Release Trade Computer Extension Mk.II

Hi Eventure,

I tried to get started with the 1.4.0 Beta but ran in to a few troubles right off the get go. First I tried installing and importing my existing Beta database. After a bit of fiddling, it did import and I was able to open the app. However, a lot of the data just didn't seem right to me (my problem, not yours), and most importantly I could not find the Credits tab or any way how to make any changes to my credit balance. I then decided to start with a fresh Database, which I should have done in the first place to give you the cleanest data set possible for testing purposes. However, after Resetting my database, I opened the app and the entire overlay was offset to the right about half my screen width. I could move some of the tabs over to proper postition, but other tabs I could not move at all. See the first video clip: http://plays.tv/video/57effb5707b89aad6f/-tcebeta-window-offset

The I decided to uninstall and reinstall the app and start totally fresh. Same problem : http://plays.tv/video/57effb709b5f9c4cf8/-tcebeta-window-offset-2

For your information, I am on a 2-monitor setup. My primary/center monitor is my game monitor and I play all games in single-screen. My #2 monitor is set to the left of my Main, and is only an accessory monitor where I run my internet browser, MSI Afterburner usage graphs, email, etc. I do not know if this is impacting the offsetting of the screen, but I just don't know. I find it odd that when I did import myexisting database, I did not have this problem. After resetting the database but not uninstall/reinstalling, the problem popped up and persisted through a reinstall and fresh DB.

Any help or suggestions you can offer I will test. I hope to provide as much assistance as I can to you to have this app perfectly ready for 2.2 release.
 
Hi Eventure,

I tried to get started with the 1.4.0 Beta but ran in to a few troubles right off the get go. First I tried installing and importing my existing Beta database. After a bit of fiddling, it did import and I was able to open the app. However, a lot of the data just didn't seem right to me (my problem, not yours), and most importantly I could not find the Credits tab or any way how to make any changes to my credit balance. I then decided to start with a fresh Database, which I should have done in the first place to give you the cleanest data set possible for testing purposes. However, after Resetting my database, I opened the app and the entire overlay was offset to the right about half my screen width. I could move some of the tabs over to proper postition, but other tabs I could not move at all. See the first video clip: http://plays.tv/video/57effb5707b89aad6f/-tcebeta-window-offset

The I decided to uninstall and reinstall the app and start totally fresh. Same problem : http://plays.tv/video/57effb709b5f9c4cf8/-tcebeta-window-offset-2

For your information, I am on a 2-monitor setup. My primary/center monitor is my game monitor and I play all games in single-screen. My #2 monitor is set to the left of my Main, and is only an accessory monitor where I run my internet browser, MSI Afterburner usage graphs, email, etc. I do not know if this is impacting the offsetting of the screen, but I just don't know. I find it odd that when I did import myexisting database, I did not have this problem. After resetting the database but not uninstall/reinstalling, the problem popped up and persisted through a reinstall and fresh DB.

Any help or suggestions you can offer I will test. I hope to provide as much assistance as I can to you to have this app perfectly ready for 2.2 release.

TCE is using the virtual screensize now and yes, the problem here is your second monitor.
When you import your old database, the panel positions is also transfered. When using a new database, TCE detects the first start and tries to position the panel to your resolution, but apparently failing here.
Please, go into CONTROL > PANEL and move the entire panel back to your first screen by click&hold onto the MAIN UI bar below the trade button. Will be fixed with the Beta2.

BTW, is the rest of the panel shown at your secondary monitor? I like to know. Thanks

PS: You will find the new Credit Overview at the new Personal panel on the right side. Each category value can be freely edited by double-click onto the value itself.
 
Last edited:
I don't have the Beta so I cant test your you version but either way I have a feature request. When the navigator is used to pick my next port can the system name be select-able with the mouse. This way I can just Cntr C - V to pilot the ship in game. OR if it is possible when I pick 'Destination' can the system name be copied to the clipboard.
 
oh dear

Full-Version (1.4.0 Beta1) released:



Changelog:
- Added completely reworked Personal panel showing rank progress, ship loadout, credit overview, active bounties, notes, crews and history graphs.
- Added small rework Trade Overview, Market and Location Database panel
- Added new Cargo panel to track your current cargo load.
- Added new Cartography Database panel showing scanned data of stars and bodies, incl. star system survey.
- Added Faction, Faction State and colored Security Level to the Position Display, when traveling.
- Added processing of 70 events from the new journal.
- Added processing of unprocessed journal files at start up of TCE.
- Added Faction, Faction State, Goverment and Security Level to Navigation, Trade Overview and Market Database panel.
- Added Cash History graph to the Personal panel, click the category for displaying.
- Added Commodity Info panel incl. Commodity Average Price History to the Commodity panel, click a commodity to display it.
- Added new income categories to the cash overview of the reworked Personal panel.
- Added Crew overview and automatic commission deduction of certain income at the reworked Personal panel.
- Added automatic adjustment of the current Jump Limit, depending on cargo load at the reworked Personal panel.
- Added new player.data file, which stores most player informations. The TCE_Personal.db file now stores secondary data, e.g. all notes.
- Added more game/TCE data to the TCE.config file.
- Added TCE-Relay (V.35 beta) extension to the TCE installation.
- Added TCE-Relay price update button to the Launcher. Click it to update market prices by using online EDDB/EDDN data.
- Added reduced overall memory usage.
- Added version number of installed extensions at the Launcher.
- Added persistance of filter settings for star systems and region summary, when changing between them at the Navigation panel.
- Added improved overall work performance of the Navigation panel.
- Added fade in/out of Main UI, when HIDE TCE key is pressed.
- Added Event Reporter displaying event informations and more.
- Added beta Text-To-Speech system for events. Activate it at the Options panel.
- Added storing of uncollected bounties. They are displayed at the Personal panel.
- Added automatic fade out of UI interface on interdictions.
- Added option to automatically connect to EDMC when docked at a registered market.
- Added option to let EDMC (V2.17) send the market data to EDDN.
- Added 'Visualize' button to the Summary panel.
- Added improved performance on read/write operations of large databases.
- Added last sound to finalize SoundFX.
- Added updated unregistered market database, holding now 49k markets, thanks to Supporter 'flat'.
- Added error corrected star system database for names and coordinates, thanks to Supporter 'flat'.
- Added salvage commodities to Database.
- Added star system name, distance to star and stock level informations at the Route Finder Panel.
- Added Minimap for planetary flights to find stored planetary locations much easier.
- Added stock level to the export tab at the Trade Overview panel.
- Added reworked Route Finder panel to show more data about a route.
- Added hiding the reworked filter setting display at the Route Finder Panel.
- Added export of visited star system names to ED on quit of TCE.
- Added Beluga ship type and picture.
- Added bunch of translation text, russian and spanish incomplete.
- Added TCE Manual for TCE V1.40+.
- Removed Sector ID display from the Position Display, showing the body name instead, you are close to.
- Removed manual Jump Range selection of the Navigation panel. It is now handled automatically.
- Removed the selection of an unregistered market from the Market Database panel. It is now automatically selected, when adding an market.
- Removed 'minimized on start' options for support panels (Waypoints, Summary and Cargo). They always start minimized now.
- Removed the obsolete Star System Database panel.
- Removed the Credit Balance panel and moved the overview into the new Personal panel.
- Fixed an issue when detecting actual resolution, TCE takes data now from the virtual screen size, not only from the primary screen.
- Fixed a bug with Preview Route at the Route Finder panel.
- Fixed a small HUD color bug.
- Fixed a bug in updating the Summary panel.
- Fixed a bug with the clipboard.
- Fixed a bug when highlighting an entry in a list.
- Fixed a bug when storing price data from EDMC and the market name differs from your current.
- Fixed a bug when upgrading a database at the launcher.
- Fixed an issue with the installation of TCE, if no C:\ drive is present.
- Fixed an issue when exiting ED and TCE stays hidden.
- Fixed an issue in sizing the Main UI, when using a resolution below 1920x1080.
Note:
This version is only for users, who participate in the ED 1.7/2.2 Beta. If you don't participate, it is not fully functional.
Because of the beta status of TCE, you may encounter bugs or crashes. If so, please report back, provide the relevant journal file and database, if possible or required.
Please consult the updated manual for more information about the new features or make a post with your question.

Thanks.

Hi eventure I am a horizons beta tester 2.2 beta 4

but I'm having problems right at the start
installed it to "D:tce14" a new folder
run the program then the config screen comes up with the settings
but everything shows unknown and under settings it says not selected or notfound.

but I cannot click on anything as just under the keybind / database boxes it just says
"checking installed extensions- please wait" with a dot chasing its tail in a circle..

and that's it. it will not move past this . ive left it running for 30mins and its still the same.
I cant even try to check database or tell it where ed is..
everytime I start it. it goes straight to checking installed mode.

cmdr Bupu
 
Update (1.4.0 Beta2) released:



Changelog:
- Fixed an issue with panel positions when using multiple monitors.
- Fixed an issue on version check, if an extension is not installed.

Note:
Copy the content into your TCE folder to update your version.
 
I don't have the Beta so I cant test your you version but either way I have a feature request. When the navigator is used to pick my next port can the system name be select-able with the mouse. This way I can just Cntr C - V to pilot the ship in game. OR if it is possible when I pick 'Destination' can the system name be copied to the clipboard.

The clipboard holds your destination star system since V1.0. So pick your destination, go into the galaxy map and paste the name into the search field.

but I cannot click on anything as just under the keybind / database boxes it just says
"checking installed extensions- please wait" with a dot chasing its tail in a circle..

Found the issue and fixed it with the update above.
 
Last edited:
Hello. I have an issue with TCE. I installed as in manual but when i click launch nothing happens. It just says please exit ED and when i exit the game it says please start ED and when im back in the game it says LAUNCH and again please exit ED and so on. How can i fix this ? All database is green when i click verify... it just that i do not see any panels in game ... please help me :)
 
TCE beta

transfered data from standard tce to tce beta

on 1st run i had a popup asking about journals Yes/No , hit yes , nothing seems to happen , restarted and hit No
clicking on personal , i get a "index was outside bounds of array"
also now Tce is being marked as a virius with AVG antivirus
i'm in a system that has not been logged by tce yet ,,
where would i now find any of the files you may require, for checking
 
Hello. I have an issue with TCE. I installed as in manual but when i click launch nothing happens. It just says please exit ED and when i exit the game it says please start ED and when im back in the game it says LAUNCH and again please exit ED and so on. How can i fix this ? All database is green when i click verify... it just that i do not see any panels in game ... please help me :)

What ED version you have selected at the TCE launcher? Public_Test_Server?
Is the Game Log and Journal showing "Detected" and VerboseLogging showing "Active"?
To see the overlay ingame, you have to select "Borderless Window Mode" at the options of ED.

TCE beta

transfered data from standard tce to tce beta

on 1st run i had a popup asking about journals Yes/No , hit yes , nothing seems to happen , restarted and hit No
clicking on personal , i get a "index was outside bounds of array"
also now Tce is being marked as a virius with AVG antivirus
i'm in a system that has not been logged by tce yet ,,
where would i now find any of the files you may require, for checking

TCE isn't a virus, AVG is always the issue by blocking/reporting things.

TCE found unprocessed journal files at start and want to process them before launching.
When selecting "YES", TCE starts processing and showing you the list of journals and events. How many unprocessed are reported?
When selecting "NO", TCE skips all but the last and contiune to launch.

I need the full text of the error message, click details and copy/paste it into your post.
Otherwise, send me your DB folder, the player.data and TCE.config file from your installation for a check to eventure(at)ki.tng.de.
Thanks.
 
Last edited:
i have tried with TCE 1.9.3.1 versions and it works well the only issue to it is that when i hit CONNECT button under TRADE button it gives me an ERROR in red. i tought that this extension will give me a full database of stations information on comodityes that i could trade from station to station just like BPC would do back in the day... but here i see that i have to insert all prices with price scan and travel to all station to get the infos... is there a way to maximes the database faster ? or some similar applications that could help me with TCE?
 
in 1.4.0 versions of TCE i have selected 2.1 horrizon 64 bit game log is detected VerboseLogging is active and game journal not detected
 
TCE beta

transfered data from standard tce to tce beta

on 1st run i had a popup asking about journals Yes/No , hit yes , nothing seems to happen , restarted and hit No

I know nothing ~seemed~ to happen when you clicked yes on Importing Journals, but it was working. I experienced this as well on my first install. It is just not a very fast process. I had 10 (I think) unread journals, most accounting for about 2 hours of gameplay each, and it took a good 12-15 minutes to parse all of it. If you wait patiently after clicking Yes, you will notice that the Right Hand windowbox will scroll as it reads each entry of the current Journal, and on the Left Hand windowbox each Journal Listing will disappear from screen as it is completed. Just give it some time.


Also, Norton has ALWAYS flagged the TCE installer as a virus for me, I have to force it to run anyway. It's probably just how the app is checking other ED files.
 
i have tried with TCE 1.9.3.1 versions and it works well the only issue to it is that when i hit CONNECT button under TRADE button it gives me an ERROR in red. i tought that this extension will give me a full database of stations information on comodityes that i could trade from station to station just like BPC would do back in the day... but here i see that i have to insert all prices with price scan and travel to all station to get the infos... is there a way to maximes the database faster ? or some similar applications that could help me with TCE?

Yes, TCE-Relay would then do the job, filling your database with markets around your position. Please read this post for the tool.

in 1.4.0 versions of TCE i have selected 2.1 horrizon 64 bit game log is detected VerboseLogging is active and game journal not detected

That's the wrong version of ED, the beta of ED is the 2.2 and it is installed to PUBLIC_TEST_SERVER_64. This version you have to select.
 
I just sent you the crash debug that occured when trying to add/import market, I have also restarted the app and tried to manually add commodities, though when clicking either View Prices or Scan Prices, each button flashes red with "No Market"
 
1.4.0 Beta 4 Personal Tab, Credit Balance issue.

TCE correctly read when I paid 300,000 Cr. to speed up my next powerplay allotments, and recorded it properly. However when I went to next system I performed two things: 1 I collected my powerplay weekly dividend (was recorded), and turned in 50 powerplay control items for 5,000 Cr. Payout. TCE did record my transfer of the cargo, but did not record the 5,000 credit even after I made a purchase transaction at the commodity market. It looks as though there is no Amount modifier for the PloerPlayDeliver Event

"StationType":"Coriolis", "StarSystem":"CF 464", "Faction":"Kadrusa Gold Life Services", "Allegiance":"Empire", "Economy":"$economy_HighTech;", "Economy_Localised":"High tech", "Government":"$government_Corporate;", "Government_Localised":"Corporate", "Security":"$SYSTEM_SECURITY_medium;", "Security_Localised":"Medium Security" }
{ "timestamp":"2016-10-02T15:48:43Z", "event":"PowerplaySalary", "Power":"Denton Patreus", "Amount":1000 }
{ "timestamp":"2016-10-02T15:49:21Z", "event":"PowerplayDeliver", "Power":"Denton Patreus", "Type":"$patreusgarisonsupplies_name;", "Type_Localised":"Patreus Garrison Supplies", "Count":50 }
{ "timestamp":"2016-10-02T15:50:58Z", "event":"MarketBuy", "Type":"pesticides", "Count":10, "BuyPrice":75, "TotalCost":750 }
 
yeah aparently my game version is only 2.1 i do not have acces to 2.2 i dont understand why.. i will play with 3.9 version as is it very stable. can you explain how to use tce relay ? i enter ED game , i start tce relay and then TCE extension itself ? or how is the order ? because while in game with TCE started , opening the relay will still give me error trying to connect .. i have starter database with outdated prices ...
 
yeah aparently my game version is only 2.1 i do not have acces to 2.2 i dont understand why.. i will play with 3.9 version as is it very stable. can you explain how to use tce relay ? i enter ED game , i start tce relay and then TCE extension itself ? or how is the order ? because while in game with TCE started , opening the relay will still give me error trying to connect .. i have starter database with outdated prices ...

The most recent version Eventure Posted (1.4.0) is only for those people playing the 2.2 Beta. If you dont have beta access and are still playing 2.1 (look in bottom right corner of game window, it should say " Elite:Dangerous 2.2 (Beta 4)" if you're in beta. If you are only playing 2.1, then you need to be using 1.3.9 (I think?)

Edit: As for the commodity information, I think you will need to use EDMC and get new commodity information at each station you visit for now, at least until 2.2 goes public and TCE 1.4.x goes main.
 
Last edited:
pff i just wanted to update to the latest prices this starter db as i wanna make some cash trading... and i do not find any other db around... i hoped that i will be able to update the entire DB with latest prices for those 150 stations markets
 
Back
Top Bottom