from 2013 as i've ended up installing a my old copy of 2007 on my pc and now have got the mod to work so far
edit 2 : now getting the error 13 and have tried the fix from reading the forum but still not working
Last edited:
managed to get it working after the 13 error i posted above , added a station and its commodity's without a problem , jumped to my next station added it without a problem , but as soon as i started to add the commodity data for Lyulka Ring and got this error when i tried to save the new data
after closing and reopening the mod , i'm now stuck with a run-time 9 error saying Subscript out of range
after closing and reopening the mod , i'm now stuck with a run-time 9 error saying Subscript out of range
Last edited:
Yes I'm getting run time errors as well, have 2007 Excel, Win7 64 , TCE its not showing the station, I was in at DISO, went to another system Guest station, to see if it would update, but it still showed the last system I was in before arriving around LAVE. Tried use the trade route from current system but said I was out of range, whether or not , I was using it correctly , as it was a first time , is any ones guess.
Also running TCE slowed down my system in game running with VA, nothing else. I do run Voice Attack RegulatedNoise & elite-copilot-v041a with ED with no problems at all.
GOOD effort , lot of work well done , will see how further dev goes, but , cant see me using it with my current box unless I upgrade
If your ShipLog panel is empty, TCE didnt found the netlog or the AppConfig.xml didnt have the VerboseLogging="1" in it. Please check the AppConfig.xml first.
Will be fixed in next update. The 1004 error cant be an Excel 2013 problem, because of i using it at the moment and all runs fine with it. Perhaps a Win 8 with Excel 2013 problem? I am using Win 7 x64 Home Premium with Excel 2013 x64 (15.0.4675.1000).
Last edited:
Hello,
In version 1.32a the following happens:
1. When a new star is discovered and added to the database, the exploration drop down is not usable as you cannot see the text in the list.
2. With the station industries drop down, Terraforming is not available as a selection. Admittedly, these are mostly useless for bi-directional trade routes, but you might want to add it for us OCD types
3. The commodity Performance Enhancers text is too large in the imports section of the trade window - it over flows into the price field.
I also get an error under the following conditions:
1. Use trade scout to find a route.
2. Click route to display on trade window.
3. Hide trade window.
4. Click Commodity button.
This is the error:
Perhaps, and yeah I know it is time, but a currently known bug list as part of the first post would help prevent duplicate bugs being reported? This thread is now rather large - a testament to how useful this is I guess.
I will report when I find anything else. Great job though, really awesome work.
Kind regards
Tenebris
In version 1.32a the following happens:
1. When a new star is discovered and added to the database, the exploration drop down is not usable as you cannot see the text in the list.
2. With the station industries drop down, Terraforming is not available as a selection. Admittedly, these are mostly useless for bi-directional trade routes, but you might want to add it for us OCD types
3. The commodity Performance Enhancers text is too large in the imports section of the trade window - it over flows into the price field.
I also get an error under the following conditions:
1. Use trade scout to find a route.
2. Click route to display on trade window.
3. Hide trade window.
4. Click Commodity button.
This is the error:
Perhaps, and yeah I know it is time, but a currently known bug list as part of the first post would help prevent duplicate bugs being reported? This thread is now rather large - a testament to how useful this is I guess.
I will report when I find anything else. Great job though, really awesome work.
Kind regards
Tenebris
Last edited:
Will be fixed in next update. The 1004 error cant be an Excel 2013 problem, because of i using it at the moment and all runs fine with it. Perhaps a Win 8 with Excel 2013 problem? I am using Win 7 x64 Home Premium with Excel 2013 x64 (15.0.4675.1000).[/QUOTE]
could be down to 8.1 as i'm running that, but i meant to add that the last error happened after i swapped to 2007 with all service packs , i managed to get it working again by dropping the non installer pack back in to the folder but left the ini file in ( but not tested adding stuff yet to it to see if it bugs out again yet)
could be down to 8.1 as i'm running that, but i meant to add that the last error happened after i swapped to 2007 with all service packs , i managed to get it working again by dropping the non installer pack back in to the folder but left the ini file in ( but not tested adding stuff yet to it to see if it bugs out again yet)
I am at work so can't test this at present but I think I may have an idea on the 1004 error.
OLEDB v12 provider is not re-registered after removing Office 2007. I had a parallel install of Office 2007 and 2013 but removed 2007 a while ago.
Chances are we need to reinstall the 32bit Access Data Base Engine http://www.microsoft.com/en-us/download/details.aspx?id=23734 The download is for Office 2007 but works with 2010 so should work with 2013 as well.
I'll give this a go later but I wont be home until about 6 hours after this post.
OLEDB v12 provider is not re-registered after removing Office 2007. I had a parallel install of Office 2007 and 2013 but removed 2007 a while ago.
Chances are we need to reinstall the 32bit Access Data Base Engine http://www.microsoft.com/en-us/download/details.aspx?id=23734 The download is for Office 2007 but works with 2010 so should work with 2013 as well.
I'll give this a go later but I wont be home until about 6 hours after this post.
- Status