@GhastousIf you select Thrustmaster Warthog preset within ED without using target then you have the keyboard keys that dont do a thing and you cant use the mouse either. Its pretty dam stupied if you ask me cos Flight X stick you plug it in and its sets the buttons up on the stick and also u have access to all you keyboard bindings and mouse but nope not with the warthog it simply removes all them so which means i have to go though every single option and put them back on which is a waste of my time.
Hi @mackster ,Got rid of my original problem, its all working now after a windows update :s
Only question I have now is, my rudder isnt working (thrustmaster TFRP). Do I have to manually put that in?
Any help people could provide would be greatly appreciated.Running script: C:\AD-EDWarthogEnhancedScript-4.3.0\Warthog Script\AD_ED_v4.3.0.tmc
Mapped plugin module "C:\Program Files (x86)\Thrustmaster\TARGET\Plugins\sys.dll"
Compile Succeeded.
Physical USB HID devices managed by script!
Currently plugged USB HID devices[2]:
1: "Throttle - HOTAS Warthog" - "USB\VID_044F&PID_0404&REV_0100"
2: "Joystick - HOTAS Warthog" - "USB\VID_044F&PID_0402&REV_0100"
USB HID device "Throttle - HOTAS Warthog"(USB\VID_044F&PID_0404\9&247C48&0&3) selected
USB HID device "Joystick - HOTAS Warthog"(USB\VID_044F&PID_0402\A&D2F9BBB&0&2) selected
USB HID device with hardware id "VID_044F&PID_0403" cannot be found
USB HID device with hardware id "VID_044F&PID_B10B" cannot be found
USB HID device with hardware id "VID_044F&PID_B687" cannot be found
USB HID device with hardware id "VID_044F&PID_0405" cannot be found
USB HID device with hardware id "VID_044F&PID_0406" cannot be found
USB HID device with hardware id "VID_044F&PID_0407" cannot be found
USB HID device with hardware id "VID_044F&PID_0408" cannot be found
Virtual HID devices managed by script!
Connecting virtual joystick...Script stopped!
Done
Device name set to Thrustmaster Combined
Runtime Error: STOP request received while running main on line 53 in "C:\AD-EDWarthogEnhancedScript-4.3.0\Warthog Script\AD_ED_v4.3.0.tmc"
Error:Script run timed out!
Yeah I'm all the way on version 20H2, when running the script the Joystick & Throttle disappear from the Game Controllers panel (that you can pull up with joy.cpl) but when running the script they disappear and nothing replaces them. The script just locks up when trying to setup the virtual device. It creates a Guillemot_HID_Device_21 device but causes a Driver Error for the new device and the Joystick & Throttle and then eventually the script gives up and the Joystick & Throttle return.Hi @Sizix ,
Can we assume when you swapped out the motherboard and CPU you reinstalled Windows?
If so, this may be a Windows version issue.
To test, try this...
1) Before startig the script, Open the windows joystick control panel (run joy.cpl).
2) Note your controllers listed.
3) Run the script.
4) Recheck joy.cpl and note the controllers again.
In step 2 you should see both the Thrusmaster Joystick and Thrustmaster Throttle
In step 4 you should see Thrustmaster Combined Controller and the Joystick and Throttle should not appear.
If you are seeing the Joystick , Throttle and the Combined controller, then you are seeing the USB issue that Windows Update introduced after v1909.
This is a common issue.
I got around this by backing out the update and reverting to 1909, then tweaking windows update so it won't auto update.
Hope this helps.
Let us know how you get on.
Clicker